IPad 2 suddenly won't work.

I was updating some apps, but when the apps wouldn't load, I tried to restart. Now I only get the Apple logo. I've tried restarting and restoring with no luck. Please help me!

Force your iPad into Recovery Mode.
http://support.apple.com/kb/ht1808

Similar Messages

  • What is wrong with Facetime? Suddenly won't work on iPhone 4S or iPad mini. Connecting to ither iPhone 4S. Tried 4G

    What is wrong with Facetime? Suddenly won't work on iPhone 4S or iPad mini. Connecting to ither iPhone 4S. Tried 4G & wifi. 4 bars. What gives? Says connecting... & then times out.

    Sometimes, in a givin market, FaceTime is not available. 

  • My iphone 4 'phone app' suddenly won't work

    My iphone 4 'phone app' suddenly won't work. It's not a microphone or other hardware problem because I can use viber normally. I have already upgraded to iOs 6.1.2 from a 5.1 (when the problem started), and even after the restore it still won't work.

    This is asked and answered multiple times daily.
    If you've tried a restart, reset, restore from backup, restore as new as recommended in the User Guide and this fails to solve your problem, then you have a hardware failure and will need to bring your phone into Apple for replacement.

  • My outgoing email suddenly won't work from iMac, but still works from iPad...any ideas?

    I'm not sure what happened, but suddenly I can't send any email out from my iMac.  It still receives mail.  And my iPad's email is working just fine both incoming and outgoing.  Any suggestions???

    did you find the answer as I have the same problem? Thanks

  • My iPad screen won't work

    I have an iPad 2 and recently it has stopped working all of a sudden. When i press the power button on my iPad, it turns on but it is just a blank screen and when i turn it off it flashes white. Sometimes when i turn it on my wallpaper flashes on the screen for a split second but goes right back to the blank screen so i know that the screen isn't broken. I have tried charging it, holding down the power button to shut it down completely and I've tried holding down both the power button and the home button, nothing works. When i try to sync it to iTunes it asks me to type my passcode in on the iPad but i can't because it won't work.
    Any ideas?

    Hello Nathan_J_M,
    Thank you for choosing Apple Support Communities. i am very pleased to help you.
    Reset to factory settings via recovery mode
    So, what you'll have to do is enter recovery mode and fully reset your iPad. Yes, you will lose all your data, but it's better than buying an iPad and wasting a hog lots of money pit. If you have a backup, it will be great.
    Entering recovery mode:
    Force your iPad to shut down. Press and hold on both power button and home button at the same time until your iPad turns off. Now, follow my steps:
    •1: Get your PC/Mac ready
    •2: On that PC/Mac, make sure you have the latest version of iTunes
    •3: Connect the large end of the charger in the computer, but not the small end. (Connect this end to the computer:)
    •4: Open iTunes on your PC/Mac
    •5: Now that you're on iTunes, get the small side of the cable (the one to connect to the iPad with) and get ready
    •6: Press the home button on your iPad, while your pressing the home button, plug in the other small part of the iPad quickly to your iPad. Keep pressing the home button to your iPad until you see this:
    You are now in recovery mode. Restore your iDevice to factory settings. If you have a backup, restore your iPad from that backup or you'll lose everything on that device. Sadly, if you don't have a backup, everything will be gone, that includes photos, apps, contacts, etc.
    for more information on how to enter recovery mode on your iPad, go here: If you can't update or restore your iOS device
    Regards,
    Ab

  • My iPad 2 won't work as good as the old one?

    I had a broken screen on my old ipad 2 and I went to Apple and they   give me anotherone, howeve My new iPad 2 won't connect to my home wifi most of the time? I have hard time to open any of my app like pbs kids! Sometimes my app work but the sound is not there, and it keep doning this most of the time. The biggest problem I have most of the time the screen disappears and I get the apple sign?

    I'd take it back to the apple store and have them test it. maybe they can help or prove that it's a lemon and get you another

  • ITunes search function suddenly won't work, pending iTunes upgrade.

    I have an old (2002) 16-bit PC, which won't support an iTunes upgrade. I've tried to upgrade (from 7.1) before, but it crashed the machine (and I lost ALL my music), so I've stayed with 7.1 and until now everything -- including the iTunes store and the search function -- has worked just fine.  But suddenly, when I go to the iTunes store to buy new music, it presents an "Upgrade to iTunes 10" screen, and the search function won't work at all.  I'm locked out until I upgrade, but I can't upgrade.  Help?

