Ipad 2 not connecting to any wi-fi

So, I've had my ipad 2 since early 2013 and early this year, it stopped connecting to ANY wifi, not just the one at home. I took it to the Apple store only to be told that it would cost some ridiculous amount to fix it so I would be better off getting a new one. After that, I just kinda put it aside but now, I need it. I've tried everything; reset the network settings, restore and update (8.1) the Ipad, reset my router, even had the wifi antenna changed and still, it wont connect. It just keeps telling me "Unable to connect..."
I have no idea what else to do and i'm about 2 seconds away from throwing it against the wall (bad temper). It's the wifi version so without connecting to anything, it's just a $350 piece of crap

your iPad isn't worth bothering with. the iPad 2 is very outdated. i know you might not understand but what Apple does is they keep around older models as a cheaper option. I know you just got it but the device itself was released over 3 years ago. In terms of mobile devices, that is extremely old. i would go and get the iPad Air 2

Similar Messages

Why is my iPad not connecting to any computer??

When I connect my iPhone and ipod to the computers, they all recognise but my Ipad doesn't.. It's the first iPad with the lightening connector, I think the 4th gen 16gb with just wifi.. Please help

Apple seems to be having issues. Just wait it out and come back in a bit. If the issue is indeed on their end, nothing you can do with your device can fix it.

Can I use imessage with an apple ID which is not connected to any iphone / iPad ?

Hay dude. I have just upgraded to Mavericks in my macbookpro. I have used an apple ID to log in to my imessage. That Apple ID is not connected to any iphone/iPad. Can I still use that apple ID to use my imessage feature and send free message to my friends for free? If yes, Then how ?
Your help will be highly appreciated. Thank you.
Waiting to hear from you.

Thanks Dude
I have done the set up already but still unable to send message. I just can send message to myself. So I am asking here.
Can I still use that apple ID to use my imessage feature and send free message to my friends for free?

HT1438 ipad will not connect to any wi-fi servers?

my ipad will not connect to any wi-fi servers, I try adding and it does not recognize any wi-fi's

Check in settings to be sure restrictions are not turned on.
If that isn't it, have you tried to find/connect to a wifi in a public area, like a mall or cafe?

IPad will not connect to any other wifi network besides iPhone hotspot.

I have 3 iPads and until recently they all worked flawlessly using a mediocre wifi signal. One of them now will only work with my iPhone hotspot and will not connect to any other wifi network. I have rest it removed the cover and it still does not work. Please advise.
Thanks

Try this Method:
Go to Settings > General > Reset > Reset Network Settings (NO DATA WILL BE DELETED)
Reconfirm it again when the notification pops up and wait for the phone to reboot itself

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

ipad not connected to computer. erreo number (0xE8000084)

Hello Mohamed Abdo,
It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Start with these steps, and there are additional steps in the article if you need them:
1. Restart your computer.
2. Install the latest version of iTunes.
3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
Windows XP Service Pack 3
Windows Vista
Windows 7
Windows 8
4. Download and install any available software updates from Microsoft.
5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
8. Connect your device to a different USB port on your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

Wifi says unable to connect, will not connect to any connections.

Wifi says unable to connect, will not connect to any connections. I cannot connect to any WiFi. Using iOS 6.0.1

The links provided work for iPod and iPhone!
Products Affected
iPad, iPhone, iPod touch, iTunes
You'll have to visit an Apple Store next to your place to get it looked at or contact Apple to get it serviced.
Apple - Support - iPod - Repair pricing

Ipad not connecting in itunes

Ipad not connecting to itunes, but is recognised thru Win Explorer while connect to computer? Any advice to resolve?

Thanks for response. I have uninstalled itunes and re-downloaded (13/5/2011). I did have the latest version previously.
New itunes loaded. I tried connecting ipad once itunes is open, but still itunes is not recognising IPAD. Ipad is connected to computer - visible still through Win Explorer.
It is noted once IPAD is connected "Autoplay" via Windows 7 opens up. Itunes is not listed as a default to open files.
I have tried all ports on computer, and new cables - no luck. I welcome some further feedback. The itunes connecting to iPAD about 10 days ago when I last connected.

