IPad 2 side buttons no longer work after switching screen

My screen got cracked 4 months ago, but I still used it perfectly fine. Last week i paid a guy to replace my screen, after which, the side buttons (top switch, screen lock/mute, and volume buttons) stopped workiing. The home button is the only button that works. What is causing this and are there any apps i can download that can lock my screen with (so i can tilt is sideways without the screen shifting)? BTW, the guy who did the job said it's not his fault so i cant do anything on that end.

aThen a button will appear on your screen click that then it will give you a device option click on that and you can lock your screen turn the volume up and down and lock the screen rotation. Hope this helps!

Similar Messages

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Standby button no longer works after upgraded OS from 4.... to 5.0.0.484

Hi all. I am new to BB and have a Tour 9630. After "upgrading" my OS yesterday the former "standby" (mute) button no longer works. I tried to find a place to assign "standby" mode to the left or right shortcut key but no luck. Also, I noticed my Opera browser is significantly different (and more annoying) because clicking the trackball goes back.... Any thoughts on either issue would be appreciated. Thanks.

Ok, so apparently I haven't looked at my phone too closely. The old Pearl model only had one button up top, which you used for both mute and standby. The new Tour apparently has two- the one on the right is the mute and the one on on the left is the lock.
On the Pearl you could press * to lock and *+[Green talk button] to unlock. On the Tour the only option you have to unlock is to press the lock/unlock button on the top left. It's pretty clear when you look at the top of the phone. However I usually have mine in a silicone case, which does have markings but they're very hard to make out.
So the phone locks and unlocks just fine, even after the OS 5.0 upgrade. However, I'm still wary about getting rid of standby mode if, in fact, it is a battery-saver. (Which I'm pretty sure it is)
Bring back standby mode, Blackberry!!

Why are the back/forwards buttons no longer working after upgrade?

Hi, I recently upgraded from Firefox 3.5 (I believe) to Firefox 4.0.1 and now the back and forwards buttons no longer work. I tried resetting the settings under the toolbars > customize, etc. That didn't work. FYI, I'm using a mac. Any solutions? Thanks in advance...

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Share button no longer working after updating to iOS 6.1.2

So this morning I updated both my iphone and ipad to 6.1.2 and now the share buttons in the app store no longer works, when I use the search function. To be specific if I do a search for anything and then try and open one of the apps in the search results and push the share button it never opens up the window to select a sharing option. The loading wheel at the top of just spins endlessly, but if I go to the "featured apps" page and click an app the share feature works. Worth noting that my iPad was also updated and works regardless

Hey I get this too does anyone else get it? Would just reinstalling fix it?
I have an iPhone 4 with 6.1.2.
xeni

My Side Buttons No Longer Work

Just upgraded to Mountain Lion a few days ago and suddenly my side buttons on my Logitech mouse no longer work. Can anyone help me out with solving this problem?
Also, while my logitech bluetooth mouse works, my mac can't detect it so I can adjust the prefrences.

Can anyone help me out with solving this problem?
If anyone can, it's Logitech. Check their website for updated drivers.

Eject button no longer works after iTunes audio CD burn

Hi, after upgrading to the latest version of iTunes, the eject button on my drive does not work after burning a CD.
It still works with other applications, just not iTunes (but it did before the latest upgrade).
Luckily, I can still eject disc's using the iTunes, or Windows Explorer software - but it's a pain.
Is anyone else having this problem?
Thanks in advance for any guidance you can provide!

For my Matshita UJ-831Da CD/DVD drive, the driver version showing in device manager is 5.1.2535.0. I just now clicked on "update driver" and the reply was that a newer version could not be found.
But why would doing a "Run Diagnostics" in iTunes now freeze / crash my whole system when it never did before? It only began doing that after it also began failing to burn CDs. Again, the iTunes software is the only software that has ceased to burn CDs.
Several months ago, I finally reached by phone a girl at Apple tech support who first denied there were any known problems. But when I told her that the web was full of thousands of people screaming about this very issue she recanted and admitted that iTunes was having these problems, that they had posted the fix for some of the other CD/DVD drives but not mine. She then said, "but if you pay $35 I'll tell you how to fix it." Absolutely unethical. That's like buying a car then being told that there's now an extra fee for being told how to start it. She may have lied about knowing what the fix is, but either way it's absolutely unethical.
The problem is iTunes. iTunes changed and now won't drive the same current drive it worked with when iTunes accepted my money, in advance, to purchase and burn music at future dates. iTunes should fix the problem.
I'm willing to go through the leg-work, to try all of Apple's instructions here, but Apple also needs to follow through with this.
Thanks again for your help.

Ipad 2 Print button does not work after 6 upgrade?

Since we upgraded to iOS6, our print button does not work and does not find our printer. It was working fine until iOS6. Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print. He then started talking about a restore but the phone line went dead. Has anyone had this problem?

Today's iOS 6.1 update fixed the printer problem.

