Ipad 2 temperature error after 10 min of use since updating to ios. 7.1.1

Just like the description says. Ever since I updated to 7.1.1 I get a temperature warning after just a few minutes of using ipad 2. Tried restoring through iTunes several times, no luck. Please help with any advice.

I would DEFINITELY NOT try that. The sensor may be faulty or it may be telling you you could fry your device if you continue to use it.
Take it in for diagnosis (free, repairs are not).
Barry

Similar Messages

What do I do after I got an error after trying to download the security update?

What do I do next when I got an error after trying to download the security update?

Thank you for providing these details. It makes helping you much easier.
You have a 16GB iPad, but have only 2.4GB available. This is likely contributing to the issue. This amount, 15% of the iPad's storage capacity, is the minimum free space you should have. But when updating iOS, you should expect the new version to use somewhat more space than the old. I believe going to Settings > General > Usage and freeing space will help with your issue.
Another recommendation would be to use iTunes on your computer to do the update instead of over-the-air.
I believe either one of these would help you. Both would be at least as good.

Since updating to IOS 8.1 on ipad mini can't download apps. Apps show "waiting." Have reset to new condition with no improvement. Any solution?

Since updating to IOS 8.1 on ipad mini can't download apps from iTunes store. Apps show "waiting." Have reset to new condition with no improvement. Also turned off Wi-Fi and re-connected. Any solution? Thanks,

If you restored your iPad as new, and it still didn't help, I don't know if anything in here will help. in any event, I have posted this boilerplate of suggestions many times in the past and the suggestions in here have worked for others at one time or another. Feel free to give them a try.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first. If you see a downloads tab in the lower right corner, then there is a download in iTunes.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. Reset your router. Unplug it from power for about 30 seconds and then plug it back in again.

I have a 64gb ipad mini that's been updated to iOS 7.0.4. Lately it's been randomely shutting down in the middle of a screen.

I have a 64gb ipad mini that's been updated to iOS 7.0.4. Lately it's been shutting down in the middle of almost any app and the screen goes black and then the apple logo appears as if I've done a hard reset. I've tried both soft and hard resets but with no results. Sometimes thes happens several times in a row. Does anyone have any ideas? I did read discussions and close running apps to make sure there is enough memory. In the past this sort of happened (rarely) and it just left an app and went to the home screen, but this is a total shutdown.

I think you have covered most of everything that you could possibly do at this point other than restoring the iPad iOS software. That's what I would try now. If that doesn't fix it, make an appointment at an Apple Store and ask a genius to evaluate the problem for you.
Use iTunes to restore your iOS device to factory settings

Issues with wifi since updating to iOS 6 on iPad 3.

I'm having wifi issues since updating to iOS 6 on my iPad 3. I can't access certain sites and get error messages such as 'servor can't connect' and 'request timed out.' Although some sites work fine. I can't access apps which require internet such as facebook, iMessenger, face time and games which need internet access. I can't use iTunes or App store and get the message 'can't connect to iTunes try again.' All these problems started after I updated to iOS 6. I found that the iPad works fine at another location on a different wifi but not at home. The home internet is not the issue as laptops, phones and iPad 1 and 2 all work fine on the internet here. I took my iPad to the apple store with no help and no useful advice so came back again and they offered me a hardware swap which I took. I now have the new iPad but the issue still remains. I have tried everything and I have done everything that has been suggested. Some things I have done are reset network settings, reset all settings, changed wifi dns, changed HTTP proxy to auto, closed all apps and re-opened, fully shut down the iPad, turned off the wifi router and restored the iPad several times. I have searched for help and advice and found that there are many complaints about iOS 6 on the iPad 3 when it comes to wifi. What else is there for me to do to fix this problem? I can't use internet or apps that require internet, basically my iPad is of no use at the moment. Do I have to wait for a new software update which will address this problem?

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? How can this problem be solved?

Dear all,
I am new to this community even though I have been a Apple user for years, so please forgive me if this question is not in the right section.
Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? I've always been happy with these two products until the update - now the battery life is considerably shorter which is extremely frustrating.
How can this problem be solved? Is there any way to go back to the previous version?
Thanks for your help.

If you update using iTunes the phone is first wiped clean, then the new OS is installed, and finally the backup is restored. After this finishes if you sync your music should be restored. Music is not in the backup, because it is already on your computer and duplicating it would use up a lot of hard disk space.
An OTA update just patches what has changed; it does not disturb content.

TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

Cannot wake up after screen goes black occasionally since update to maverick

Cannot wake up after screen goes black occasionally since update to maverick. I have to wait a few mintues and press power button to restart. Any one has similar issue?

I've found the problem!!
Mavericks for some reason overheats the GPU.
I downloaded a free 3 day trial of Temperature Gauge Pro http://www.tunabellysoftware.com/tgpro/
It showed a GPU 0 diode temperature of 122 degrres C. I think that's about 250 degrees Farenhiet. Insanely hot. No wonder the poor thing was crapping out. TGP alows fan control and so I set them to maximum and watched the temp come down quickly.
After all these months of frustration it turned out to be a simple fix. So I bought the program for $10. Sure a lot cheaper than having the Apple Experts replace a GPU or CPU like some have sugested.
What I still can't figure out is why Apple won't fix the problem from thier end and just update the fan parameters on Mavericks.

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe

WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?

i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
Did you manage to find a solution? Help please if possible. Regards Az

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

Hi- My Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

Since updating to iOS 6 iPad uses cellular even though I'm on WiFi

Since updating to iOS 6, my iPad uses cellular to down load everything, even though I'm on my home WiFi. It shows that it is connected to my WiF, but, does't use it. As a result, my cellular usage has gone thru the roof. iOS 5.1 did not do that. iOS 5 would automatically switch to my network and work within my network and not cellular. Other than switching off cellular when I'm home, is Apple going to fix this bug or any other suggestions?

Your answer was true with iOS 5.1 however, not with iOS 6. It's the same problem is occurring with iPhone 5. Apparently Apple has issued a patch for iPhone 5 using Verizon's cellular network. My iPad (3) uses Verizon's cellular network.
Not looking to avoid cellular charges but wanting my iPad to switch to WiFi when it's available. For example, at home my WiFi is on ALL the time. The icon showing that WiFi is on and active shows up in the upper left corner (as well as the Verizon icon) however, is still operating on the cellular network. I want the connivence I had with iOS 5. I don't need to be switching manually.

Ipad 2 temperature error after 10 min of use since updating to ios. 7.1.1

Similar Messages

Maybe you are looking for