Ipad 2 not communicating with my HP3050a printer after changing router?

Hi, hope someone can help.  Recently changed broadband provider and now using a different router/network.  I've set up my printer using the USB cable to a windows laptop and then enabled WiFi as directed.  Now the laptop is working fine but my Ipad seems to see the printer on the network but can't communicate with it even though it is designated a shared device.  Does anyone have any ideas? Many thanks

My guess is a firewall in the router.   You will need admin access to the router (contact the provider).  If a firewall is present, turn it off and test the printer.  If it works, turn the firewall back on but weaken it a tad and test the printer again.  Repeat as required.

Similar Messages

  • B210a will not print after changing router\modem

    b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

    Good morning,
    Please use the second section of the following article to fix:
        http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My ipad is not syncing with my HP printer. The printer is a C4580 and I have an Ipad2 that I just recently purchased

    Any ideas of where to start to fix this?

    Here's an old post (from doing a search)
    The C4580 is not an AirPrint printer. HP has a list of their AirPrint printers here:
    http://www.hp.com/go/airprint
    and Apple has their list here:
    http://www.apple.com/ipad/features/airprint.html
    Your one choice is to connect your printer to your computer and then get an app for the computer that routes AirPrint jobs to the printer. On a mac, buy Printopia. Don't know about a PC.

  • My computer is not communicating with my wireless printer

    My hp computer is not recognizing my wireless HP 8600 printer. The printer has worked fine for the past year. The message says that the printer is off line and to check the cable or network. The printer is working fine because I can print from the two other computer that are connected to the wireless network. I went through the trouble shooting procedures for the network, but the network is fine. Anyone have this problem with the software on their computer?

    Important

  • Leopard not working with HP Scanner/Printer after upgrading from Tiger?

    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor

    van D wrote:
    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor
    Unfortunately HP is slow in updating software for Leopard compatibility. If you search this forum you will find some solutions for your problem.
    First, check HP's website for the latest software.
    I believe that uninstalling your current HP software and either reinstalling it or installing more recent software usually solves the problem.
    There was also an issue with Canon scanners.
    Here are a few links to look at:
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01234231&cc=us&dlc=e n&lc=en&jumpid=regR1002USEN
    http://forums.macworld.com/message/605773
    http://forums.macosxhints.com/showthread.php?t=80579
    I personally gave up with HP a while ago, while still using PCs. I switched to Epson and both my Epson printers and my Epson scanner work fine with all my computers, PC and Mac. That was my solution.

  • Messenger not working with non-apple cells after changing password iOS password

    I changed my password because apple decided to not accept my password simply trying to download an app and after i got home, i lost capabitilty of texting to non-iphones through the messenger app.
    It absolutely lost the capability i had before simply by changing my password.
    I tried relogging in in all my devices iphone, ipad, and macbook pro and though i can text fine on my iphone, i no longer can text outside of the apple world to android cell phone users.
    How do i regain connectivity to the rest of the world instead of just apples?!
    Thank you in advance.

    Hi,
    If the iCloud ID is the same one you use in Messages for the iMessages account then you need to change the password there and in all other devices.
    As you tend to be unable to change all devices at the same time the link between the iPhone number and th Apple ID tends to get lost which then means any Text Forwarding linking also gets broken.
    On the Mac Version Untick the Enable box for the iMessages account.
    On the iPhone remove the Apple ID and place the iPhone in Airplane mode for a good two minutes.
    Go back to the Messages settings after this and make sure the iPhone number Verifies.
    When this is done turn th Enable box back On on the Mac version.
    Untick the iPhone number as a Receive "ID".  This may make the Start Conversation From drop down disappear.
    Send an iMessages from the iPhone (it can only use it's number) to the Apple ID (Effectively the Mac)
    Send a reply.
    This will check that the iPhone  (Number) can Send and Receive.
    Now on the iPhone Add back the Apple ID to re-link them.
    This should cause the Pop up to appear on the Mac.
    If it does not Restart the Mac version.
    This should Enable the unticked iPhone number in the Receive At list and make the Start Form drop down appear.
    Now Reset the Text Forwarding.
    9:42 pm      Monday; March 23, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Can't find wireless printer after changing router

