IPad 2 not seeing any networks

Hi,
My iPad 2 recently stopped seeing any available networks.  At the time it happened, I was running iOS 7.  When I try to look for available networks, none come up.  When I search for my network by name, I get a message saying it could not find it.  I have two MacBook Airs, two iPhones, and an iPad mini that are all seeing my network (and a few of my neighbors' as well) and having no issues connecting.
My first step to try and fix this was to reset the network settings.  No dice.  Then I tried updating to iOS 8.1.1.  No dice again.  I've also backed up and reset the iPad to factory settings.  Still nothing. 
Has anyone else had a similar issue?  I'm worried it is a hardware issue and my WiFi might be fried.
Thanks for any insight.

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Similar Messages

  • Airport Not Seeing Any Networks

    *After waking the PowerBook from overnight Sleep mode this morning, my Airport isn't working. No reception of mine or any other WiFi networks in my building (there are typically 4 or 5 of my neighbors' wireless networks displayed when I check using Internet Connection). After numerous re-starts, forced re-starts, re-boots and Disk Utility passes, nothing. I re-set my Airport Express, nothing. I re-seated my internal Airport card and checked the antenna connector, still nothing. Do Airport cards eventually just quit working? Anyone here have any other ideas or suggestions? Thanks, Jd*
    Message was edited by: JD

    *Back from the Apple Store and a meeting with a very competent genius. The card works and I was able to access the Internet there. Returned home and I was very optimistic and ready to get back to normal. I restarted the computer and had the same problem, not seeing ANY WiFi networks, including my Airport Express or any of my neighbors' networks. I took the computer to another building in my complex and was able to join onto one of the WiFi networks there, so that tells me that there may be outside influences at work here. I have just re-installed OSX to make a clean start to see if that would make a difference, again nothing. My next move is to check with one of my neighbors to see if they are having the same problem. Otherwise, it's very strange and I'm stumped. I'm open to any other ideas and suggestions, if anyone here has any. Thanks, JD*

  • My iPad does not see any network and i cannot get to place to enter manually IP address etc.

    I have several apple products connected on home wi-fi network. On my ipad, it does not even see the network.  I would put IP etc in manually but I cannot get to that page to do it.  Where is it? 

    Settings>WiFi>Other. Enter your network name and password.
    Have you tried .... Settings>WiFi>Tap your network name>Tap the blue arrow on the right>Forget this network. Restart your iPad then go back to the WiFi settings and try again?

  • XP not seeing any network cards

    I have XP running through Bootcamp but am not able to see a network card. I do not seem to be able to find any drivers to use. Any suggestions?

    Stefan,
    thanks for your response......... not looking for excuses but.... I am new to this 'Mac World' and I did not think for one minute that the OSX DVD would have anything to do with MS Windows once it was up and running!!!!!!
    Unfortunately I'm away from my Leopard disk until tuesday but it sounds like my problem will be solved.....
    Thanks very much,
    Tim

  • G5 imac not seeing any networks

    Hi -
    I just installed an Airport Extreme card in my 20" 1.8 GHz PowerPC G5 and it's not seeing anything. Not my home Airport Express network and none of the other networks that abound on my block.
    The computer itself recognizes the card, it just has nothing to do at this point.
    Searching on old posts here, people have mentioned a Power G5 problem, but the info is kind of old and so far I haven't gotten the scoop yet on what might be wrong.

    ...Thinking that the antenna is not properly installed. Will try again...

  • Airport can not see any network

    Hi.
    I am struggling with airport on my macbook. There are many wifi newtorks around me, my iphone can see them all, but all of the sudden, for the second day my macbook cant see any of them. I already tried everything, however nothing works any ideas?

    Hi,
    try to repair your mac os x. Put in the mac os x dvd, and hold down the "c" key before you start your macbook.
    Utilities > Disk Utility. Repair Volume and after that repair permissions.
    Reply
    Greets

  • Airport Extreme card does not see any networks...help!

    I have a home network that is working fine - 2 linksys routers with WDS set up... it all works great - an Ibook g4 running 10.3 and has an Airport Extreme card connects flawlessly everyday. As does an old G4 powerbook with an old airport card.
    however, I have this dual g4 with 10.4.3 running, and a recently-installed airport extreme card.
    When I turn airport "on" it never sees our network. And it doesn't see my neighbors' networks, either, which are also always visible.
    I can, howevr, connect via ethernet to the router that is somewhat nearby. that networking is fine...I can get on wired, but not wirelessly.
    I've installed the 2005-1 update, and have run Software Update as well to see if there are any other patches/updates necesary. so as far as I can tell, I am up to date.
    system profiler says:
    Wireless Card Type: AirPort Extreme
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
    Current Wireless Network: wireless network not available
    and in the extensions section for the airport, it says:
    Version: 4.0.4
    Last Modified: 11/20/05 9:55 AM
    Get Info String: 4.0.4, Copyright © 2002 - 2005 Apple Computer, Inc., All Rights Reserved
    Location: /System/Library/Extensions/AppleAirPort2.kext
    kext Version: 404.2
    Load Address: 0x39738000
    Valid: Yes
    Authentic: Yes
    Dependencies: Satisfied
    Integrity: Correct
    I am at a loss. Is there anything else I can do before writing off the card as a bad card - or perhaps the logic board is faulty?
    I hope there is a simple solution to this. I appreciate your expert help.

