Ipad 2 says i need a code for ios 8
I have two ipads: one ipad air and one ipad 2, both of which run on the same Apple id account. I download ios8 with no problem on my iPad air. Yet, later when I try to download it on the 2 it says I need a code. No, not a password. I have a password for everything and I tried them all it didn't work. Anyone know how I can fix th? Ty.
You would have initially entered this "Passcode" at some time in the past, when either setting it up or when you activated the Passcode on your iOS device. You'll have to remember what you entered when you did this. This is not something Apple "made up" but something you did and you would have entered it yourself.
Here's what Apple says if you forget your Passcode ...
iOS: Forgot passcode or device disabled
Similar Messages
-
I need activation code for my ipad
PLeas i need activation code for my ipad becouse i cant open it ana i know the apple id and password
Only the person who initiated the Activation Lock can remove it. if purchased used/2cd hand,
contact the seller for assistance. This is what they need to do:
Prepare your device to sell or give away
If seller refuses or cannot be contacted, the iPad is useless. There is no workaround for
Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515
If you are the original purchaser, gather up proof of purchase and take that proof + the iPad
to a physical Apple store where they may be able to assist you.
What is the exact complete wording of the error message you are receiving? -
TS1814 My iPad says I need to update iso 4.3.how do I do this
My iPad says I need to update iso 4.3. How do I do this
You don't.
Apple only supports updating to the latest version of ios, which is 5.1.
Plug your ipad into the computer you sync with, select the ipad icon in itunes, open the main info Window and select check for updates. -
My Ipad says it needs restoring but when I try to do this through itunes it comes up with error 3194? Anyone know what I need to do? I can't even get the ipad to turn on just has a sign saying plug into itunes
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Why I need a code for rent a film and where ist the code? (I dont have a card)
Why I need a code for rent a film and where ist the code? (I dont have a card)
it's unclear what you mean
you say you dont have a card which I guess is you don't have a creditcard
in which case the other option is to pay by a giftcard which include a code which you put in
because to rent you have to pay otherwise it's not really renting -
I need a code for verifiing my emailadress. How do get a new one ?
Photoshop Elements 12
Share
Try to send email directly from Photoshop elements
The program ask for a code to verifiing my emailadress
I need a code for verifiing my emailadress. How do get a new one ?Check your email. The screen capture says that they sent one to the email address listed.
-
MMy iPad says it needs 1.4GB more storage to do a back up but I have 7.9GB available of my 20GB storage icloud storage?
If you want to avoid paying for additional iCloud storage you can backup to your computer. Start the latest version of iTunes on your computer, connect your iPad, select General from the row of tab that are presented, then select your backup option.
-
HT1222 How do I get a Code For iOS 8
How do I get a Code For iOS 8
You would have initially entered this "Passcode" at some time in the past, when either setting it up or when you activated the Passcode on your iOS device. You'll have to remember what you entered when you did this. This is not something Apple "made up" but something you did and you would have entered it yourself.
Here's what Apple says if you forget your Passcode ...
iOS: Forgot passcode or device disabled -
I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?
ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1 -
Trying to install update 8.1.3, my iPad says I need 1.5 gb but I actually have 17.1 gb. Why will it not let me install?
It's probably telling you that you need 1.5 more GB than you have available. Hook up your device to iTunes on the computer you sync with and do the update from there. OTA updates require a lot more memory than ones done via iTunes.
Cheers,
GB -
I Need Java code for following Algorithm
* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){} -
I need php code for copy paste our all histroy of browser in a text page.
I need php code for copy paste our all histroy of browser in a text page can any one send me the code please.
You can use an application like GarageSale for doing this....
http://www.macupdate.com/info.php/id/16035/garagesale -
Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR
Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
PBUKR like prps-PBUKR,
IZWEK like prps-IZWEK,
USR10 like prps-USR10,
USR00 like prps-USR00,
USR02 like prps-USR02,
OBJNR like prps-OBJNR,
end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
posnr like prte-posnr,
PSTRT like prte-PSTRT,
PENDE like prte-PENDE,
ESTRT like prte-ESTRT,
EENDE like prte-EENDE,
ISTRT like prte-ISTRT,
IENDE like prte-IENDE,
end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
PSPNR like proj-pspnr,
PLFAZ like proj-plfaz,
PLSEZ like proj-plsez,
end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
into corresponding fields of table it_wbs_prps
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
select pspnr posid
into corresponding fields of table it_wbs_prps1
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
if it_wbs_prps1[] is not initial.
select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
into corresponding fields of table it_wbs_prte
from prte
for all entries in it_wbs_prps1
where posnr = it_wbs_prps1-pspnr.
sort it_wbs_prte by posnr.
endif.
