Ipad 2 still crashes after restoring to factory setting after upgrade to IOS 7.0.6
After recent upgrade to IOS 7.0.6, my ipad 2 started playing up. Lost the use of camera like many others. Followed advice to restore to factory setting after connecting to Itunes. Took several attempts to do so as it wasn't able to locate my ipad in itunes and kept saying it couldn't find my iphone? Not sure why it was looking for iphone. Anyway, I disconnected and turned off the ipad holding on to the Sleep button and home together and left it off overnight. Next morning, I found I could turn my ipad on. Feeling relieved, I started to input my details, etc, and in the middle of doing so, it just went blank and the apple logo came on. It kept going off and coming back again. I just turned it off again using the sleep and home button together and left it for a day. The next day I was able to get into my home screen but after using it to log into my emails, etc, it just went off with the apple logo appearing again. I really regretted upgrading to IOS 7.0.6. Nothing works properly anymore, ie my camera, the sleep button..... Wish I could restore back the older version. Is there any hope/cure for my sick ipad? Hate to spend lots of money on repair. Please help..
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.
Similar Messages
-
IPAD not coming up after restoring to factory setting
after a succesful trial on a colleagues itune pending upgrade of mine to the latest version, we successfully set up mi nenly acquired IPAD but later restore to factory setting when we discovered it was 'not charging'. Unfortunately, my IPAD has not been coming up after my upgrade (it is not even seeing itune anymore)- not even on anybody else's system. Can you please offer any help.
Thank you in anticipation of your prompt suggestion or resolutioni had a scare tonight as IMAME4all is out i thought id try to have a look and my ipad wouldnt restore in itunes i tried three times and on the last as it was trying to wait for ipad i noticed that home sharing was on in itunes i turned of off in the menu and bang it bleww up .... / no not really but it started restoring and all good for normal pad.
-
I can not reactivate my iphone 4 after restore from factory setting
I could not reactivate my iphone 4 after restore factory setting!
Why not? Please provide more information. Your question is akin to saying: "My car won't start."
-
Iphone 5s stuck at activation screen after restoring to factory setting
I had deleted my Apple ID and created one same Apple ID again. After i restored my iphone to factory setting, it stuck at the activation screen, even if i filled in the correct Apple ID and password, it shows "cannot use this Apple ID to unock this phone'. Seek for help.
You need the AppleID and passcode used to originally activate the iPhone.
This is a new security feature in iOS7 called Activation Lock. There is no
workaround.
Without the AppleID and passcode used to activate the iPhone, it will be useless
to you and everyone else.
If it is only the passcode that you forgot, try here:
how to reset password:
https://iforgot.apple.com/password/verify/appleid -
First time user on this forum, so I appreciate any help from anyone. I load up some 80-90 gigs of video to download and it takes in maybe 200 mb and says 'IPod Sync is Complete" I've restored the factory settings, tried doing it manually and nothing works. It will add to my iPhone, so I'm guessing the problem is with the device.
Sorry, Bilbo...I have the latest version (2.0.4) and have over 140 g. free space. Even movies that were on there early but have been deleted cannot be re-added to the iPod. I have followed the instructions in that link, both automatic and manual and nothing seems to do the trick. It initially acknowledges that there are some scores and scores of movies to download, showing on the spacebar that it anticipates some 90 gigs need to be synced. But then it says 'sync completed', lays down the shovel and calls it a day.
Any ideas outside the given solutions? -
I accidentally restored BF's phone back this latest back-up which was March 2013... Some of his data were saved on iCloud but not everything. I don't understand why it only picked certain things to store in iCloud and not everything! For exmaple, few photos were saved on his Photostream album on his phone. Photos taken in the last two weeks were saved but not before that to March 2013. So I'm looking for a way to retrieve data directly from the iphone and not through ITUNES. Please let me know if there's hope!
Photostream only keeps photos for the last 30 days. Resign yourself to the fact that the rest of them are gone.
-
Help! Z61t - restore to factory setting problem
I tried to restore my Z61t to factory setting.
I did it from the thinkvantage > rescue & recovery > restore to factory setting
after that the laptop restarted by it shelf.
when it started, It asked me to put in the Recovery suplemental CD.
I put in my CD recovery which was I created my chelf after I bought this laptop two years ago.
but, it said 'wrong CD'.
so, click cancel. and the laptop restarted by it shelf again.
and keep asking me to put in the CD Recovery.
Should I buy this CD recovery from IBM?
and I am still wondering, if after I buy the CD. the restoring still not working.
anyone can help or give me advice for this matter?
many thanks!@ denny_chr,
If you are booting using the blue Access IBM / ThinkVantage button you need to select to restore your system and then select factory restore. Do not select to restore from an image, the disc you created will not work.