    I have recently changed my router to a Virgin media superhub. This has obviously changed my network details. I had 2 wireless printers running on my old network. ?I have managed to get one working as it has a menu screen on it and it was just a matter of searching for the new network. My second printer, a HP 1102w does not have a menu just buttons. I cannot get my Mac to see it in any of the preference options

    maybe the features of the usb port is controlled by the routers setup page most routers have some ip address you type into a browser and login to the router to set them up try that
    because some routers have usb for external hd some for printers some only for firmware updates (like the Apple TV (which of cause are not routers but have usb connector for the sole purpose of upgrading a crashed firmware))

  • Airport does not communicate with my wireless printer

    Hello all,
    I can really use some help here.  We have a Canon wireless printer and an Airport Extreme.  The printer was working wirelessly until recently and I called Canon for tech support.  I was on the phone with Canon for an hour.  We have trouble-shot the printer every which way.  They are now telling me that the airport is not communicating with my wireless printer.  Is there someone that can help me check this?

    Earlier G5s had an external T antenna I believe, besides the antenna wire inside...
    http://support.apple.com/kb/TA27092
    http://www.macproonline.com/Airport-Extreme-antenna-external-G5-Tower/PowerMac-G 5/PowerMac-G5-Parts/G5-June-2004-Dual-20-Dual-18-PowerMacs-Replacement-Parts-p56 36587.html
    One of these may be a better/cheaper option...
    http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
    Message was edited by: BDAqua

  • My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening.  My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

    my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening.  My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud.  Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
    Most recent version of mountain lion updated over a month ago.  New iPad in use for over a month.
    thanks

    The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password.  Typical when today I'm waiting some important emails!

  • My iPad is no longer communicating with my wireless printer since last two upgrades!

    My iPad is no longer communicating with my wireless printer since last two upgrades!

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • My  MacBook is not communicating with my desk top to enable printing from my MacBook. I need to find out how to make that happen. I have a static IP address on my desktop but don't know what to do on the Mac Book.

    My MacBook is not connecting to the host computer for the printer. The host computer has a static IP address which is different from the IP address that the laptop is looking for. How do I change the laptop so that it looks for the host computer's correct IP? The laptop is connected to the router. I know this because I can get on the internet with the laptop.

    The host computer is Dell and the operating system is Windows 7.  The printer is an Epson, and it is wired to the host computer with a USB cable. It does have host printing turned on.
    The three have been working harmoniously for a long time.  The router had to be reset; and after that, the MacBook documents would no longer print.
    We created a new static IP address on the Dell but the MacBook is not recognizing it.  We have researched the internet trying to figure out how to make the MacBook locate and recognize the correct IP address from the Dell so they can communicate with each other.  The laptop is not communicating with the host computer because is is looking for the wrong IP.  The host IP is 192.168.1.245 and the laptop is looking for 192.168.15.237.
    I hope everything is clear.  The person who originally set it up is no longer available to help me.  Thank you for any help you may give me.

  • After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad

    After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
    What should I do?

    Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

  • Computer not communicating with printer

    This morning my HP Pavallion downloaded some new updates and installed.  After that I consistently get messages of "No communications with printer".  It will not communicate with either my printer or pdf writer printer.
    I have rebooted computer 2-3 times, restarted printer 2-3 times and still have the issue. 
    In an earlier note I noticed a recommendation of going back to the original computer program before the updates.  I would I do that?
    Any recommendations for a fix?
    Glen

