IPad 2 Mirroring: Change Deminsion Options.

When I first connected my iPad 2 to my HD TV, using the (HDMI) Digital AV Adapter, I was given (on iPad) display options. Now, when I connect my iPad 2 to the TV it works fine but I am not presented with the option to change the display deminsion(s). Does anyone know how I can change or make the choices available again? Thanks!
Jeff

Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone and aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in settings > AirPlay > Adjust for Overscan for the best setting that suits you.

Similar Messages

HT204409 How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

If you are saying that the iPod asks for the password for the network and you do not know it, what may work is to turn on iCloud keychain for the iPod and iPad., Thet may sync the password from the iPad to the iPod
http://9to5mac.com/2013/10/26/how-to-setup-and-use-icloud-keychain-for-mavericks -and-ios-7/
Otherwise you will have to go into the router settings and reset the wifi password in the router

Got an ipad and changed the gender on Siri to male, I want to change it back to female but in settings in the 'Siri' part the gender changing option isn't there??

Got an ipad and changed the gender on Siri to male, I want to change it back to female but in settings it won't let me
The option to change the gender isn't there??

The ability to change Siri's gender is tied to the Language setting. For example, English (United Kingdom) doesn't have this option, but English (United States) does. Reset the language and you should be able to change the gender, if the feature is available for the specific language.

Problem using iPad mirroring with an Apple TV and 4:3 Projector

I'm a teacher and I've been using my iPad 2 in the classroom for about a year and a half. I would use Apple's VGA Adapter to connect to my projector, which worked fine. I just didn't like being tied down, and the dock connector would come loose very easily and lose connection to the projector, which interrupted the flow of the lesson.
So this summer, I got an Apple TV and a projector with an HDMI port so I could start using Airplay Mirroring to get the iPad screen onto the projector. But I'm having trouble with the aspect ratio. Forgive my drawing, but the genius at the Apple store had a hard time understanding my explanation, so I'm hoping this will help show what I mean.
My projector (ViewSonic DLP PJD5133) can be set to either a 4:3 or 16:9 aspect ratio (4:3, 800x600 is the native resolution). My projector screen in the front of the classroom is 4:3, so when the projector is set to 4:3, the image fills up the screen (which is what I want - it needs to be as big as possible so the entire class can see it clearly; plus it means all the output pixels are being used). When the projector is set to 16:9, the image is letterboxed (not ideal unless I'm showing a widescreen video or image).
The Apple TV's native aspect ratio is widescreen, and the iPad's native aspect ratio is 4:3, so if you use Airplay mirroring on a widescreen TV, the Apple TV will pillarbox the image (add horizontal black bars on each side), so that the image will not be stretched/distorted. (I know that it will show widescreen videos and a few widescreen-ready apps without the pillarbox, but the apps I use in class - Keynote, Noteshelf, etc. - don't fall in that category). The effect on my projector screen is a tiny 4:3 image taking up half the area it would have taken if I had used the VGA connection.
So in the Apple TV, I went to Settings>Audio & Video>TV resolution, and chose 800x600 60Hz (the max 4:3 resolution for my projector). Since the Apple TV is natively widescreen, it seems to accomplish this change be stretching the image vertically; but it basically works because the Apple TV home screen fills up the projector screen. However, when I turn on Airplay Mirroring on my iPad, the image does not fill up the screen. The Apple TV still puts a pillarbox on the image, so I end up with a distorted, square image of my iPad screen. It's the right height - the max 600 pixels for my projector - but it's not as wide as it should/could be.
Is there a setting that I'm missing? I understand that the Apple TV has to stretch its home screen image to accommodate the 4:3 resolution, but I think it should be smart enough to realize that if it's receiving a 4:3 image from the iPad and sending it out to a 4:3 TV, it doesn't need to pillarbox the image.
Before you answer - this is not a problem with the projector settings, and my Apple TV is not defective. You could simulate what's happening on your Apple TV, even if it's hooked up to a widescreen TV. In the Apple TV settings, change the TV Resolution to 800x600 as mentioned above (or any other of the 4:3 options). Now go to the Apple TV home screen, and note the amount of space the image is taking up on your screen (on a widescreen TV, it will be pillarboxed, and it will look like it's been squished horizontally). Then turn on Airplay mirroring on the iPad, and you'll see that the iPad image does not have the same width as the Apple TV home screen and it looks square/squished.
Also, while my projector does have a zoom function, it will not magnify the small iPad mirror image correctly (if I were to leave the Apple TV and projector on a 16:9 setting). It cuts off the top and sides. But even if it didn't crop the image, it's a digital zoom, so that option still won't fix the fact that I'm not getting a full 800x600 image on the projector. The same problem would apply if I were to move the projector farther away from the screen (so that the widescreen image takes up the full height of the projector screen, while spilling off the sides). I'll still have a lower resolution image, which isn't ideal since I'm often showing text on the screen through Keynote. Also, widescreen videos wouldn't fit on the screen, and I can't move the projector easily because it's fixed to the ceiling.
Sorry for the long explanation. Any ideas? I'd really appreciate some insight.

