Ipad 2 recently updated to 6.1.2 Cycles to sleep mode repeatedly. I

My Ipad 2 recently updated to 6.1.2 Cycles to sleep mode repeatedly. I had restored to 6.0.1 because of the same problem, which then cleared up with the restore process. It seems to have started after letting the battery run down, which after charging it would not report 100%.
After a successful restore, Itunes reported my IOS was out of date and I updated to 6.1.2, which was a mistake. Now it goes to standby mode after about 30 seconds and when I surf, the unit will lock up.
Any ideas on how I can correct this? I've tried most suggestions I've found on the internet. This unit has not had that much use. Not too impressed with this from a quality standpoint. I guess I could use another paper weight. Had I intended to use it alot, I would have purchased the insurance.

The problem has resurfaced. There appears to be an issue with the power management subsystem. Since my last post, the power capacity display was not being updated, reporting the same 75% during use regardless of whether it was plugged in or not.
I used the tablet over the weekend and as a result the power went down to 9%, which was finally reported after logging in. This was the first time that the power capacity display had been updated, though the unit was working. After charging it, the power capacity looks right, though it keeps shutting down. It almost looks like some sort of auto shutdown invokes due to the subsystem not being updated with the correct power data. I think the tablet is charging because after restoring/resyncing from two weeks ago, it ran fine on the battery.
Today I was informed that the power should not go below 30% -has anyone heard if this? If so,the moral of the story is not to let the power get low. Well, is there any insight on this or how to correct this or why the power capacity is not being updated. As the last restore sort of correcting the problem of its constantly shutting down, subsequent to the power capacity display was not being updated

Similar Messages

Adobe reader won't open on iPad after recent update

After most recent update, adobe reader won't open on my iPad. I have lots of docs that I need to get to. Please help.

This forum is probably the best you can do. We're now on the weekend, and Adobe engineers don't work 24/7. When they return on Monday and see the reports, they'll work to fix it. The update will need to be submitted to Apple and then approved for an update.
Note that there are other apps on the App Store which can read PDFs.

Ipad 2 recently update to 8.1.2, now won't connect to server. All other computers in house connect fine. Any ideas?

Our Ipad 2 suddenly won't connect to our wifi. Two pc's and an adroid are connecting fine. Recently updated to ios 8.1.2. Have turned it off and on, have turned off network in "settings," and back on. What will "reset network settings" do? It says it will return to factory defaults, so does that mean only that the current wifi router network information will be deleted, but nothing else?
Any other ideas?

Try restarting your WiFi router by removing power for 30 seconds
On your iPad use Settings > General > Reset > Reset network settings - This causes the iPad to forget all WiFi networks. No other settings are affected.

OS Combo Update 10.5.7 has broke my sleep mode---HELP!

Hey,
I am really upset with Apple right now for releasing a faulty OS update that instead of improving my MAC, it has made it a nightmare. After I installed the last OS update (i.e. OS Combo [of trouble] Update 10.5.7). I have not been able to put my computer in sleep mode because it just keeps on turning back on. Without sleep mode I have to shutdown my computer or leave it on all day just so I can use it. I went on other MAC forums and lots of people are having the same problem with no solution.
If anyone knows how to solve this problem (so far I tried the refiguring the ethernet connection--didn't work) please let me know because I am really hating Apple computers right now, and I have a Vista operated PC!

I would be hesitating to blame the 10.5.7 update as being the cause the problem even though it is co-incidental. I would suggest that something is amiss in your settings or something has gotten corrupted. It's just a matter of narrowing it down and finding where the problem is. Do you have anything connected to your Macbook, other than a power cord, that could be triggering it to wake up? Is it possible that some external device is the cause?
Chris
Message was edited by: 2point5

Not syncing ipad after recent update-windows vista mobile and yahoo go sync

I recently purchased the ipad, updated itunes to the latest version and installed a bunch of apps. Everything seems to work well except, I cannot sync contacts, calendars, notes, and bookmarks. When I attempt to sync these my computer shows an error message of "mobile sync has stopped working". Then I get an error message that "Yahoo go sync client has stopped working". I have not used MobileMe. I think that this will be a common problem with this update, and apple will need to submit a corrected version to fix this problem. There have been other posts on this problem. Any suggestions on how to fix this problem?

I have EXACTLY the same problem. Can anybody help please?!

My Ipad was 89% charged an hour ago. put it in sleep mode and came back and now there is nothing...I plugged it into my computer and it is not showing up as a device in iTunes...there is absolutely nothing...and it was just fine...hmmm...any ideas?