    Hey @papamkoch  and @glendodom ,
    Welcome to the HP Forums!
    If you're looking to do a system restore to before the issue started (which I agree is a great idea) you will want to check out this document: 
    System Restore - Windows 7
    How to refresh, reset, or restore your PC - Windows 8
    These documents cover the steps to access the restore. If a restore doesn't work you can also try a recovery which will put the unit back to it's original factory condition.
    Let me know if the restore works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Computer not communicating with printer(s) scanner

    I recently hooked up an Officejet  J6480 wireless printer. I also have a J5780 hooked up via USB. After hours, and I mean hours,  of being on-line with Tech Support through Chat and uninstalling and reinstalling, several times, and trying numerous things, neither printer has communication with the computer for scanning. The J6480 will scan if you go through Paint so it is functioning. The J5780 I haven't tested. I have downloaded drivers and every other thing that was suggested and the computer is not communicating with the printer for scanning. I have a Dell computer Inspiron 530S and am running Windows Vista (32)  May I also say, that I disable the Firewall & Virus programs when downloading, etc. so it doesn't interfer. I have tried everything but dynamite to get the scanner to respond. I've downloaded the Patch suggested in the drivers listings and everything. Im beside myself because the J5780 scanned fine until I installed the J6480. Now the window on the printer says there are no scan settings available in the window on the printer. Chat Techs, I think, are beside themselves too. I uninstalled the J5780, installed the J6480 and then went into 'Add a Printer'. Everything went fine except the scanner. I get a message from Solution Center saying there is no communication between the computer and the scanner. I think something is missing here. If anyone knows a solution I would be more than grateful. HELP!!!!

    Did you do an L3 uninstall of all HP software and start from scratch?  The L3 uninstaller should be on the install CD's for each printer.  You may have to do a search of the CD to find it.
    Tell me what router, ISP and encryption type you are using?  Also, what kind of security software are you using?
    Have you done a WIndows Update and updated your security system?  Do that between the L3 uninstall and the re-install.
    There is a lot going on here.  I'll hang in there with you...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Imessage on my computer not communicating with my phone.

    Imessage on my computer not communicating with my phone. In my computer settings my phone number is no longer an option, just my email. How do I get it back?

    HI,
    I had this.
    On checking the iPhone the iPhone Number was not ticked and the whole option to change it was greyed out.
    I removed the Apple ID and waited to see if th Number got ticked (Settings > Messages > Send and Receive).
    It did not.
    I put the iPhone in Airplane Mode
    After a few minutes I "restarted" the iPhone by turning off Airplane Mode
    This time the Number was ticked.
    I Added the Apple ID and then restarted Messages on the Mac.
    I soon got the pop message about the iPhone using it's Number and the Apple ID and Accepted.
    8:45 PM      Wednesday; March 13, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Error while trying to synchronize Audio and MIDI.  Sample Rate 48000 recognized. Check conflict between GarageBand and external device. How do I do this?

    I've had a small keyboard - M-Audio Ozone - hooked up to my Mac Mini through a USB and it has worked well through Garage Band until now. It tells me there is a conflict there is no sound at all coming from the keyboard. What can I do to correct this

  • Don't know the password

    My query is about the password of the Blackberry phone. I know the PIN-code of the Blackberry but I don't know the code. I desperately want to unluck the phone, in order to see what kind of data I still have on the phone (possibly some of my own). Pl

  • Downloading: "Open With" saves file to disk

    For most file types, my setting under Applications is "Always ask." In the selection window ("You have chosen to open..."), selecting the "Open with" button does open the file in the default program, but it also saves the file to disk. I don't want t

  • Elements 11 - new install Faulting module

    Hi, I have recently purchased 2 licenses for my school of Elements 11 but they won't start. Looking at the other thread relating to the event log below it talks about the location of the start menu being wrong and pointing to a MS fix but I have trie

  • Cannot open raw files in CS3

    I went through the steps of downlaoding the plugin and replacing it, but I still cannot open the files. Any other suggestions? I am trying to open a Canon CR2 file.