Get data from PROJ Project Master Data
if it_wbs_prps1[] is not initial.
select pspnr PLFAZ PLSEZ
into corresponding fields of table it_wbs_proj
from proj
for all entries in it_wbs_prps
where pspnr = it_wbs_proj-pspnr.
sort it_wbs_proj by pspnr.
endif.
loop at i_t_data.
clear: wa_prps1, wa_prte, wa_proj.
read table it_wbs_prps into wa_prps with key
posid = i_t_data-posid binary search.
read table it_wbs_prte into wa_prte with key
posnr = wa_prps1-pspnr.
read table it_wbs_proj into wa_proj with key
pspnr = it_wbs_proj-pspnr.
i_t_data-zzPBUKR = wa_prps-pbukr.
i_t_data-zzIZWEK = wa_prps-IZWEK.
i_t_data-zzUSR10 = wa_prps-USR10.
i_t_data-zzUSR00 = wa_prps-USR00.
i_t_data-zzUSR02 = wa_prps-USR02.
i_t_data-zzPSTRT = wa_prte-PSTRT.
i_t_data-zzPENDE = wa_prte-PENDE.
i_t_data-zzESTRT = wa_prte-ESTRT.
i_t_data-zzEENDE = wa_prte-EENDE.
i_t_data-zzISTRT = wa_prte-ISTRT.
i_t_data-zzIENDE = wa_prte-IENDE.
i_t_data-zzPLFAZ = wa_proj-PLFAZ.
i_t_data-zzPLSEZ = wa_proj-PLSEZ.
modify i_t_data.
endloop.
endif.
endform. " 0wbs_elemt_attrHi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example, it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM -
Need a code for finding prime no.s from 0 to 100.
Hi,
i need a code for finding prime no.s from 0 to 100.
Please help me out.
Regards,
Santosh Kotra.hai santosh,
here is an example program to find the prime number...........
EXAMPLE:
DATA: BEGIN OF primes OCCURS 0,
number TYPE i,
exp TYPE i,
END OF primes.
DATA: w_mult TYPE i,
w_limi TYPE i,
w_prem TYPE i.
DATA: w_outp TYPE text132.
DATA: w_rtime TYPE i,
w_stime TYPE p DECIMALS 3.
DEFINE add_part.
sy-fdpos = strlen( &1 ) + 1.
&1+sy-fdpos(*) = &2.
condense &1.
END-OF-DEFINITION.
PARAMETERS: p_numb TYPE i, "number to check
p_fact TYPE c AS CHECKBOX, "display components
p_nbpr TYPE c AS CHECKBOX. "nb of primes
START-OF-SELECTION.
GET RUN TIME FIELD w_rtime.
IF p_nbpr IS INITIAL OR p_numb LE 12000.
PERFORM eratostene USING p_numb.
add_part w_outp p_numb.
READ TABLE primes WITH KEY number = p_numb.
IF sy-subrc = 0.
add_part w_outp 'is prime'.
ELSE.
IF p_fact IS INITIAL.
add_part w_outp 'is not prime'.
ELSE.
add_part w_outp '='.
w_limi = p_numb.
LOOP AT primes WHERE exp GT 0.
CHECK primes-number LE w_limi.
IF w_prem GT 0.
add_part w_outp '*'.
ENDIF.
IF primes-exp GT 1.
add_part w_outp '('.
add_part w_outp primes-number.
add_part w_outp '^'.
add_part w_outp primes-exp.
add_part w_outp ')'.
ELSE.
add_part w_outp primes-number.
ENDIF.
w_limi = w_limi / ( primes-number ** primes-exp ).
IF w_limi = 1.
EXIT.
ENDIF.
w_prem = 1.
ENDLOOP.
ENDIF.
ENDIF.
WRITE: / w_outp.
IF NOT p_nbpr IS INITIAL.
DESCRIBE TABLE primes LINES sy-tmaxl.
CLEAR: w_outp.
add_part w_outp 'Number of primes:'.
add_part w_outp sy-tmaxl.
WRITE: / w_outp.
SKIP.
LOOP AT primes.
WRITE: / primes-number.
ENDLOOP.
ENDIF.
ELSE.
PERFORM factors.
ENDIF.
GET RUN TIME FIELD w_rtime.
w_stime = w_rtime / 1000000.
SKIP.
CLEAR: w_outp.
add_part w_outp 'Calculation time:'.
add_part w_outp w_stime.
WRITE: / w_outp.
FORM eratostene *
FORM eratostene USING in_number TYPE i.
DATA: BEGIN OF no_primes OCCURS 0,
number TYPE i,
END OF no_primes.
DATA: cnum TYPE i,
dnum TYPE i,
limi TYPE i,
mult TYPE i,
puis TYPE i,
cmod TYPE i.
IF NOT ( p_fact IS INITIAL AND p_nbpr IS INITIAL ).
limi = in_number.
ELSE.
limi = sqrt( in_number ).