My Ipad dropped dead. I had 89% charge left. Came back an hour later after putting it to sleep and it is totally black...no response to plugging it in...usually there is a sound...when I plugged into my apple computer it doesnot even show up on itunes..no acknowlegement of it...no nothing...Ipad 3..new this last spring...I had an ipad 2 before this...so this is not my first rodeo as they say.Was wondering if anyone else has had this problem? Or is it just dead?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My iPad 2 mini froze when I tried to place in sleep mode.

I have a gray screen & I can see it light up when I tap the sleep/home buttons, but I can't see the buttons. Sometimes unlock screen/reminders flicker, but not long enough to use them. I tried tapping their location, but no response. Same with forced shutdown. The iPad screen lights up, but never responds to the command. It just goes back to sleep.

Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Is it safe to do Software Update? and to put it on Sleep mode?

I'm coming over from a Pro Tools background, and with PT they would say not to do software updates as it can cause bugs with Pro Tools, is this an issue with Logic? and also Digidesign would say not to manually put your computer to sleep while running pro tools cuz it'll cause glitches or errors.
i would think cuz its all comin from the same house (Apple) that everything should be all good, no worries. but i still have to ask.
thanks

Don't assume that because it's all apple there will be no problems! A quick surf around this forum on the subject of software updates will be enough to assure you of that!
And I would never put the system to sleep whilst actually running a session - I have had problems with this in the past (disk too slow errors etc.) I have my energy saver settings set to "never" except for the screen saver...
Check with other users on this forum is my advice before installing any update at all - do a search first and if you can't find answers then ask, but just make sure you include as many details about your machine, setup, OS version etc. as possible.
If your system is working fine I wouldn't bother with the upgrades personally.
HTH

HT4623 I have a 1st generation iPad &recently updated to iOS 5.1, but I can't find my AppStore app icon! Help!

I have a 1st generation iPad and recently updated to iOS 5. However, I can't find my AppStore app icon now. Like it's disappeared!
How do I get the icon back?

Do your have Restrictions turned on? Settings>General.
If that's not it, scroll to the left until you get to the search page. enter "App Store", does this find the app? If so, then the icon is lost on some later page or is in some folder.

Ntlmaps not running after recent update. (FIXED)

FIXED - Ended up re-writing MAKEPKG, depends, modified patches file and new MD5 sums to build on Python 2.7. Instructions below for anyone who needs them. Cheers - Arkay.
Hi All,
I use ntlmaps in conjunction with corkscrew to create ssh tunnels out through my work proxy to my home network. It's always worked perfectly fine until a recent pacman -Syu.
From looking into it as much as I can it appears that Python 3 has been pulled into the mix where ntlmaps appears only to work with python 2.
In the original effort to fix it I updated to the latest MAKEPKG in the AUR which also doesn't seem to work with either version of Python.
I've attempted to debug the issues in Python though my knowledge of the language is sorely lacking.
The initial error I get is:
File "/usr/bin/ntlmaps", line 31
print 'NTLM authorization Proxy Server v%s' % conf['GENERAL']['VERSION']
^
SyntaxError: invalid syntax
But the code block above appears ok to me. On further investigation (running it line by line in interactive mode), it appeared to be the includes causing the issue at which point I found dos line endings on all the code in the site-python ntlmaps code. After removing all of them and converting back to unix eol's (didn't seem to really make a difference), I still get the same syntax errors. Further looking finds includes to libraries which possibly no longer exist or are depreciated in python 3. "threads" seems to be the main offender, according to the doco it is depreciated but should still work (tm).
I'm pretty much at a loss as to what to do next. I've tried swapping to cntlm but for some reason our proxy won't allow the connections through the way ntlmaps does.
I also just tried to re-install it with aurget. The makepkg worked but the install script failed with:
Byte compiling python modules...
error: command failed to execute correctly
Looking into that now too...
Any help would be much appreciated. Perhaps someone else can attempt to install and run it on their system.
Cheers,
Arkay.
P.S. My system is i686, recently updated.
P.P.S. Apologies to the mods. This should most likely be in the PKGBUILD forms... Please move and remove this P.P.S
Last edited by arkay (2010-10-26 01:00:09)