    Your QT may work fine but is it the most current v7.1.3? This is not to say that this will resolve your problem. You might try to d/l the 10.4.6 combo update and reinstall the upgrade to the system. That might resolve the problem.
    I would wait until the new year and then upgrade to iLife07. No sense in buying 06 if 07 is around the corner.
    You can downgrade to an earlier version of an app. To downgrade iTunes you would need to remove the receipt from HD>Library>Receipts>iTunesX.pkg. You will also need the .dmg of the version you want to reinstall. Old iTune versions are avalable at http://www.oldapps.com/downloadiTunesmac.php
    You can get old iPhoto at http://www.oldapps.com/iPhoto.php - instructions here http://www.oldapps.com/forum/showthread.php?p=545
    To downgrade your OS you will need to reload the original OS from the system disks that you have then upgrade to the level that you want.
    As always b/u before proceeding.
    MJ

  • Brand new macbook air charger suddenly won't work

    I bought a new macbook about four weeks ago. Everything is in great shape, inlcuding the charger. It suddenly didn't work yesterday. I've tried some of the troubleshooting stuff, nothing is working. Any ideas?

    Failure to wake from sleep is not normal regardless of the Energy Saver settings.
    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • 3rd party apps suddenly won't work

    This happened to me before but it was a long time ago and I don't remember what the fix was. Suddenly all my 3rd party apps refuse to run. They come up for a second then quit. I tried a hard reset but no luck. Anybody got any ideas. I'm still on OS 3.1

    I installed an update for one of my apps from the app store and suddenly everything's working again.

  • Jbuilder suddenly won't work

    Hello,
    After using Jbuilder X Foundation happily for several weeks it suddenly refused to work this afternoon. The problem seems to be that it can no longer open/display files. When launched from the command prompt, a number of NullPointerExeptions occur. These are in the form
    "Null pointerExeption at com.borland.primetime......"
    I haven't listed the whole thing as I've already searched pretty hard on the www, and this string seems not to appear any where obvious. (or not obvious as it goes)
    Initially I thought it was something silly that I did, and have tried pretty much everything I can think of. New install of both JBXF and the SDK from sun, even update install of Windows. But no, what to do?
    If anyone here has experience of this or ideally a sollution, I'd be greatfull.
    Yours kindly (with a classpath intact)
    Adam Green

    Nope, it's not having it...
    Instead, I've switched to JBuilder 9 personal, and it's fine.
    Fingers Crossed
    Adam G

  • Ipod suddenly won't work with an FM transmitter

    I have an iTrip that I used successfully plenty of times with my nano. I haven't used it in a year or so, but now when I plugged it into my ipod, the ipod says "FireWire connections are not supported. To transfer songs, connect the USB cable provided. Press Center to dismiss."
    In the year or so that I didn't use the iTrip, my ipod froze and I had to reset it, so I don't know if that has anything to do with it.
    Anyone know why I'm getting that message now saying my iTrip won't work, when it did before? Thanks much!

    If that doesn't work try this it just worked for me as i was having the same issue.
    1) Plug the Nano into the airplay and tune to the station
    2) When everything is set up, reset the Nano (hold down Menu and Select at the same time until it reboots)
    3) enjoy the music

  • Nano Suddenly Won't Work.

    My iPod Nano (7th gen.) won't connect to iTunes anymore. I just started having this problem last week. A message pops up saying that an unrecognized iPod has been found. Please unplug it and plug back in. If it continues, to uninstall iTunes and reinstall. I did all that, and it still continued. So I searched on here for some other things and found to do something in my control panel. I tried that and it still won't work. I've added new music and like to use my iPod everywhere. The only way to listen to the newer music is by my laptop now. Also was wondering if it had anything to do with the Windows 8.1 update? Because it wasn't synced to my laptop since January. I tried last week (which was soon after my laptop had updated 8.1) and then it did this? Is it not supported or what? Please help!!!

    You might need to restart the Apple Mobile Device Service, as described in ituem #3 at the bottom of this article: http://support.apple.com/kb/TS1538.  If that doesn't resolve it, try uninstalling iTunes and all of its components as by following this guide exactly: http://support.apple.com/kb/HT1923, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • AirPrint suddenly won't work

    Yesterday morning my HP110a stopped working with airprint. iPad and iPhone 4 with iOS 4.3, having worked fine before, suddenly cannot find the printer on the network. Using Safari, I can access the printer's webpage from the iPad and iPhone, my MacBook Pro finds the printer with Bonjour, ePrinting works fine - but AirPrint doggedly refuses to work.
    I have been through all the troubleshooting points - checked network, checked all software / firmware is up to date, even updated iOS to 4.3.1 to no avail. 
    The need to print from the iPad is urgent - what can I do? 
    This question was solved.
    View Solution.