[SOLVED] Suspend button no longer works after update

Recently update my system, and now pressing the suspend button (Fn+F3 in my case) doesn't suspend it to ram as it did before.
Running acpi_listen and hitting the button gives me the output "button/sleep SBTN 00000080 00000000 K" so clearly it's hearing it. Pressing the brightness buttons on the keyboard works (changes the brightness as expected), pressing the power button works to shut it down completely, closing the lid suspends it as expected... Just the suspend button stopped working.
I saw a post about a different thing which mentioned systemd's config file "/etc/systemd/logind.conf" so I tried uncommenting the line in that file which tells systemd to handle the suspend button, but no luck, not even after rebooting to hopefully get it to source that file.
Here is my ACPI folder's tree...
./events
./events/anything
./events/lm_battery
./events/lm_lid
./events/lm_ac_adapter
./handler.sh
./actions
./actions/lm_battery.sh
./actions/lm_lid.sh
./actions/lm_ac_adapter.sh
It has everything it should have, i think. The handler script has a "case" for suspend button.
Running "sudo pm-suspend" in a terminal suspends it, as does going into the XFCE shutdown menu and hitting suspend.
I can't think of anything else to try. Also, I did look around for other posts, but wasn't able to find anything. If I missed something, I appologize for the double post.
Thanks,
--Scott
EDIT: I swear I meant to put this in "laptop issues." This is embarrassing.
Last edited by scott_fakename (2013-01-12 21:41:45)

Sorry for not responding more punctually. handler.sh is as follows (the only modifications to it would have been things done by the system itself, as i haven't touched it)
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
Also, here is logind.conf, which is back to its original state:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=suspend
#HandleHibernateKey=hibernate
#HandleLidSwitch=suspend
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
The line that i uncommented (to no effect) was "HandleSuspendKey=suspend".
I sort of have a workaround, inasmuch as I use XFCE and XFCE can handle the suspend key just fine, but the catch is that I have to have the DM up in order for it to do so, so it's not really a "solution" per se. Anyway. I don't know what else to try. The only other thing I could think of was to look in to laptop mode utils to see if others had had problems with it, but googling around yeilded nothing pertinent to this particular issue.

My iPads sleep/wake button no longer works.

It is only 3 months old and I use a magnetic lock instead of the button. I don't know if my warranty covers this issue. Also, occasionally the button glitches and it locks, unlocks, then asks to "slide to shutdown" all in one go. Please help!!!!!!!!

The warranty will cover that is the device is only three months old and if the defect was not caused by accidental damage - like you droppoing it. I'm not accussing you of anything, I am just explaining how the warranty works.
I would try resetting the device - even though you need the sleep button to perform the reset. See if that works and then see if it helps at all.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
I would also try the iPad without the cover for a while to see if the cover is playing games with the lock feature.

Enter Button no longer works after update

I updated FF to the most recent version this morning. upon completing the update I typed an address into the URL bar and hit enter, nothing happened.
I've noticed that I must manually click every single time on the green arrow in order to proceed after typing and address in the URL bar, is there a setting in the options/preferences that can re-enable this feature?

I updated FF to the most recent version this morning. upon completing the update I typed an address into the URL bar and hit enter, nothing happened.
I've noticed that I must manually click every single time on the green arrow in order to proceed after typing and address in the URL bar, is there a setting in the options/preferences that can re-enable this feature?

Touch no longer works after replacing screen for Yoga 2 Pro

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LENOX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

ColonelONeill wrote:
Does uninstalling and reinstalling the touch screen device under Device Manager get it to show up?
Well, I did update the display adapter and the HID-compliant touch screen driver, and a host of other drivers. Also did a reinstal of windows from system restore, but I guess as far as specifically uninstalling and reinstalling the touch screen device, I guess not.
I sent the laptop to the company who I bought the screen from, (Laptop Repair 365) because they said that they would fix it for free. I sent it yesterday and they already got it today and said they fixed it.
I asked what was wrong and they said a falty screen and they replaced it under warrenty for free. Great company!
I still don't understand. The touch worked when running linux so how could it be a falty screen?

Some things no longer work after switch to direct LDAP mode

Hi,
today i have tried switching to direct ldap mode following the documentation
now i can no longer send mail directed to hosts as
[email protected]
i always get a 5.1.1 unknown or illegal alias:
whereas email@{subdomain}.domain.com is ok, as long as the subdomain is known to the MTA, ie it is an alias object in the DC tree
also, some aliases defined in the file "aliases" are no longer recognized,
for convenience, i had some default forward lines likes
*@domain.com: @otherrelay:*@domain.com
which effectively acted like a smarthost, ie mail to addresses not known in domain.com were forwarded to "otherrelay"
now, probably i could solve the second problem either using a smarthost in the DC tree 's domain config
the first problem, however, puzzles me...it look like if it doesn't find a matching address, and the host is not known as a domain, then further rewrite rules are not applied ?

i found the problem,
in option.dat, DOMAIN_UPLEVEL must be set to 0, in order to have the old behaviour (wildcards in aliasfile, and possibility to send mails directly to specified hosts)
i had set it to 1, in the hope the MTA would be more tolerant to find users (if [email protected] is not found, then maybe it exists at [email protected], so use this instead) as some of our users have quite problems addressing other users in the correct subdomain.

Left mouse button does not work after last upgrade on one computer.

Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

IPad 2 side buttons no longer work after switching screen

Similar Messages

Maybe you are looking for