IPad 2 Restore Error (-1) with iOS 5.1.1

Hello there everyone
My iPad last night seemed to get itself into a restart loop so I plugged it into iTunes to do a restore. The restore goes ahead and it verifies, extracts and does all the usual steps up until it says "Restoring iPad Firmware". Here it seems to get stuck for a few minutes until it throws an error: "The iPad "iPad" could not be restored. An unknown error has occured (-1)." I have tried pretty much everything in terms of resolving a restore issue such as switching USB ports, restarting iTunes, restarting the computer, changing USB cables, activating "DFU" mode and so on. Nothing. I have looked after this iPad very well, it was a gift, its been in a case its whole life, I travel around with it in a sleeve and I haven't dropped it or done anything that could of caused an issue.
It is still under warranty, this is a replacement unit I got when my first iPad kept throwing up an error 9. I will obviously take it in if there is an issue, however, I can only get to the nearest Apple store in a few weeks.
Much appreciated to anyone taking the time to read this and possibly help me find a solution.
Cheers
Chris

No, I have never jailbroken it, I did read something mentioning that being related to the issue, however, because I have never jailbroken it, it probably isn't related to me.

Similar Messages

  • Unable to restore iPhone 5S with iOS 8.2 (Error -1)

    Unable to restore iPhone 5S with iOS 8.2 (Error -1)
    I tried to install previous versions 8.0 and 7.0.3, it returns another error.
    I tried with iTunes 12.1.1.4 and 11.2
    Even in DFU mode its giving the same error.

    Hey BBRemoshan,
    Thanks for the question. If I understand correctly, you are trying to restore the iPhone and are getting errors. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Resolve iOS update and restore errors in iTunes - Apple Support
    Get help with iOS update and restore errors - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • HT201263 Ipad Restore error -1.

    Ipad Restore error -1...Have Done Restore from Window,MAC and from Different PC's still Ipad not coming out of recovery mode..Whats the Solution guyz?

    Hey vishalv92,
    Welcome to the Apple Support Communities. If you are getting a restore error -1 in iTunes, the following article suggests:
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you need your iPad serviced, you can schedule a Genius Bar reservation at your local Apple Retail Store.
    Genius Bar Reservation
    http://concierge.apple.com/reservation/us/en/
    Also if you need to check your warranty status, the link below will let you know.
    Check Your Service and Support Coverage
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Regards,
    -Norm G.

  • I want to make an update to my iphone 4s to ios 5.1 and i cant. it says that error occured with ios 5

    I want to make an update to my iphone 4s to ios 5.1 and i cant. it says that error occured with ios 5.1.1 what can i do ?
    i change the DNS but nothing happens

    Yes it is.
    Initially I got an error message saying can't connect because of Date & Time settings.
    Went in and re-verified that those were correct.
    Tried to update downloads and then got a new error message: "Can't connect to iTunes Store".
    I live in the US and that's where I created my iTunes a/d and Apple ID.
    I am currently in India --- can that coause confusion re date & time?

  • Please help. At work we have netgear and tplink. Since I updated my mini iPad and iPhone 4S with ios 7 and wifi drops all the time.

    Please help. At work we have netgear and tplink. Since I updated my mini iPad and iPhone 4S with ios 7wifi drops all the time.  What is the problem?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Error 3014 with iOS 5, can't restore iPhone HELP!

    Basically as the title suggests. Downloaded and tried to update iPhone 4 with iOS 5 and it didnt work. Needed restoring but that comes up with the 3014 error. Happened to my iPad aswell. Redownloaded iTunes and that didint work as well as restarting. Dont know what to do.

    same exact problem.
    After trying a number of times and checking all items listed here:
    http://support.apple.com/kb/ts1275
    and here
    http://support.apple.com/kb/TS3694#error3014
    I have same error -
    on a whim, tried to do it via a Windows iTunes install that was a new install -
    i got the idea from an Apple page that asked if i was trying to "upgrade from my home machine or not"
    it repeated locked the Win machine to death - figures - until i had to hold the button down.
    Anyway, i see this reported elsewhere - I am going to the Genius bar tomorrow - 

  • Error 3194 with iOS 7.0.4 restoring

    Hello,
    I want to restore my iPodTouch 5g with iOS 7.0.4.
    He is already with iOS 7.0.4 but he's jailbroken. I wan't to remove the Jailbreak.
    So I go in iTunes and make shift+select my ipsw (7.0.4) but after "preparing the ipodtouch" I see the error -> 3194.
    Why ?? I just wan't to restore my iPodTouch with the same firmware ??!!??
    I already tested modify the host file, TinyUmbrella, change computer and cable.
    If you can help me !
    Thank you very much !