    On the iPad's Home Screen, tap Settings > General > Reset > Reset Network Settings and reboot the iPad.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • IBook suddenly won't work on battery

    My iBook has suddenly stopped working on its battery.
    Whilst switched off, the battery catch opened and the battery slipped out. I put it back and tightened the catch. From that point on, the computer has refused to start up unless the power adaptor is plugged in.
    The battery indicator bar on the Desktop constantly displays the word "Calculating", but never comes up with a charge time. The battery itself is fully charged, as all the LEDs are lighting up when the battery charge button in depressed. If I take the power lead out when the computer is up and running, the computer shuts down instantly.
    I have tried resetting the Power Management Unit, but it has made no difference.
    Any help would be much appreciated to fix what has been up until now a flawless computer....
    iBook G4   Mac OS X (10.3.9)   512 MB RAM (factory fitted)/Battery replaced under iBook battery replacement scheme

    Hi, Dean. Welcome to Apple Discussions.
    I've been visiting Apple Discussions for over three years now, and every update brings a few people here to say, "The update hosed my battery." It's nearly always just a coincidence. The battery was probably ready to go.
    According to the Washington Post, the typical lifespan of a lithium-ion battery is two to three years (whether it is used or not). Apple warranties the battery for one year.
    The following comes from an old Apple Knowledge Base article regarding an X through the battery icon in PowerBooks. I've adapted it a bit to try it on an iBook. It probably won't help, but it shouldn't hurt to try:
    In some cases, the battery has gone into a deep discharge state. This situation may arise if the battery has been left in the computer for an extended period of time without AC power. The battery can discharge to a point where it is no longer recognized by the PowerBook as evidenced by the red X through the battery icon in the menu bar.
    To help prevent this situation, try these suggestions:
    Recharge the battery when only one of the four green LEDs (Light Emitting Diode) on the battery is on, or shows one green LED blinking.
    If the PowerBook is not going to be used for an extended period of time, fully charge the battery and then remove it from the PowerBook for storage.
    If you have a battery that is not recognized in the menu bar while inserted, the following steps provide sufficient charge to the battery to restore normal operation.
    1. Insert the battery and leave it there for approximately 30 seconds.
    2. After 30 seconds, remove the battery.
    3. Leave the battery out for several seconds then reinsert it for another 30 second interval.
    Depending on the charge level of the battery, you may need to reinsert the battery 10 to 12 times. If this corrects the problem so that the X no longer appears in the menu bar with the battery inserted, allow the battery to fully charge.
    Good luck.

  • Facetime all the sudden won't work to call facetime to Vietnam

    Just this week my facetime calls won't reach vietnam, I changed nothing. I tried on my ipad, macbook air and 2 iphone 5's. It rings and when the other side trys to pick up it just keeps connecting and it times out or when it gets picked up it says facetime failed.

    TThere is an issue with facetime at the moment I guess Apple is working on it.  Be patient

Maybe you are looking for

  • Creating a Region in page extension

    Hi, I am trying to extend an existing page and create a new region in that page with couple of fields. I could create a new flex layout usng personalization but i couldn't find any option to add fields to this region. Any suggestions from anyone? Tha

  • SegregatingTable data into different bucket with equal numebr of

    Hi Guys, I wanted to process table data in chunks not all the rows at a time. How can we achieve this in oracle. Example : I have one table EMP which has ten thousands rows(10,000) rows. Now these ten thousands rows are joined with other tables to pr

  • Multi-Use Item Renderer for DataGrid Column

    I have a dataGrid where the first column of the grid displays an icon for the 'type' of item in the row. I created a custom itemRenderer component which I reference in its own namespace, and everything works great. Since this is a pretty common conce

  • Change language in creative cloud

    I initially installed creative cloud in Danish, but now I've learned that my teacher will be using the english version, so I'd really like to have that one too. Problem is I can't seem to figure out where I change that setting. I've now uninstalled e

  • Error when number of instances reach 113

    we tested sending data to WLI from Enterprise Server. As soon as the # of instances increase to more than 113, the WLI does not send the XML document to Enterprise Server. As soon as we delete the instances from the WLI for that user it starts workin