Ipad 2 stopped working after recent update

I downloaded the latest IOS update yesterday and today my ipad 2 won't even turn on.
My ipad worked fine last night. I am wondering if my ipad is now toast?
Any assistance would be greatly appreciated.

I did what you suggested and after the apple icon, I get the iTunes icon with a plug in cord.
After plugging in, a box pops up in itunes indicating it has detected an ipad in recovery mode and it says it can not connect with itunes until restored. I have attempted to restore via itune but the next pop up box say "this device is not eligible for the requested build."
When I hit "more information" I am told to update my itunes to the latest which results in my having to download iOS 7.0.4 on my macbook pro.
Am I at a stand still because I won't download 7.0.4 on my macbook pro?

Similar Messages

  • Volume control and video stopped working after recent update

    I am having two problems that started at the same time. First, I cannot control the volume. When I hit the volume control buttons the volume display comes up but with a circle with a line through it. I checked the sound in Preferences and it showed no outputs, not even the internal speakers. I do still get the tone at startup but nothing else will play sound. Second, I can't seem to play videos from any online source (i.e. YouTube, Hulu, etc). Any attempts to do so lock up my browsers (both Safari and Firefox). I can play iTunes videos, but there is still no sound. I've only had the computer a couple of months and haven't recently installed anything new on it. My computer did download 3 updates earlier today though I don't remember checking what they were. Any help anyone can give me would be most appreciated.

    I did what you suggested and after the apple icon, I get the iTunes icon with a plug in cord.
    After plugging in, a box pops up in itunes indicating it has detected an ipad in recovery mode and it says it can not connect with itunes until restored. I have attempted to restore via itune but the next pop up box say "this device is not eligible for the requested build."
    When I hit "more information" I am told to update my itunes to the latest which results in my having to download iOS 7.0.4 on my macbook pro.
    Am I at a stand still because I won't download 7.0.4 on my macbook pro?

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

  • My wifi stopped working after a update last year and I have updated since, can this be fixe

    MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

  • BoardMaker plus 6 stopped working after OS update

    My Boardmaker Plus stopped working after I update my system to OSi Yosemite.  The disk just spins and spins and the program does not come up?  Is anyone else having this problem?  How can I fix it.  I need to use the program for work.

    I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

  • I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

    i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

    Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

  • N95 Map stop working after firmware update

    I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
    Need help please.

    have u tried reinstalling the maps application?
    u can get the latest maps application update from http://www.nokia.com/maps
    download the application associated with ur n95 and install it using the pc suite application
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

  • HT4650 My keyboard has stopped working after an update of Flash Player.  Help! What can I do?

    Why has my keyboard stopped working after Flash Player update?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do things work in Safe Mode?

  • Media Key stop working after firmware update on 55...

    The media key was working before the upgrade.  After I upgraded the firmware, it stopped working.
    My phone info:
    5530
    software version: v 11.0.054
    customer version: 11.0.054.207.02
    language set:25
    Type: rm-504 
    latest update: 10/21/2009 

    "The media key was working before the upgrade.  After I upgraded the firmware, it stopped working.
    My phone info:
    5530
    software version: v 11.0.054
    customer version: 11.0.054.207.02
    language set:25
    Type: rm-504 
    latest update: 10/21/2009" 
    Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working.  Am I missing some updates? Nokia Software Update checker says theres is no update yet.
    Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
    Nokia 5530 Xpress Music
    v11.0.054
    "How We Respond Is Who We Are..."

  • Pm-utils stopped working after recent upgrade. [Solved]

    Hi. After a recent upgrade my system, the pm-utils package stopped working. I can run pm-suspend and hibernate but nothing happens at all. Just a blank terminal screen appears. Were there any changes to the kernel that might have changed how it worked? It used to work fine before recently.
    Last edited by semperfiguy (2008-10-21 21:56:13)

    The update to the kernel made the package I was using for the ath_pci module not work. I had a hook in the suspend that would rmmod and modprobe that module. With the new upgrade I use the ath5k module now. So I just changed the file /etc/pm/sleep.d/12mod-ath_pci to reflect that change and it works great now. Thank You.

  • Mouse gesturing no longer works after recent update ?

    Recently, after an update my magic mouse no longer functions using the swipe gestures...Anyone else with this issue?
    tried to look at in in preferences bt no options there.

    Helpful link from 95bulls.  Here is the Apple link which deals with the more general problems one can have with an unresponding Mouse.   Is the green power light working or blinking?
    You don't say which update or give any details of the OS you use.    Please try to find a moment to update your profile.

  • Acrobat XI Stopped working after CC Updates

    RANT: It's happened 3 times now, and I'm getting fed up of the Adobe support - very disappointing. I don't think they know how to handle issues, and sometimes wonder if they even know the basic difference between hold and disconnect. Numerous times I have contacted them, after chatting with them for a few minutes, they say that they have to trasnfer me to the technical support, and then I get disconnected. Then the next guy has to start all over again with the same questions. Horrible.
    Ok, rant is over (for now), hopefully this forum is more helpful.
    ISSUE: last few (3) times I have noticed that when I update my Creatve Cloud panel, my Acrobat stops working. I'm not entirely sure if this is related to the CC panel update, but that's what it seems to me right now. So, after numerous chats with the Adobe chats, and my own office IT, I (myself) figured out that the issue could've been because I see 2 Adobe Acrobats installed on my system. The screen cap below shows what I mean.
    Last 2 times I uninstalled both, and reinstalled the Acrobat from the CC panel again, and it worked. But this time it just dind't. And I've been totally unable to solve the issue with my IT and Adobe's support so far.
    So, what happens is that when I launch Acrobat, it asks for licensing information again, or it says it would launch as a trail version... Come on, I'm already paying for the whole package.
    Desparely hoping that the Adobe Forum Community is more capable for such support...

    I've had numerous chats with Adobe support agents, and with my own IT, and haven't had luck yet. It's been a terrible experience stuck between the two IT support departments as a user I'm the one who's suffering and not these support guys...
    The issue here is that my Acrobat is not working as it can't find the internet connection, even though all the other Adobe products in the Creative Cloud work fine.
    We use Proxy scrypts in my office, and even though all Adobe links provided to me by Adobe, have been white-listed by my IT, Acrobat still hasn't worked.
    I've tried it all, installing, uninstalling, Adobe clean-ups, registery edits, preferential boots etc etc. Still no solution.
    Is there no way to manually enter a serial number to get it working???? What if someone loses internet connection, does it mean the Adobe Creative Cloud products are useless in that scenario, even though one has paid for months...
    Damn, I'm angry with myself for pushing for Adobe CC upgrade. Sigh.

  • Lightening to HDMI not working after recent update

    I recently updated my Ipad and now my Lightening to HDMI adapter does not seem to work.  It was working fine up until the most recent update.   I know that the HDMI cable works and all the other connections are fine b/c it works fine when plugged into our blu-ray player. 
    Has anyone else had this problem, or does anyone know how to fix this issue?

    What recent update?  The last Epson R220 update for non intel Macs was 08/19/10:  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654 761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=13
    What happens when you click on the EPSON Printer Utility which should be inside the Utility folder?  Have you tried repairing permissions and restarting your computer?  Have you read Epson's user manual and/or contacted their tech support?
    I also have the R220 model.  Besides using their drivers, I also use the Gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php

Maybe you are looking for