    Go back and recheck the Airport Extreme card installation. Make sure you plugged the connector for the internal Airport antenna into its socket on the Airport Extreme card itself - and make sure the plug is fully seated into its socket (none of the metal sleave should be showing).

  • TS1398 my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

    my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

    If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • I am running Windows 7.  I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order).  I can not see any recent remarks regarding how to keep them from being loaded in date order.

    I am running Windows 7.  I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order).  I can not see any recent remarks regarding how to keep them from being loaded in date order

    By default the photos will be sorted by the date modified.
         iOS: Understanding photo sorting
    Edit (touch) them in the order you want them to be shown.

  • HT4236 I synced photos from my computer to ipad 2. I do not see any of the photos on the camera roll.

    I have itunes 11.0.2.26 version. I synced photos from my laptop to my ipad2. It correctly displays the size occupied on the itunes window on the laptop. But in my ipad I do not see any of the pictures. In the folder that I synced from on the laptop, the ipod photo cache folder got created and there are some folder in it.
    How can I view the photos in my ipad?

    Unsync them.
    See this -> http://support.apple.com/kb/HT4236

  • Satelite A30 does not see any other network devices in WLan

    I recently bought a Toshiba Wireless LAN Mini PCI Card, i've installed it and managed to get it to recognise my broadband but it does not see any other network devices. I was not supplied with any drivers or software to operate the card (I bought it from a proper dealer). Can you recommend downloads that would run this card?
    I have a Satelite A30 laptop 1gb ram 60GB HDD.
    Also large files sometimes stop transfering (hangs)when using my USB connection. The usb controller is using microsoft driver 5.1.2600.0 dated 1 june 2002.
    Is this a driver problem?

    Hi
    If the WLan card is properly installed so you have only not configured you settings.
    I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computers must be in the same domain or workgroup.
    I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.
    Hi
    If the WLan card is properly installed so you have only not configured you settings.
    I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computer must be in the same domain or workgroup.
    I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.

  • TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

    My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

    My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

  • After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

    After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

    Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

  • Wirelss drops out - can no longer see any networks

    Hi all, I have searched for other threads with similar problems but I could not find one exactly like mine.
    Recently I have had problems where I have been surfing on firefox, and then all of a sudden it has automatically switched to "Work Offline". I then check my airport status and it is not connected to my network. When I turn airport off, and then on again, it then cannot see any network at all. I have to restart my computer.
    Any ideas?

    ozdude wrote:
    Recently I have had problems where I have been surfing on firefox, and then all of a sudden it has automatically switched to "Work Offline". I then check my airport status and it is not connected to my network. When I turn airport off, and then on again, it then cannot see any network at all. I have to restart my computer.
    You might try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

Maybe you are looking for

  • Browserlab is not working for me, it wont complete the load even though i have high speed internet?

    Subject First time use of browser lab not working. Problem Description Ok, so, I'm working on a tutorial page on CS5.5 and I am at the stage of using browserlab to preview it online. I log in and enter my password then it opens my browser and I click

  • Dunning Letter No is always 1 even though Dunning Level is 2, 3 and so on

    Weird problem on SBO 2007A SP 1 PL5 Dunning Levels seem to be set appropriately: Dunning Letter 01 - 15 days Dunning Letter 02 - 35 days Dunning Letter 03 - 50 days Dunning Letter 04 - 70 days Dunning Terms are one letter per Business Partner with Ap

  • Error: report_attribute_t100_message & set_attribute_property Into table UI

    Hi Experts, I have twice error on Table UI Element into Web Dynpro Abap. When i use this method with lo_el from table row, don´t run. LOOP AT lt_tabla_reserva ASSIGNING e_property-read_only         value          = abap_true. Is there any other Sap C

  • Pop-ups - what about this?

    Is it possible to create a link in Presenter that opens a small HTML pop up in the middle of the page? (in other words each pop up is an HTML file already uploaded online) If so does anyone know how to do this? Regards, Neil

  • Seeking Archiving Script Help

    I have heard several requests now for the exact same issue I have been looking to have resolved and did a little poking around but really need help beyond this point. First my iBook only has a 20Gig drive and so I need to be considerate of how I use