Ok. For some reason I haven't (yet) been able to get the PKGBUILD working with python 3.
I have however updated everything to work as expected with python 2.7 (specifically ntlmaps-0.9.9.0.1 under python2 2.7-2).
Here's the relevant bits for anyone who would like to build against 2.7 instead (if you have problems with 3).
Filename: PKGBUILD
# Contributor: Graziano <[email protected]>
# Maintainer: John Gerritse <[email protected]>
pkgname=ntlmaps
pkgver=0.9.9.0.1
pkgrel=5
pkgdesc="'NTLM Authorization Proxy Server' (APS) is a proxy software that allows you to authenticate via an MS Proxy Server using the proprietary NTLM protocol."
url="http://ntlmaps.sourceforge.net/"
license="GPL"
arch=('i686' 'x86_64')
depends=('python2')
backup=('etc/conf.d/ntlmaps')
install=$pkgname.install
source=(http://downloads.sourceforge.net/sourceforge/$pkgname/${pkgname}-${pkgver}.tar.gz patches ntlmaps.install ntlmaps.rc)
md5sums=('7ee0a00d5446f39ebbe5f0f90465986e'
'0ba42ac958b124b8e635c1524b26138e'
'a78770387e22c14a37bfdaee25c6594a'
'602132fda99e27efdd636a946e034d6b')
build() {
PYTHONVER=`python2 -c 'import sys;print(sys.version[0:3])'`
cd $srcdir/$pkgname-$pkgver/
patch -Np1 -i ../patches
install -D -m 600 server.cfg $pkgdir/etc/conf.d/$pkgname
PYDEST_SITE=$pkgdir/usr/lib/python$PYTHONVER/site-packages
mkdir -p $PYDEST_SITE/$pkgname
cp -a lib/* $PYDEST_SITE/$pkgname
install -m 644 __init__.py $PYDEST_SITE/$pkgname/__init__.py
install -D -m 755 main.py $pkgdir/usr/bin/$pkgname
install -D -m 755 ../ntlmaps.rc $pkgdir/etc/rc.d/ntlmaps
echo $pkgname > $PYDEST_SITE/$pkgname.pth
echo "echo $pkgname > $PYDEST_SITE/$pkgname.pth"
Filename: ntlmaps.install
# This is a default template for a post-install scriptlet. You can
# remove any functions you don't need (and this header).
# arg 1: the new package version
pre_install() {
/bin/true
# arg 1: the new package version
post_install() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the new package version
# arg 2: the old package version
pre_upgrade() {
/bin/true
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the old package version
pre_remove() {
/bin/true
# arg 1: the old package version
post_remove() {
/bin/true
op=$1
shift
$op $*
Filename: ntlmaps.rc
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
case "$1" in
start)
PID=`pidof -o %PPID /usr/bin/ntlmaps`
stat_busy "Starting ntlmaps"
if [ -z "$PID" ]; then
/usr/bin/ntlmaps > /var/log/ntlmaps.log 2>&1 &
fi
if [ ! -z "$PID" -o $? -gt 0 ]; then
stat_fail
else
add_daemon ntlmaps
stat_done
fi
stop)
PID=`pidof -o %PPID /usr/bin/python2 /usr/bin/ntlmaps`
stat_busy "Stopping ntlmaps"
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon ntlmaps
stat_done
fi
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
Filename: patches
diff -Naur ntlmaps-0.9.9.0.1/__init__.py ntlmaps-0.9.9.0.1_new//__init__.py
--- ntlmaps-0.9.9.0.1/__init__.py 2005-06-10 13:49:35.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//__init__.py 2010-10-25 12:49:03.820614080 +1100
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/python2
# This file is Copyright 2004 Darryl A. Dixon <[email protected]>
# and is part of 'NTLM Authorization Proxy Server',
@@ -20,10 +20,10 @@
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import os, sys
+#import os, sys
-ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
-ntlmaps_libdir = ntlmaps_dir + '/lib'
-sys.path.append(ntlmaps_libdir)
+#ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
+#ntlmaps_libdir = ntlmaps_dir + '/lib'
+#sys.path.append(ntlmaps_libdir)
-del os, sys
+#del os, sys
diff -Naur ntlmaps-0.9.9.0.1/lib/config.py ntlmaps-0.9.9.0.1_new//lib/config.py
--- ntlmaps-0.9.9.0.1/lib/config.py 2005-06-10 13:46:43.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//lib/config.py 2010-10-25 12:51:35.847799575 +1100
@@ -52,7 +52,7 @@
the config file. Otherwise the function falls back to
'server.cfg' in the current directory. """
- configFileName = configFileDir+'server.cfg'
+ configFileName = configFileDir+'ntlmaps'
optionsList, notUsedArguments = getopt.getopt(argv[1:], 'c:')
diff -Naur ntlmaps-0.9.9.0.1/main.py ntlmaps-0.9.9.0.1_new//main.py
--- ntlmaps-0.9.9.0.1/main.py 2006-01-27 12:35:00.000000000 +1100
+++ ntlmaps-0.9.9.0.1_new//main.py 2010-10-25 12:58:02.445983916 +1100
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python2
# This file is part of 'NTLM Authorization Proxy Server'
# Copyright 2001 Dmitry A. Rozmanov <[email protected]>
@@ -18,17 +18,16 @@
# Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import __init__
import sys
-import server, config, config_affairs
+from ntlmaps import server, config, config_affairs
# config affairs
# look for default config name in lib/config.py
-conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, __init__.ntlmaps_dir+'/'))
+conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, '/etc/conf.d/'))
conf['GENERAL']['VERSION'] = '0.9.9.0.1'
Save each of the code blocks (cut/paste into an editor) with the filenames given into a directory. Update/check the md5sums in the PKGBUILD for each (dunno how to upload files into a thread so you'll have to check the sums match after pasting/saving and I don't yet have AUR access). Then run makepkg. You should end up with a working ntlmaps for python2.7.
Cheers,
Arkay.
Last edited by arkay (2010-10-26 03:40:20)