How can i find the capacity of my iphone 4s. whether it is 8G or 16G. I do not want to switch it on as it is not connected to any network at the moment

how can i find the capacity of my iphone 4s. whether it is 8G or 16G. I do not want to switch it on as it is not connected to any network at the moment

If you have the serial number of the phone, put it in here
To find the serial number without switching it on, read this article:
Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support

HT201263 forgot passcode on ipad and i cannot restore because it says ipad not connected to net

forgot passcode on ipad and i cannot restore because it says ipad not connected to net

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

My phone is not connecting to any wifi's what do I do?

my phone is not connecting to any wifi's what do I do?

http://support.apple.com/kb/TS1398

Could not connect to any JRun/ColdFusion servers on host localhost

I am a new CF admin and I am trying to upgrade my Apache. I am following the instructions in http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd9 .html but am getting an error. Could not connect to any JRun/ColdFusion servers on host localhost
I am running CF8 on Linux Suse and trying to upgrade apache to version 2.2.22. I am running apache on server-1 and ColdFuson on server-2.
I tried running the following on server1:
/data/jrun4/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
but got the error.
So then I tried installing apache on server-2 and running:
/data/cf8/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
I got the exact same error.
CF is definately up and running.
What am I doing wrong?

Hi Kiran,
Yes, Coldfusion is running and I have root access. You need
to be root just to get the installer to run and to execute the
Apache connector to produce the error I pasted into my message. My
firewall is disabled, as is SELinux. I'm not sure how to "Write
small program to check socket creation..."
I'm reading through some of the tortured things Steven Erat
had to do to get CF7 running on FC6 here:
http://www.talkingtree.com/blog/index.cfm/2006/12/6/Running-ColdFusion-MX-7-on-Fedora-Core -6-Linux
I suspect I'm running into one of these snags. I was just
wondering if anyone knew if RHEL5 was officially supported yet, or
more concisely, Apache 2.2?

Firefox will not connect to any website but other browsers can

I installed firefox on my new advent laptop running windows 7 but it will not connect to any websites. I can connect using chrome or ie no problem but i always preferred firefox as a browser, i have tried changing settings and turning off my firewall but still having no luck

Okay, here is my answer to this problem. At least it fixed my problem and firefox now works fine.
Prior to this problem I was running zonealarm (free firewall) everything worked fine until I removed zonealarm free and installed Comodo free firewall. That is when the trouble started. firefox failed and IE kept working. I tried everything posted here nothing worked for me.
I resorted to "REGEDIT" and removed everything in my registry that regedit would allow that had the name of "zonealarm" on it. Didn't even have to reboot my system, firefox worked first thing. Everything else is fine also.
[note: this is not a slam against Lavasoft's ZoneAlarm firewall. It is just that UNINSTALL programs do not always do a thorough job of removing parts of programs in your systems and registry cleaner programs do not pick them up either.]
USE CARE, "REGEDIT" IS A POWERFUL AND DANGEROUS TOOL TO USE ESPECIALLY IF YOU ARE NOT A SOMEWHAT ADVANCED USER. USE CARE WITH "REGEDIT!"
Good luck.
Lane

Firefox will not connect to any website following upgrade. Anti-malware is not blocking AFAIK

Firefox will not connect to any website *at all* since upgrading to latest version. No mention of Firefox anywhere in firewall- and anti-malware-related services (Intego VirusBarrier X6 V10.6.13).
*** System Info Follows ***
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM11.0055.B08
SMC Version (system): 1.3f4
Serial Number (system): ***
Hardware UUID: ***
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: ***
User Name: ***
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No

Check your firewall settings. It could be blocking the new version.
* http://kb.mozillazine.org/Firewalls

Ipad 2 not connecting to any wi-fi

Similar Messages

Maybe you are looking for