IPad 2 Smart Cover Design Flaw

Am I the only one to recognize that the Apple Smart Cover's greatest feature is also its fatal flaw? The Smart Cover’s “innovative” feature is that it folds to prop the iPad up for typing or better viewing, with its primary function to serve as a cover to protect your treasured iPad’s glass screen. However, hasn't anyone noticed that when you fold the Smart Cover into either of the two propping positions that the inner portion of the cover (the micro-fiber that supposed to "protect" the screen) comes in contact with whatever surface it is that you're using as a base. So, when you fold the cover back onto the iPad, any nastiness (e.g., dirt, dust, food, etc.) that was on the surface of the base (e.g., table, desk, airplane fold-out tray, etc.) has now attached to the inner portion of the cover and will then be in direct contact with your iPad's precious screen.
I love Apple, but this is one case where I believe they missed the mark and added fuel to the argument that they sometimes put too much emphasis on form and not enough on actual function. And, for the price that they’re asking for the Smart Cover, I, for one, expect more from Apple.
Message was edited by: Steven Corum

It takes an extra moment of thought, but my Smart cover can be folded either direction and still can be used in the two positions. But as others note, I would never set my iPad down on any surface that I had not checked to see if it was clean. Just as I do not use it with dirty fingers or hands.
I think that folks are expecting much more from a Smart Cover than it was actually designed to meet. It is for protecting the display, and incidentally was given the ability to hold the iPad in the two display positions. But it is only a cover, it is not a case. If you need the facilities of an actual case, this is not the product for you. It was made to apply and remove in a second. It facilitates its application by self-adjusting its position with the magnets.
But I am happy with mine as a cover to protect the glass display when not in use and nothing more. I remove the cover when I use the iPad. I have bough the Compass tripod stand by 12 South for positioning the iPad for serious use. I love using it with my Apple BT keyboard when I am using it for serious writing. However, for casual use like lounging in a comfy chair or in bed to read, surf or watch videos, I use it without the cover or anything else. If I am watching videos it is paired with BT headphones for the audio channel.
Rather than finding all the flaws of each accessory that does not meet your needs, why not look for the ones that other geniuses have devised that perhaps do?

Similar Messages

  • I just got an iPad mini Smart Cover and it keeps locking my iPad

    I Folded the Smart Cover to the back and sometimes it just looks itself like that. Why?

    Obviously it shouldn't do this.  Either the Smart Cover is defective - or your iPad is too sensitive.   See last comment in the following similar discussion - Apple replaced the person's iPad. 
    My iPad Air smart cover is causing my screen to turn off when I flip it so that it lies across the back of my iPad

  • IPad 2 smart cover, mine is falling to bits and has stained my screen protector. Anyone else had the same problem?

    iPad 2 smart cover. Mine is falling apart and has marked my screen protector with black lines. Anyone else experienced this?

    Mine has worked fine.  What model do you have, the leather or the other?  I've read of others using screen protectors like Zagg absorbing some of the dye.  Of course considering the cost they are to produce ($12 is what I read for the leather) it doesn't surprise me some of the dye is coming out.  I have wiped my black leather down with high grade leather cleaner / oil and you can clearly see it on the rag. 

  • Apple iPad 2 Smart Cover For iPad 1

    Helo folks
    Since no difference between first and sec gen. Of pad's screen , length and width sizes, i want to get a ipad 2 smart cover for my original ipad 1 , possible ? .. It should
    ?

    The display size and resolution are the same, the iPads themselves are not exactly the same dimension. Also, the new iPad has magnets inside of it help the smart cover attach itself to the new model.
    You would be wasting your money, the Smart Cover is for the iPad 2 only.
    Dah•veed

  • Ipad 3 smart cover wake up slower than ipad 2? anyone?

    ok well i was watching youtube for ipad 2 smart cover reviews and i noticed that the ipad 2 smart cover wakes up almost instantly and then compared it to my ipad 3 and mine took 1-2 secends.
    anyone else have this problem?????? please answer

    Yes. I called Apple support today. My issue is when the iPad 3 has been in sleep mode for more than 10-15 min, it takes more than a second for the lock screen to appear when the home button is pressed. It is faster with the smart cover. Apple helped me restart and reset the device but it didn't help the situation.

  • Does the iPad 3 smart cover fit the iPad Air?

    does the iPad 3 smart cover fit the iPad Air?

    No - if you look at the specs, the sizes of the two devices is quite different.
    http://www.apple.com/ipad/compare/ (the iPad 3 and 4 are near identical in size to the iPad 2 dimensions).

  • IPad 2 Smart Cover and Airport Xray

    Is there any ill effects when you send your ipad 2 with a smart cover (which contains magnets) through the airports Xray scanners?
    Just curious since xray scanners use magnets to scan correct?

    Mine has skated through several airport scanners with no bad effects.   A a matter of interest, while they still want you do put your laptop in a seperate bin, there is no problam putting a pad thru inside a briefcase or suitcase.  They seem to know what it looks like on the scanner, and i have not had to get it out at all.

  • IPad 2 smart cover sleep/lock problems?

    Been using my iPad for a good month now.  I'm loving it.  I have noticed that using the smart cover, you have to have the pass code on in order for the cover to put the device into sleep/wake.  When I have the passcode setting off, the smart cover aligned to device fine but does not give the audible click upon closing.  When passcode if off, I also notice a higher battery drain versus the lock code turned on and I hear the sound click.  Do I have a defective cover?  Suggestions??

    Mine has worked fine.  What model do you have, the leather or the other?  I've read of others using screen protectors like Zagg absorbing some of the dye.  Of course considering the cost they are to produce ($12 is what I read for the leather) it doesn't surprise me some of the dye is coming out.  I have wiped my black leather down with high grade leather cleaner / oil and you can clearly see it on the rag. 