ENDIF.
cnum = 2.
WHILE cnum LE limi.
READ TABLE no_primes WITH KEY number = cnum.
IF sy-subrc NE 0.
primes-number = cnum.
mult = 2.
puis = 1.
dnum = mult * cnum.
WHILE dnum LE in_number.
READ TABLE no_primes WITH KEY number = dnum.
IF sy-subrc NE 0.
no_primes-number = dnum.
APPEND no_primes.
ENDIF.
IF NOT p_fact IS INITIAL.
cmod = dnum MOD ( cnum ** puis ).
IF cmod = 0.
cmod = in_number MOD ( cnum ** puis ).
IF cmod = 0.
primes-exp = puis.
puis = puis + 1.
ENDIF.
ENDIF.
ENDIF.
mult = mult + 1.
dnum = mult * cnum.
ENDWHILE.
APPEND primes.
CLEAR: primes.
ENDIF.
cnum = cnum + 1.
ENDWHILE.
ENDFORM.
FORM factors *
FORM factors.
DATA: ex_factors TYPE string,
mod TYPE i,
still TYPE f,
factor TYPE i,
exponent TYPE i,
square TYPE f,
fac_string TYPE text40,
exp_string TYPE text40.
IF p_numb LE 3.
ex_factors = p_numb.
ELSE.
factor = 2.
still = p_numb.
DO.
CLEAR: exponent.
mod = still MOD factor.
WHILE mod = 0.
exponent = exponent + 1.
still = still div factor.
mod = still MOD factor.
ENDWHILE.
IF exponent EQ 1.
fac_string = factor.
CONCATENATE ex_factors '*' fac_string
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ELSEIF exponent GT 1.
fac_string = factor.
exp_string = exponent.
CONCATENATE ex_factors '* (' fac_string
'^' exp_string ')'
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ENDIF.
factor = factor + 1.
square = factor ** 2.
IF square GT still.
EXIT.
ENDIF.
ENDDO.
IF still GT 1.
CATCH SYSTEM-EXCEPTIONS convt_overflow = 1.
fac_string = factor = still.
ENDCATCH.
IF sy-subrc NE 0.
fac_string = still.
ENDIF.
CONCATENATE ex_factors '*' fac_string
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ENDIF.
SHIFT ex_factors UP TO '*'.
SHIFT ex_factors BY 2 PLACES.
ENDIF.
WRITE: / p_numb RIGHT-JUSTIFIED.
IF ex_factors CA '*^'.
WRITE: '=', ex_factors.
ELSE.
WRITE: 'is prime'.
ENDIF.
ENDFORM.
HOPE THIS WILL BE HELPFULL.
regards
praba. -
I need ready code for a simple paint program today
hi all I need ready code for a simple paint program today for me ics projct
plz give me a halp on this give me what you have with you and it is so good if it look like this :
Design a GUI based drawing Java application that works like a simple paint program
1-There should be a number of buttons for choosing different shapes to draw. For example, there should be a button for rectangle. If user presses the rectangle button, then he can draw a rectangle using mouse. Similarly, there should be a button for each shape(rectangle, circle, ellipse, and line etc.
2-The shapes can be filled with different colors.
3-There should be option of moving .
4- There should also be three menus including File, Shape, and Color menu.
i. File menu can have menu items New and Exit. If user selects New, the drawing area will be cleared and all shapes will be erased.
ii. Shape menu will serve the same purpose as of feature 2 described above. It will have menu items for drawing all the different shapes. For example, there will be menu item for rectangle; so user can draw a rectangle by selecting the menu item for rectangle.
iii. Color menu will serve the same purpose as of feature 3 described above. It will have menu items for all the colors which are shown in color buttons. The user can select a color from this menu and then click inside a shape to fill it with the selected color.Read the Swing tutorial. There are sections on how to use menus and painting and all other kinds of stuff you need to do this homework assignment. Nobody here is going to write the code for you:
http://java.sun.com/docs/books/tutorial/uiswing/TOC.html
Maybe you are looking for
-
Problem with Adobe PDF reader for Window 64 bit using Visual Studio professional 2013
Hi, Does Adobe PDF reader support window 7 64bits? Best regards, Seah
-
hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me
-
My I pad won't turn on
-
How to assign string to structure in unicode system R/3 4.7 ?
Hi All, We are upgrading system from non-unicode to unicode. While passing a string to a structure ( MOVE RECEIVERS-RECEIVER TO RECEIVER_OBJECT, where RECEIVERS_RECEIVER = string RECEIVER_OBJECT = structure ) following error is thrown : "RECEIVER_OBJ
-
How come start up screen colors look washed out.
Hi, I tried to change the background for the login startup screen on my iMac. I noticed that the colors from my image appears faded. When I look at the image in other origram(ie. preview) the colors are what they should be. So what is OS X(Lion) do