10.5.2 update and Leopard Graphics update = no sleep mode

All, After updating my MacBook Pro to 10.5.2 and the Leopard Graphics update, my computer will not longer enter sleep mode after a specified time. I can manually set the computer to sleep mode, but it will not automatically go to sleep mode. I have tried resetting the System Management Control Center VIA http://docs.info.apple.com/article.html?artnum=303319 and everything else in that doc.
Any suggestions?
TIA Jon

Call AppleCare and see if they can help.
Regular trouble shooting
1) Create a new account, name it test or something
2) log into that account to see if the behavior changes
3) If it does, then there is some problem in your own account.
4) If it doesn't, restart.
5) If the behavior still doesn't change, there is some system configuration error
In this case
6) Open Disk Utility. Verify your disk, then repair permissions (not likely to fix the problem but will at least eliminate that possibilty)
7) Get a copy of Leopard Cache Cleaner and do a MODERATE cache cleaning
8) Restart
If still not fixed, reset PRAM and the SMU. Look on the Apple web site for instructions for your particular computer.
If still not different, do an Archive and Install. However go to the Apple web site and download the 10.5.2 Combo updater first. After you Archive and Install from either the disk that came with your computer (assuming that it is Leopard) or the retail Leopard installer. Then run the combo updater. Then run Software Update.
These problems are disturbing and really shouldn't happen, but they do. However, they can be fixed and you'll find that Mac OS is, overall, much better than the alternatives.
BTW, I just went through this whole mess for crashes on wake from sleep (USB issues) and failure to sleep (printer driver issue). Another computer had DHCP problems and actually needed a reinstall. However both of them are working fine now even though it was a pain getting there.
- gws
Message was edited by: GW Schreyer

I recently updated my primary email address associated with my Apple ID account. When I go to App store on my iPad it still tries to login to the App store using the old email address I had associated with the account, and naturally my password doesn

I recently updated my primary email address associated with my Apple ID account.
Now when I go to App store on my iPad it still tries to login to the App store using the old email address I had associated with the account, and naturally my password doesn't work. I can't figure out how to tell my iPad to login using the updated email address.
So in effect I'm locked out of the app store and I currently have 26 updates waiting.
I've tried disconnecting and reconnecting my IPad to iCloud with no luck.. However I cloud happens to show the correct/updated email address.
Does anyone know how to resolve this?
Thanks

Did you change the email for the Apple ID or did you create a new Apple ID? A new Apple ID cannot be used with content that was bought using a different Apple ID.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621

I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

Do you see a half moon icon in the upper right corner of the screen? If so, you have Do Not Disturb enabled. Settings>Do Not Disturb. Turn it off.
Or do you have system sounds muted?
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center. Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
About the iPad Side Switch - Apple Support

I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have 2nd gen Ipad which I recently updated to ios 6.1.2 and my auto cover lock does not work, so is the lock button, i cannot lock my ipad manually!!

I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
It got really annoying when I tried to use the lock button and it wont lock the sceen!! To test whether the button was allright, I did a long press and the message came if I wanted to shut down the ipad. So the button works fine, but I cannot use it to manually lock the ipad. Now the only way to lock the ipad is to wait for 2 mins (autolock) and still I cannot wake up the Ipad using the lock button. To do that I have to use the Home Screen button
Does any one else have similar issues and any solutions pls!! Cheers

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

Ipad 2 recently updated to 6.1.2 Cycles to sleep mode repeatedly. I

Similar Messages

Maybe you are looking for