Ipad 2 screen appears to be dead

I accidently inserted my Iphone charger USB into the Ipad 2 and tried to back up in the computer. Now I found my Ipad 2 screen appears to be dead. Only the apple image shown and the Itune cannot identify Ipad. 
What should I do?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Also see here for
Unresponsive iPad
http://support.apple.com/kb/TS3281

Similar Messages

  • The ipad screen appearance streaks mold (like status "bamboo root" on the DSLR camera lens)

    I have bought iPad2 two years ago (3G 16GB )
    Recently the ipad screen appearance streaks mold (like status "bamboo root" on the DSLR camera lens). This mold streaks increasingly spread.
    Is it the manufacturer fault?
    How can I fix it?
    I currently live in Vietnam. I'm looking forward to your help.
    Thank you!
    Regards

    not true! I served with apple devices such as ipod, iphone, but have never been, nor google search on that information

  • Ipad screen appears to go to double tap to access anything

    My ipad screen appears to go highlight icon then double tap the icon before it will open.

    Sounds like you have VoiceOver (one of the accessibility features) 'on'. Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut.
    If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • IPhone 5s cuts out blue screen appears then Gos Dead

    fone cuts out on me when making calls or on Internet  then Gos to a blue screen then the White screen with Apple logo then shuts down and will not come back on t

    Hello, Obeynelson.  
    Thank you for visiting Apple Support Communities.  
    I understand your iPhone restarts on it's own and will not power on.  I would start with the troubleshooting steps that I have attached below.  Try these steps and please reply back if the issue persists.  
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers, 
    Jason H.  

  • My iPad screen appears to be unresponsive in an invisible line noticeable when using various apps.

    My iPad seems to have an unresponsive lnvisible line down the centre so when playing various apps such as words with friends you can't move a letter tile across that line. Occasionally the screen goes crazy like a hundred buttons are being pushed at the one time and it flicks between different screens despite the screen not being touched.

    Hm... That's very strange. Are the apps made by the same developer? If so, it may have something to do with that. There may be a fault in the programming.

  • My actual (brand new) iPad screen appears to have bubbles after on it after I removed a screen protector. HELP

    Can someone help:
    I bought a new iPad from the Apple Store in Danbury CT the day before yesterday (it's a Verizon iPad). I bought a screen protector for it today and after deciding to remove it, was left with bubbles on the actual screen itself.
    Any thoughts.....Thanks.

    I just really find it hard to believe that the screen itself has bubbles in to, but we can't see the device. Why don't you take it to an Apple Store and have a genius look at it? Or take it back to Verizon, since they put the screen protector on it.
    Is the touch screen responsive ... It works OK?

  • IPad freeze up and appear to be dead and only show a black screen

    My iPad2 freeze up and appear to be dead and only show a black screen, why is it so?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. It happens occasionally judging by the posts on here, but only once so far to me.

  • IPad appears to be dead

    Hiya
    My iPad appears to be dead. Nothing out of the ordinary happened. It was switched on and when I pressed the home button the screen went grey then...nothing.
    I have tried charging/reset/hard reset. Nothing happened. I have also tried to connect to iTunes to reset but the screen is still black. I can hear a very low sound though...not sure what's happening but I thought was worth checking here before sending it away.
    Cheers
    K

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • HT201263 hi, my ipad screen is not responding: nothing appears. How can I restore it?

    /hi
    my ipad screen is not responding. Nothing appears. It seems to turn on but nothing appears on screen.
    maybe my niece of # years old that played with it entered too many tomes wrong passcode.
    Anyway, how can I restaure it?
    The itunes doesn't recognize my ipad since I can t enter the password.
    Please help. I am desesperated
    Thanks
    Elinor

    -reset the device will not get the passcode to go away
    you can restore by putting it in dfu you mode. plug it in to the computer pull up itunes, then hold down the home button and the power button at the same time, when you see the apple logo let go of the power but keep holding the home button in tell you get a message to restore

  • When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

    When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new.
    And if none of that works, take it to an apple store or call apple support

  • The icloud backup window appeared on my ipad screen.  It won't go away and my ipad appears to have locked.

    The icloud backup window appeared on my ipad screen.  I pressed Ok without thinking and everything on my ipad seems to have locked.And the icloud backup window won't go away.

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until the iPad restarts, so you will be able to use the device again

  • HT204053 iPad disable was appear on my iPad screen. Pls help me to solve it. Connect to iTunes also appear belon the text.

    My iPad cannot open. iPad disable appear on my screen. Help me to solve It.

    You will need to connect it to a computer's iTunes, you should then be able to reset your iPad.
    Device disabled : http://support.apple.com/kb/HT1212

  • My iPad appears to be dead.  Used it yesterday, had it charging all night, now does nothing.  Any ideas?

    My iPad appears to be dead. Put it on the charger last night. Now, it will do nothing.  Any ideas?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT1349 My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode window appears when I try to restart the device. But, there is no response when I try to type in my code. How can I revive the de

    My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart  the device. But, does not respond to typing. How can I revive the device?
    The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Error - Material can no longer be changed

    Hi Experts, We are facing an error in the SRM portal. There is a PO with 4 line items where the GR/IR has been issued for all the 4. Then the user wants to increment the price of the 4th line item and so he deletes the 4th line item and adds a new li

  • Urgent Help with bytes

    Hi people, I'm in urgent need of help for a project I'm working on for my degree. Background: I am writing a package that will allow connectivity to a c++ server via streaming sockets. The c++ server sends/receives data as unsigned bytes. This is my

  • Iphone jack not working?

    has anyone have problems with the iphone audio jack? I had actually changed last week my Iphone 4S becuase I had  a bluetooth conections problems and the phone jack was not working ( only one side worked when I plugged my ears phones). With the new i

  • Can't Install Photoshop on NB505-N508

    Hello. When I try to install Photoshop CS5 on my NB505-N508 (yeah, I know it's too small, but I just want to try it ), the installation hangs and can't be cancelled. I can't kill the process either, so I have to force a shutdown, and it hangs on the

  • I need to purchase Photoshop, Indesign and Illustrator. Which plan should I choose?

    I need to purchase Photoshop, Indesign and Illustrator. Which plan should I choose? Does the 'Individual Complete plan at A$49 p/m include Indesign?? Their description of this plan only states "Latest Photoshop, Illustrator, and more, plus cloud feat