    Not good.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • Unable to restore iPhone 3Gs with iOS 4 (error 1013)

    I recently updated my 16GB iPhone 3Gs with iOS 4 (iPhone2,14.0_8A293Restore.ipsw) using iTunes 9.2 - it worked fine for a few days then all of a sudden I got a pop up message saying "you are unable to make or receive calls, please connect to iTunes". I did so and restored the firmware, it went through the whole cycle, unpacked, installed, verified and when it was about to be completed I got the following error from iTunes:
    "The iPhone "iPhone" could not be restored. An unknown error occurred (1013)"
    The phone remained in restore mode (iTunes icon and USB cable). I tried restoring again with the same result. I then deleted the firmware file, rebooted and reinstalled (same error). I then deleted a reinstalled iTunes (no dice). I tried alternative USB ports and cables and also tried on 2 other computers and tried all this in DFU mode too yet nothing has worked.
    I would also like to point out that it is an original O2 phone with O2 chi[p that has *never been jailbroken*. Any ideas as to whats wrong? Or what I can do? Thanks in advance for you help!

    OK, so nothing else was working so I took my phone into the Genius bar and explained what had happened. The Genius said He was unsure what error 1013 was so he looked it up and explained "It's an error related to the baseband and that more than likely the phone was unable to communicate with Apple servers as Apple had the phone marked as non existent"
    He continued to explain that there was a fix he could do but would be quicker and easier to replace my phone. He did so and I left happy.
    I recomend you just take your phones in if you are having this same issue!

  • HT4623 ipad restore error code3

    Hello everyone, I try to restore ipad 4 (3G) to ios 7.1 and (ipad can not be restore,error 3) come up, what is that mean? Now I have a brick ipad. I try to google and found no solution, if anybody know anything about this error code 3 please share it I would very much appreciate.

    https://discussions.apple.com/thread/5372052
    https://discussions.apple.com/message/24418028#24418028
    more
    https://www.google.dk/search?q=iphone+restore+error+3&oq=iphone+restore+error+3& aqs=chrome..69i57j0l5.5087j0j8&sourceid=chrome&es_sm=91&ie=UTF-8

  • IPad restore error iOS7 update

    Hi all
    just updated my iPad and plugged it into iMac/iTunes - now I have an error from iTUnes saying that iPad is in 'restore mode'
    the ipad is not starting and just shows a diagram stating plug into itunes.
    what shall i do? have had to restore ipad to factory settings, not impressed

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • TS1591 ipad restore error 3004

    trying to restore my ipad - get error 3004 and my ipad stays stuck on the itunes with sync cable picture

    Lolie.r wrote:
    trying to restore my ipad - get error 3004..
    See Here for that error  >  http://support.apple.com/kb/TS3694

  • IPad 1 activation issue with iOS 5.1 update - any fixes?

    Tried to update my iPad 1 over WiFi to iOS 5.1 this morning.  I get a message:
    "iPad could not be activated because activation servier is termporarily unavailable.  Try connecting your iPad to iTunes to activate it, or try again in a couple minutes"
    No luck - I've tried all day.  When connecting direclty to may iMac, I get an iTunes message stating that it cannot recognize the contents of the iPad and suggests a full factory restore (which I want to avoid unless no other option is available).  iTunes does recognize that the iPad has OS 5.1 installed, however.  I've tried a few tricks I've seen posted (such as changing the DNS #), but nothing works to "activate" it.   I don't ever recall needing to "activate" an iPad with the previous updates - only after initial purchase.
    If anyone has the same problem, and has found a fix, I'd appreciate the help.  Thanks.