We have the same problem, and not only with ipads. Macbook Air is doing something similar. it can only use airplay with 1080 and 720 resolution, so the image is squeezed on a 4:3 projector. We use AppleTV 3 and Mountain Lion OS. We use ATVPRO from Kanex.
Apple must get its act together and fix this, they promise gold and green forests, but nothing works.
DO SOMETHING!

If someone has wiped my ipad and changed passwords on icloud how do i get my data back

if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks

How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it?

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Can someone help me? How do I change the option to pick where or what program I want to open a file after I've downloaded it? I tried to look for an option for this and can't find it anywhere.

For example I download a file and I click on it and there will sometimes be a window that opens saying what program I want to open the file with? And then it'll also have a check box saying if I want to use this program for all files I download. I can't change it when I download the file because that one file I keep downloading keeps crashing my Firefox and I have to force quit. It's really getting on my nerves. It's an online statement I'm trying to view and I want to get rid of that problem!! Is there anyway to change that option without going to that download page?

I would recommend going into device manager on your PC and making sure that you have correctly installed the IR dongle. Also what version of hotsync manager are you currently using?
Post relates to: Treo 800w (Sprint)

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

HT4623 My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

Hi Mikki.J.H,
Thanks for using Apple Support Communities. This article has some information regarding SIM PINs that may help:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/ht1316
Cheers,
- Ari

When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

RE: (forte-users) Changing replication options in Fscript? -Tric k

There was one attribute of a service object you couldn't change in fscript..
I think it was whether the service was replicated at all or not (not the
same as setting rep count to 1!).
As Clint would say, "improvise.."
We exported the project containing the service object and snipped out the
part pertaining to the service object in to a little export file.
Then in an fscript script you can branch/checkout the service object and
import the snipped out export file to change the replicated yes/no flag.
Then do whatever other fscript commands make sense.. We tended to leave the
system baseline with the "true" replication flags and let developers run
this little script (only branching the services) to de-replicate all the
replicated services prior to trying to run from their workspace, etc.
Worked like a charm.
-Greg
-----Original Message-----
From: Taras Katkov
To: [email protected]
Sent: 12/1/99 2:57 PM
Subject: Re: (forte-users) Changing replication options in Fscript?
"setappcompcompiled", "setPARTrepcount" can be used in fscript during
application build.
I mean PERIOD!
Taras Katkov
f.e.
FindAppComp AppNAme_PartXX
SetAppCompCompiled MyNode 1
SetPartRepCount MyNode YY
SetPartArgs MyNode \"Whatever\"
SetPartThreadPkg MyNode DCE
commit
[email protected] wrote:
>
Yes through escript one can achieve changing the properties but onecannot
do it when one is partitioning the app where the router gets createdand
assigned ( which is fscript) and the single threadedness of thepartition
takes effect ( for loadbalancing ) except from the partitioningworkshop
(GUI) itself.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:39 PM
To: [email protected]; [email protected];
[email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
Yes you can do it, but you actually do it in EScript not FScript lookfor
the following types of command "assignappcomp", "unassignappcomp",
"setappcompcompiled", "setrepcount", "findagent", "findsubagent",
"findparent" etc.. So start with your EScript manual.
Happy scripting.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 1:36 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
no it is not. One can compiling properties but not replicationproperties
through Fscript.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:24 PM
To: [email protected]
Subject: (forte-users) Changing replication options in Fscript?
Before making a distribution, we modify replication options on some ofour
service objects from within the Partition Workshop (to get rid of the
router partition on some of our applications). Does anyone know ifit is
possible to do this in Fscript? Thanks for your help.
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]

