Ipad 2 touchscreen always move and click by itself

i have problem with my ipad 2
its always move and click by itself on the screen and always typing
how suppose i do?
does it need repair? how much it cost?

Hey There fazamrh,
If the touchscreen on your iPad is unresponsive, try the steps in this article to address the issue:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
https://support.apple.com/en-us/HT201406
Have a good day,
- Judy

Similar Messages

  • When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

    When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

    It looks like the card may be the problem, and your best bet is to try the Card Reader - this will make the card accessible by the Finder and you may be able to drag the pics off to the desktop or, at worst, try recover the pics with an app like MediaRecover
    Regards
    TD

  • Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I have an iPhone 5, IPad and. Mini Ipad. On big my phone and IPad I can " move and scale my pics to save as wallpaper but on my mini IPad I cannot do it. I have tried everything. All the updates have been done. No one seems to be able to help me. I have g

    Please help ! Why can I not " move and scale my pictures as wallpaper on my iPad mini ? I can do it on my ipad and iPhone. No one seems to be able to help. I am not alone in this but nothing is being done to solve this problem. I have googled and there is a lot of discussion on this, many updates have happened , but still I am unable to do it. Very frustrating !

    Do you have the parallax effect (the 3D effect) 'on' (Settings > General > Accessibillity > Reduce Motion 'off') ? If you do then you will either need to create higher resolution versions of your images, or turn that effect 'off'.
    From http://support.apple.com/kb/HT5595 :
    When the parallax effect is on, you may notice the following:
    Wallpaper, icons, and alerts shift slightly as you move your phone.
    When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
    If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images.

  • I need an iPad browser runs .mov and flash files

    I am looking for an iPad web browser that can run .mov and flash files.

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    A sample of Apps that can display some Flash content:
      1. Puffin
      2. SkyFire
      3. Photon Flash
      4. Browse2Go
      5. Swifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

  • My iPad keeps turning on and off by itself

    Hi! My iPad just keeps turning on and off by itself. I tried turning it off "ON MY OWN" and turning it back on but it keeps returning to the issue. Is there anyone that can help with my issue? I have the "iPad Mini" . There are some times where it will just stop and next thing you know, I go to a app and it returns to the issue :( . ( BY THE WAY, I did update the iPad to the  final  update , but it still continues to turn on and off by itself WITHOUT me even touching it. What should I do????

    Restore the iPad completely (this is a fresh install of the iOS not just an update).
    1) Backup your iPad. http://support.apple.com/kb/ht1766
    2) Restore the iOS via iTunes. http://support.apple.com/kb/ht1414
    3) Restore from your Backup created in step 1. http://support.apple.com/kb/ht1766

  • Automator Help With Mouse Movement and Click

    Hi all, thanks in advance for any help you can give me.
    I'm trying to use Automator to go into my Volume Purchasing Program purchase history (in Chrome) and download each redemption code spreadsheet. I will need the automator script to scroll to the bottom of the page and click 'More Purchases', wait for the page to load, and repeat that many many times. (I have a lot of purchases on my account.) Then I would like to write a second script that I will run after all of the purchases are shown that will click 'Download Codes' for each line. I've done this by hand for over 2 hours now and still have a long ways to go. Figured Automator could help me out.
    Any tips on how to accomplish this? I've tried recording my actions but when I play it back, it won't even switch to Chrome.

    I have not found automator to be very good at doing this kind of thing.
    It is theoretically possible to have applescripts imbedded in Automator that will choose from a dropdown menu, but I have also not found that to be too reliable.
    I have had much better luck with Startly - QuicKeys 4 for Mac OS X

  • Screen 'casing' moves and clicks

    Hi, my 2 year old Powerbook G4 15" has developed some movement between the part that is the hinge and the actual screen casing at the right angle where they join. Also, at the actual hinge point where the screen meets and pivots at the case, only on the right hand side, it clicks quite loudly and moves about 5mm up and down when i changve the angleof the screen. (sorry if the description is a bit off)
    Any one else had this problem or know how i can fix this, by tightening some screw or other or do i need to take it to a store? I live in a fairly out of the way ski resort so im hoping this isnt the solution.
    Thanks

    I just acquired this "new" 15-inch PowerBook that I'm typing from, on eBay, and in searching this forum, I found this thread which addresses my issue. Is it the same as yours?:
    http://discussions.apple.com/thread.jspa?threadID=772880
    I'm normally on the 12-inch PowerBook forum, but have migrated over here for help (I'm usually the one giving it) to find out things about my "new" notebook. Though I still have my ultra-portable, the 12-inch one.

  • Need example vi for simulating mouse movements and clicks

    I need an example vi that allows me to set the cursor position and simulate mouse left and right clicks, including double clicks. The examples in the development library work up to LabVIEW version 6, but not for version 7, because no block diagrams were included. Thanks.

    Hello �
    Take a look at this example program at NI Developer Zone. It will allow you set the position of the mouse cursor.
    Hope this helps!
    S Vences
    Applications Engineer
    National Instruments

  • Why my iPad Air always restarts and the apps close!?