    Thanks - I hadn't tried that earlier (had only tried the red slider shutdown).   The problem, however, still persists (states activation server is termporarily unavailable).
    After two days of not being able to use the iPad, I"m about to break down and try restoring to factory conditions......  I hope that works.

  • Ipad 2 runs poorly with iOS 8

    after upgrading to IOS 8 my iPad 2  has multiple problems, among them: slow running. frequent crashes. freezing, and more.  Is there any fix for this?

    I regained control of my iPad 2 last night after having endured weeks of extreme slowness with iOS 8!!!  Unfortunately it involves restoring it from scratch.  I personally restored it from the DFU mode (see link) but am not sure if the DFU mode is absolutely necessary.  I ended up restoring when the iPad 2 finally got stuck with the Apple logo while restarting.  So I think the extreme slowness is just a symptom of more serious corruption of the device that will eventually cause it to fail restarting.  I personally had a 5 day old backup in iTunes so the device was restored to an almost identical state.  But if you have an up to date backup there shouldn't be any noticeable differences in content after the restore.  The entire process does take a long time, but it is well worth it seeing that my iPad 2 is almost as fast as the day I got it!!!
    So in summary:
    - connect iPad to iTunes and make a full backup
    - restart iPad in DFU mode
    - iTunes will tell you that it detected an iPad which needs a full restore to factory settings and update
    - iTunes will download iOS 8.1 (as of this date), then will restart your iPad and proceed with the wipe and reinstall
    - after iOS/firmware reinstallation, iTunes will restart the iPad again and will tell you to leave it connected so it can restore from the backup
    - the iPad will successfully restart at which point you can swipe to unlock; it will tell you that it was restored and offers you to set a locking passcode again
    - at the same tim iTunes will give a list of backups to restore from - select your last iPad backup
    - after a while depending on the amount of stuff that you had the restore will complete and you will be happy again!!

  • My iPad was never updated with iOS 5, now I no longer have a pc.

    I was lazy and went a year without updating, my ipad was doing everything i needed it to with pre ios 5 version, my pc has since fried and my iPad is in much need of an update. Wha do I do to move forward?

    In order to update the iOS you will have to use a computer. The highest version of iOS that the original iPad will update to is iOS 5.1.1. If you have an iPad 2 you will update to iOS 7. Any more recent iPad will already have had iOS 5 or later.

  • Restore iPhone 4 with iOS 6.0.1 beta 4 "This device is not registered as part of the iPhone Developer Progarmm"

    Dear Sir/Madam,
    I have had restore my iPhone 4 with iOS 6.0.1 beta 4, after finish the restore it have message "This device is not registered as part of the iPhone Developer Progarmm", so how can I fix it? please could you give me a line as possible.
    Best regards,
    SOVAN

    Beta software is for developers only.
    If you are not part of the developer program, you don't use beta software.
    If you are part of the developer program, you know you don't post here.

Maybe you are looking for

  • BALANCE SHEET IN TO MICROSOFT EXCEL FINANCIALSTATEMENTSWITH IN SAPplzhelpme

    Hi to all ! i) I want to know the transactions code or FM or Report program for to send the MonthEndBalances in to Excel Spread Sheet. ii) I want to know the correct configuration of financial statements with in SAP for month end balances And to incl

  • Error starting the preconfigured OC4J

    When I try to deploy the Webcenter preconfigured 0C4J in jdev 10.1.3.2 this is the message I get. I am running Solaris 10 /export/home/oracle/jdevhome/extensions/oracle.adfp.seededoc4j.10.1.3.2.0/bin> /export/home/oracle/jdevhome//extensions/oracle.a

  • Guest SSID

    Hello i want to configure a guest SSID on WLC 4400 series but i want it to go direct to the internet i mean it can not use the corporate network (server and other applications) and i want layer 2 security on it WPA2 as i know i need to configure a in

  • Why do I get: "An error occurred while trying to submit your post. Please try again."

    Hi, I get this error: "An error occurred while trying to submit your post. Please try again." when trying to reply to a post. Just started today. How can I resolve this?

  • Java Out of memory error when accessing MySQL

    Hi all I've got a weird problem, I programed some code to mirror data between two databases and I was testing it with two different computers each one running MySQL. The first database has 33,000 rows across 40 columns and the second one 380,000 rows