You can set the the number of replicas through fscript BUT the service
object in that partition has to be marked for LOADBALANCE. I didn't find a
fscript command to do that (that was what mnasser was trying to tell you).
But you can get around it by exporting the plan that has the service object
and look for the string LoadBalance = FALSE, then change it to LoadBalance =
TRUE. Import back the plan and you should be fine.
Norocel Popa
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 8:28 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript? -
Tric k
There was one attribute of a service object you couldn't change in fscript..
I think it was whether the service was replicated at all or not (not the
same as setting rep count to 1!).
As Clint would say, "improvise.."
We exported the project containing the service object and snipped out the
part pertaining to the service object in to a little export file.
Then in an fscript script you can branch/checkout the service object and
import the snipped out export file to change the replicated yes/no flag.
Then do whatever other fscript commands make sense.. We tended to leave the
system baseline with the "true" replication flags and let developers run
this little script (only branching the services) to de-replicate all the
replicated services prior to trying to run from their workspace, etc.
Worked like a charm.
-Greg
-----Original Message-----
From: Taras Katkov
To: [email protected]
Sent: 12/1/99 2:57 PM
Subject: Re: (forte-users) Changing replication options in Fscript?
"setappcompcompiled", "setPARTrepcount" can be used in fscript during
application build.
I mean PERIOD!
Taras Katkov
f.e.
FindAppComp AppNAme_PartXX
SetAppCompCompiled MyNode 1
SetPartRepCount MyNode YY
SetPartArgs MyNode \"Whatever\"
SetPartThreadPkg MyNode DCE
commit
[email protected] wrote:
>
Yes through escript one can achieve changing the properties but onecannot
do it when one is partitioning the app where the router gets createdand
assigned ( which is fscript) and the single threadedness of thepartition
takes effect ( for loadbalancing ) except from the partitioningworkshop
(GUI) itself.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:39 PM
To: [email protected]; [email protected];
[email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
Yes you can do it, but you actually do it in EScript not FScript lookfor
the following types of command "assignappcomp", "unassignappcomp",
"setappcompcompiled", "setrepcount", "findagent", "findsubagent",
"findparent" etc.. So start with your EScript manual.
Happy scripting.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 1:36 PM
To: [email protected]; [email protected]
Subject: RE: (forte-users) Changing replication options in Fscript?
no it is not. One can compiling properties but not replicationproperties
through Fscript.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, December 01, 1999 3:24 PM
To: [email protected]
Subject: (forte-users) Changing replication options in Fscript?
Before making a distribution, we modify replication options on some ofour
service objects from within the Partition Workshop (to get rid of the
router partition on some of our applications). Does anyone know ifit is
possible to do this in Fscript? Thanks for your help.
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

How can I change view options for ALL playlists?

How can I change view options for ALL playlists? With one single click or trick?
I have a lot playlists and don't want to change every single one of them separatly.
Thanks for your help. (I use Windows 7)

There's no FAST way I know of, which is what I think you mean.
Only the painful SLOW way of one-by-one.
You could make a new playlist from the main library after you've set the columns up as you like.
Go to an existing playlist that doesn't have the columns you want, and select all.
RIght-click > Add to Playlist and send them to the new playlist.
That's still one-by-one and only works with static playlists, not smart ones.

Disable "Change Password" option in Comms Express

I need to disable/remove the Change Password option in Communications Express. I'm using patch level 122793-30. How do I do this? Are there any instructions out there for this? I see them for Convergence....which I have installed also but I have users who still use Comms Express.
Thanks in advance!

Found it myself.
Edit /var/opt/sun/comms/ce/uwc/common/UserPreferencesSettings.jsp and change:
<div class="Tab3"><a href="<%= getContextURI(request) %>/base/UserPreferencesPassword" class="TabLblNormal" title="<ja
to:getModelFieldValue escape="false" modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSessio
n="true" name="uwc-common-options-tooltip-ChangePassword" defaultValue="Change Password"/>"><jato:getModelFieldValue escape="false"
modelClass="com.sun.uwc.common.model.UWCResourceBundleModel" modelName="i18nModel" lookInSession="true" name="uwc-common-options-Cha
ngePassword" defaultValue="Change Password"/></a></div>to:
<div class="Tab3"> </div>

IPad mirror shows up in 4:3 aspect

why doesn't apple tv show ipad mirror in widescreen and only in 4:3 aspect ratio - the advertisements clearly show photos in full screen - am I missing something or is this misleading advertising

Hi,
It is not false advertising but it is app dependend though; i.e. an app can take advantage of your whole 16:9 real estate like Real Racing or Apple Video app while others app may not have been designed for that. Most video playback apps will be full screen.
Mirroring your iPad app pages will be in 4:3 as it is the aspect ratio of the iPad. It wouldn't make sense to present wider pages as it wouldn't match what you are seing on your iPad.

A guest at our home used his ipad and changed the network name. How do I change it back to the apple network

A guest at our house was using his ipad and changed the apple netwrok name to another and put a password on it. How do I eliminate this netwrok and get back to the Apple Network?

Please check out the following AirPort User Tip for details on resetting the password. Once that is done, you can access the base station to change its Wireless Name (or SSID) back to what you prefer. To discourage other "guests" from changing the AirPort settings, you should also change the default base station Administrator password.

IPad 2 Mirroring: Change Deminsion Options.

Similar Messages

Maybe you are looking for