Using Discs
Hopefully you created more than one disc; you should have created at least two, maybe three? Boot from the first disc, when it asks for the supplemental disc you need to click on "no", (otherwise you will get the wrong disc message), it will then ask for the first recovery disc; this is when you need to insert the second disc you made.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
My iphone 4 screen black out suddently! I tried to restore to factory setting but still nothing show up on screen! Anyone can help?
1st, u could just restart ur home, pressing the home and power botton together for few sec,if it wont work .....
2nd, try restore ur phone with itune, and it ****** me off last time when i dont normally backup with my itune after the icould thing showup, so restore with icloud backup wont 100% work, if not just try restore from older icloud backup. if it still wont work.....
3rd hand it over the the apple dealer... they are the pro... never ever open it up urself or bring it to one of ur so call SMART FRIENDS, they will freak up ur phone even worst.... i think this method will definately solve ur problem.. -
my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start
Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.
-
Phone will NOT turn on after synching & updating (or trying) to ios 6. ? ..... Is it REQUIRED to "restore" to factory setting? When researching, I read that you will get an option to restore from back up. I am not receiving any options on iTunes.... restore only & basically it is telling me I will lose everything.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?
If you didn't back it up, your data is gone. There is no "solution" after the fact.
-
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
Help please with restoring iphone factory setting
hey can someone help me please? i did "restore" to factory setting on itunes for my i phone and now after it reboot it has the icon of usb and itunes icon on screen and the only other option it lets me do is emergency call, what do i do?
Connect your iPhone to iTunes and perform the restore again. DO NOT unplug it until it is completely done and it's on.
If iTunes cannot recognize the iPhone, force your iPhone into recovery mode and try to do the restore from there. To do this, turn it off. then, press and hold the home button. Keeping it held, plug your iPhone into iTunes via the USB cable. Keep holding down the home button until the screen showing a USB cable and an iTunes icon. Then, iTunes will recognize your iPhone, and you can do a restore.
Again, do not unplug your iPhone until iTunes says it's done restoring. It will reboot your iPhone a couple of times before it's done. -
I've update my iPad to iSO6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory stting & all media & data will be ereased. I DOT NOT WANT THIS TO HAPPEN. What can I do?
You have no choice now. Unless you want a brick for an iPad. After you restore to factory settings you can restore from your backup ..... And you do backup don't you? I would never update the iOS software without backing up first. After you restore from the backup, sync with iTunes again and you should be OK. Assuming that you do sync with iTunes .....
Read this for info on how to restore from the backup.
http://support.apple.com/kb/ht1766 -
Laptop HP Pavilion dv4 after Restore to Factory Defaullt then not restart to windows, no error msg
Dear All,
I am using HP Laptop HP Pavilion dv4-1135ee,
Laptop for last more than 5-years is working, but now quite slow
So I went for Factroy restore, search in google for this help, found one easier way to restore is go to "my computer" right click, then select 'manage|", then to "disk managment" and make active "restore backup partition" and then restart the laptop.
Now Restore start automatically, without pressing F11-Key, I click yes for "Factory restore", continue next, twice laptop restart, then now again ragain laptop keep on restarting and show "windows Booting File", then one popup " Xwindows|systen32|cmd.exe - Startnet.cmd, then automatically popup close and Laptop restart, their is no error msg or failure.
How to resolve this problem
Thanks
SAEED
after Restore to Factory Defaullt , then not restart to windows and no error msgEnter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive and memory.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Maybe you are looking for
-
Bonjour + Fast User switching = messages going to the wrong (inactive) user
We use iChat for Bonjour in our office– fast file transfers etc. If a user is one of 2 or more logged in on a machine– through the use of fast user switching, we've noticed that incoming messages (initiated by another user on the network) will often
-
Hi, Is there a way to maintain Account Teams, add/update/delete members, using Web Services? When I download the Account WSDL I see the Account Team property/datatype and believe I can populate the list with an Account Query - I am already pulling a
-
HI Since the SCOM was Upgrade to R2 Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation This arrives always around 7:20AM, someday is at 7:19, other at 7:21.
-
New itunes does not recognize outlook calendars?
New iTunes update does not "see" my Outlook calendars, so will not synch. The Contacts work fine. This is true for both my iphone 4s and Ipad.....my iPhone has been upgraded to IOS7, the iPad has not, so seems to be an itunes issue.
-
Search option in masthead design
Hi all. How can we place the toolarea search option in masthead design so that the search option works well ? I want to place this in place of branding image.