    When I'm using Safari somehow it closes itself, it happens me minimum once a day. And sometimes it happen to me that I am using it normally and suddenly the apple logo appears and it restarts. This is kind of frustrating to me what can I do, who can I call?

    Hello Alfonsocastillo,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
    Have a nice day,
    Mario

  • Firfox consumes lots of CPU. Hard drive is always spinning and clicking w firefox. RUNS SLOW.

    Firefox is pretty much unusable early in a session. Gets better aftyer a while,say 10 minutes.

    I too have a similar problem except I think mine is flash related. It's fine when just surfing and watching news/videos but when I play a flash game the hard drive starts spinning constantly and it takes minutes to switch applications or shut the game down. This usually happens at the beginning of a flash game, settles down for a while, and after 45-60 minutes it starts up again but the hard drive keeps spinning for another 15-30 minutes then settles down again for an even shorter amount of time and then repeats the cycle. It started doing this to me in firefox 6, but I've since upgraded to 7.0.1 and flash is up to date. I've run all the malware/virus checks, tested the drive, but can not find anything wrong. If I manage to get the resource monitor running, firefox plugin container usually is reading my pagefile.sys at 40-50 million bytes/min, plus a few more firefox entries running in the low millions/min. I know flash is a memory pig but I have 2 gig memory plus the virtual memory which I tried a couple of custom settings and then set back to default, with no change in performance

  • I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so.  My understanding is that you can click on the phots that you want to move and drag it to a new loca

    I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so.  My understanding is that you can click on the phots that you want to move and drag it to a new location within the same album.  After i select the photo that I want to move and click on the photo, I get a cirlcle with a diagonal throught it and am unable to drag the photo to its new location.  What am I doing wrong?  I know this should be a simple thing to do.  Thanks

    Jimmy RG
    In the Elements Organizer 13
    The key to all this is to click on/select/highlight the Album that you have created in Local Albums.
    Then make sure that the Sort By: (in the row below the highlighted "Media" header is set for Album Order.
    You should see a number at the top left of each of thumbnails.
    Then, click on the thumbnail that you want to move, hold down the click, and drag the thumbnail to the wanted new location
    in the line up of thumbnails.
    Often I had to press down hard on the drag.
    Please let us know if that worked for you.
    Also, in Edit Menu/Preferences/Keyword Tags and Albums/Enable Manual Sorting Options, I set all for manual.
    ATR

  • Touchpad moving and clicking without me

    Hi I NEED HELP QUICK. I PURCHASED A HP Envy m6-n012dx ABOUT 2 MONTHS AGO AND I AM HAVING MAJOR ISSUES WITH THE TOUCH PAD. AFTER USING FOR 20 MINUTES OR SO THE POINTER STARTS TO MOVE AND CLICK WITHOUT ME TOUCHING THE PAD. THE PAD STICKS AND @ TIME BECOME UNRESPONSIVE. I'VE ALREADY REMOVED AND RE-ADDED SYNAPTIC DRIVERS FROM HP SITE. NOT RESOLVED.
    PLEASE HELP! FEEL LIKE I'VE WASTED A LOT OF MONEY ON THIS PURCHASE.

    Hi Tomsconi,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY m6-n012dx Notebook and having issues with the Touchpad and Touchscreen. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities. Here is a link to The HP Support Assistant. The HP Support Assistant will help with the drivers and software that are on your machine now. Here is a document on an update download for Windows 8.1 that might help. It is a recommended update for Touchpad issues.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Capture border, mouse movements and screen area showing incorrectly

    I'm using Captivate4 on Win7 Pro 32bit to record a web demonstration on IE8. Setting the capture area only records a portion of the selected area, and portions outside (and including) the red boundary line. Mouse movements and clicks are also off. I've disabled hardware acceleration and tried a few different screen resolutions.
    This occurs in every recording mode and in every capture arrangement - application, predefined, or custom size. Full screen recording captures the correct area, but the slides are very large and cursor actions are still off. The border disappears when Hide is checked, but the area captured is still completely different from the area selected.
    I've included screenshots of both the capture area selected and the actual area recorded.
    If anyone can help, I'd really appreciate it - thanks in advance!
    Area selected for recording:
    Area captured during recording - cursor out of place, overlap on the left, missing area on right and bottom:

    Change your computer screen resolution to match what you set in Captivate, and you will capture everything.
    I had to change mine from 1920x1080 (on a 13" laptop) to 1280x720 which is the maximum in Captivate. As soon as I did that, the entire screen was captured as intended.

  • IPad stopped showing movies

    Hello,
    My first iPad stopped launching Movies, and it was never updated. How do I fix it?

    Hi luthien,
    Hook up your device to iTunes on the computer you sync with and update your IOS software. Then tfry a re-sync. That should clear things up.
    If it does not, you may need to download the most current versions of iTunes and re-sync again.
    If you can't find your movie after that, or have further troubles, post back!
    Cheers,
    GB

Maybe you are looking for