IPad 2 screen no longer works for swipes or taps

I tried to use the iPad this morning and it was frozen. My password screen was there but would not accept any taps. I tried the reboot steps but no change. Finally, I synced it to itunes and ran the restore. It is now restored to original seetings, showing the home screen, but still won't accept a tap or swipe. BTW - I have only cleaned the screen with a damp towel, no chemicals or cleaners.
Any suggestions?
Thanks.

I am pretty careful with it. I have a Hazard 4 paded case that I use when flying and the rest of the time it sits in a cradle on my desk. I will go down the repair road since I have tried all of the apple manual tips and tricks.
Thanks.

Similar Messages

Airplay no longer works for me from my iPhone 6 or iPad Air 2

Airplay is no longer working for me. I have three Apple TVs, and stream from my personal cloud. I can no longer select any of the Apple TVs from my iPhone 6 or iPad Air 2. This worked for months up until the last few days. Does anyone know how to fix this?

Hey philipfromcharlotte,
Thanks for the question. If I understand correctly, you are having trouble using AirPlay from an iPhone and iPad to an Apple TV. I would recommend that you read this article, it may be able to help the issue.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive it nothing happens.

I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive touch it nothing happens.

Thank you for that update.
I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it first as a new device, and verify that it works properly, then restore from your backup with the same article below to ensure that it is still working.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it does not work correctly when you set up the phone as a new device, I would next seek service for your iPad:
http://www.apple.com/support/ipad/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

Command plus is no longer working for me correctly in Safari 8.0.2.

Command plus is no longer working for me correctly in Safari 8.0.2. When I use it to zoom in a safari window, it makes fonts bigger instead of scaling the entire page bigger like it used to. What changed or what did I accidentally change? This is only happening in Safari. When I use Command Plus in a Chrome or firefox browser window, it works perfectly still.
To explain this a little better, I have a 27" iMac. When I open a browser widow in safari like yahoo.com, The content fits in about a 10.5" section of the screen. If i go to full screen or enlarge the window to fit the full screen the same 10.5" content is centered in my screen. Previously, I could use Command Plus to zoom and the entire page would scale increasing from 10.5" to eventually filling the screen. Now when I use command plus, the font's get bigger and bigger but the page width stays at 10.5"

Hi petraidm,
Welcome to the Support Communities! If I'm understanding you correctly, it appears you have updated Safari to the latest version, but are still using Mountain Lion as your operating system, is that correct?
You may need to adjust your screen resolution, or the zoom settings in the Accessibility pane of System preferences. Usually, zooming changes the size of text or content in a window -- not the size of the window itself. So I usually go to full screen mode in Safari, and then zoom in if I need to enlarge the text.
OS X Mountain Lion: Zoom content on the screen
http://support.apple.com/kb/PH11488
If you have difficulty seeing or reading items on the screen, you can use Accessibility preferences to magnify items on the screen. You can zoom the entire screen or zoom the area that has keyboard focus in a separate window.
Set up zoom
Choose Apple menu > System Preferences, click Accessibility, and then click Zoom.
Do either of the following:
To zoom with keyboard shortcuts, select “Use keyboard shortcuts to zoom.”
To zoom with your mouse or trackpad, select “Use scroll gesture with modifier keys to zoom.”
Choose where the magnified content appears with the Zoom Style pop-up menu.To display it in a window near the mouse cursor, choose Picture-in-picture. To display it on the entire screen, choose Fullscreen.
To set options for zoom or the zoom window, click More Options.More Options panel
You can also turn on zooming by pressing Command (⌘)-Option (⌥)-F5 and selecting options in the Zoom section.
Zoom with keyboard shortcuts
To zoom in, press Command (⌘)-Option (⌥)-Equal Sign (=). To zoom out, press Command (⌘)-Option (⌥)-Minus Sign (-).
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose the Fullscreen zooming, the entire screen displays the magnified image.
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
Last Modified: Aug 8, 2013
OS X Mountain Lion: Shortcuts for Accessibility preferences
http://support.apple.com/kb/PH10566
Turn zoom on or off
Command (⌘)-Option (⌥)-8
Zoom in
Command (⌘)-Option (⌥)-Equal Sign (=)
Zoom out
Command (⌘)-Option (⌥)-Hyphen (-)
Turn image smoothing on or off
Command (⌘)-Option (⌥)-Backslash (\)
Display the zoom window when needed
Hold down Option (⌥)-Control (^). Release to close the window.
OS X Mountain Lion: Adjust your display resolution
http://support.apple.com/kb/PH11462
I hope this information helps ....
- Judy

Bridge place command no longer works for indesign 2014

Bridge place command no longer works for indesign 2014. It only gives Photoshop as an option. How can I get all other Adobe programs listed under Place ?

Your post sounds like an InDesign question.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Syncing with iPad mini does no longer work since latest update of iTunes

Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

Music buttons on the lock screen no longer work with ios7.

on my 4S, when ios 7 was loaded, bluetooth music play buttons and the music buttons on the lock screen no longer work. Hence, I can neither use the music buttons at the lock screen nor can I use the control on my car (bluetooth...) to change songs. Volume adjust at the lock screen appears to work. Can't pause/play or move to the next/prior music.

I did see a reply on a similar post:
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, some onther users have reported the same problem so it it may be a bug in iOS
I did the RESET DEVICE only to mine (i.e., did not reset all settings...) and it did work to fix the buttons (haven't tested on the car, but it'll likely be OK now...). Certainly there is a bug somewhere that needs fixed...

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

How can I sync my iphone songs to a new library without losing the songs on my iphone. I no longer have access to the old library as it was on a company computer that I no longer work for.

how can I sync my iphone songs to a new library without losing the songs on my iphone. I no longer have access to the old library as it was on a company computer that I no longer work for.

Third Party software do a google search

My iPhone seems to be in visual impaired mode, and the touch screen no longer works. How do I get back to normal mode?

My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works. I have tried rebooting the phone without success. How can I get back to normal mode?

I solved my own problem by clicking the home button 3 times.

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

Have you rebooted your home router?

Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc. HP does not have any any down loads for this. Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My facebook app no longer works for my iphone after i sync it to my laptop!

Why does my facebook app no longer works for my iphone after i sync it to my mac book pro?
I added this app for facebook and then i synced it up with my mac book pro, but afterwards it lost the app, and I can't download it anymore... why is that?
And how do I manage to put it back on my iphone?

Hello hersheygirle,
Welcome to the Discussions Boards.
Re-download the Facebook APP on your computer and then sync it to the iPhone.
Make sure your computer is logged into the same iTunes ID that shows up on your iPhone when you try to download an APP on the iPhone.
http://support.apple.com/kb/HT2519
Hope that helps,
Charles H.

IPad 2 screen no longer works for swipes or taps

Similar Messages

Maybe you are looking for