  • IPad air Smart Cover not aligning properly

    Is anyone else having issues?
    My nice new iPad air arrived on Tuesday, 3 days latter I received my apple Smart Cover! Why not send them together? That's another storey.
    After a days use, I notice that the cover is not aligning properly, then I read online that it could be an issues with the actual iPad not the cover, anyone else having these problems?
    Experienced outcomes?
    Regards
    Norm.

    You don't have this option?
    Open Settings->General->Lock/Unlock...make sure it is toggled on.
    Also, try restarting the iPad then check Settings again.
    When the iPad recognizes that the cover is installed that setting should appear and as I can recall, it defaults to that setting being ON.  Are you using an Apple Smart Cover or a third party cover.  If it's an Apple cover & that setting doesn't appear, take the cover back to the store & exchange it,  there may be a problem with the magnet placement in the cover.  If that doesn't fix the issue then you may have to make an appointment at a Genius Bar to have them run a diagnostic on your iPad.

  • My iPad 2 smart cover keeps making scratches and damages my iPad

    Help this smart cover scratches and damages my iPad 2
    It started out fine when I got it but after a while it got dirty and well u know the rest

    Agreement with skyupi. To clean mine, I just got my hands soapy and rubbed it on both sides. Rinse it off and I'd set it to dry. Cleans real well.

  • Does Anyone Make A Leather iPad mini Smart Cover (Not a Case)

    I'm looking for a leather smart cover for the iPad mini (not a case that also covers the back). Does anyone make one?

    I found a few options by doing a web search for "ipad mini leather smart cover". Whether any would suit you I can't say, but you can look into the available options.
    Regards.

  • IPhone dead after resting on iPad with smart cover

    Last night I set my fully charged iPhone 4s on top of my iPad2 with smart cover and went to bed (both powered on).  This morning my phone was completely dead.  Does this have something to do with the magnets in the iPad/smart cover, or is this just signal interference between the devices?

    Probably neither, just coincidence. Plug in the phone to the wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears.

  • Ipad 3 smart cover

    Hi. I just ordered the new Ipad 3. Does the Ipad smart cover sold now on the Apple site only fit the Ipad 2?

    Yes, it fits BOTH iPad 2 AND iPad 3.
    http://store.apple.com/us/product/MD306
    Message was edited by: b j t

  • Did iPad 2 Smart cover kill my laptop?

    My MacBook air suddenly died, it cannot start up. One possible explanation is that I held the magnet of the smart cover of the iPad 2 right next to the MacBook air, and thereby corrupted the HDD. Is that possible? My MacBook air is only around half a year old, but it's the previous model with HDD.

    In this university, anything is possible. However, even if your hard drive were corrupted, the entire computer would not be dead. It OS also highly unlikely that the tiny magnets in the smart cover could do any damage, there was another thread about this isse from a hypothetical perspective a month or so back, you might want to do a search for it. A number of people posting had a great deal of technical expertise.
    Meanwhile, you should make an appointment at the nearest Apple store and have the, give you a definitive answer,
    Best of luck.

  • IPad 2 - Smart Cover =Polyurethane vs. Leather

    Finally, got my White iPad 2 last week, the thing is all smart covers were sold out at that time, however they're back in stock now. So i was trying to figure out which is one better, in terms of durability, quality. Also which color goes best with the white ipad.
    - Thanks guys.

    HI, I PURCHASED THE IPAD 2 ABOUT THREE WEEKS AGO, AND OF COURSE THE PINK SMART COVER.
    I  LOOOVVVEEE IT! THE COLOR IS "VERY COOL" (LIKE STEVE WOULD HAVE SAID)!
    SO FAR IT HASN'T GOT DIRTY AND IT HASN'T BLEED EITHER.  I TAKE IT EVERYWHERE AND MY FOUR KIDS PLAY WITH IT CONSTANTLY.  I ALSO HAVE THE ORIGINAL IPAD WITH THE APPLE COVER THAT CAME FOR THAT MODEL.  THAT COVER STAINED THE INVISIBLE SHIELD SCREEN SKIN. 
    ONE OF THE THINGS THAT MOTIVATED ME TO BUY THE SECOND EDITION IPAD WAS THE VERSATILITY OF MANY COLOR COVERS.  MY PLAN IS TO BUY TWO OR THREE MORE.  EACH TIME I SEE AN IPAD 2 WITH DIFFERENT COVERS, SEEMS THAT IS A NEW ONE.

Maybe you are looking for

  • Portal runtime error while selecting page layout in WPC editor

    Hello, in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup. The logfile shows the following : #1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap

  • Clamshell mode issue when waking from sleep

    Just got an rMBP and hooked it up to a ViewSonic monitor via DVI-thunderbolt to use in clamshell/desktop mode in my home office. All good – except that whenever I wake the MBP from sleep, the ViewSonic just shows snow for about 30 secs to 1 min befor

  • Parent-Child-Grandchild report

    Hi, I am trying to create a Parent-Child-Grandchild report, grouping on a value in the Child record set. The scenario that I have encountered is that there may be legitimate dupes in the child record set and if I put a grouping on the child record se

  • Source system settings DB Connect

    trying to change the IP settings for source system get message :Source system default settings are maximun values; input adjusted.. Source system is DB connect, any idea how can change settings? It is correctly in BW : sbiw and spro set to correct le

  • Help with scanned photo in layers

    I am using Elements 9 trial, and my questions involves scanned photos.  I understand that the layers do not show in a scanned photo, and so I would like to know if there is a way to save the photos in Elements 9 so the layers can show.  What I want t