IPad 2 turns on then after a few seconds the screen goes black
IiPad 2 turns on then after a few seconds the screen goes black.
Hi Tsinker,
I'm sorry to hear you are having issues with your iPad. If your iPad isn't responding or starting up successfully, you may find the troubleshooting steps outlined in the following article helpful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden
Similar Messages
-
When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??
One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?
-
The screen on my ipod nano, 2nd generation, turns black. It stills plays music. I've tried resetting the ipod to clear the black and the screen goes back to it's original state. But after a few minutes the screen turns black again, while the music is still playing. What can I do about this?
That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock -
I came out to a black computer screen. I can see the mouse arrow but otherwise nothing. I disconnected the computer and tried turning it back on. It starts up like usual but bar going across under the apple freezes and the screen goes black. I can hear the computer running. Help!
That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock -
TS3533 if my imac is left unused for a few mins the screen goes black and is unresponsive
if my imac is left unused for a few mins, the screen goes black and is unresponsive
In addition check your Energy Saver Preferences and make sure that your Display Sleep and Computer Sleep timers are properly set to get the expected results.
For example: I want my Display to sleep after 5 min and my Computer to Never Sleep so that I can choose when to sleep it from the Apple dropdown menu. -
Everytime i go to download an App from my Ipod Touch, the app begins to download with the words, "Waiting" underneath it.
....after a few seconds....the App DISAPPEARS!...i've tried turning it on and off, reseting billing information, going to downloads to resume but the app isn't even in the downloads section...I NEED HELP! I WANT TO PLAY TETRIS!!!https://iforgot.apple.com/appleid
If you forgot your Apple ID password - Apple Support
Contact Apple for help with Apple ID account security
https://ssl.apple.com/emea/support/itunes/contact.html -
After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....
Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.
-
Hello,
My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
Jelle van Blokland.Hi Jelle van Blokland,
Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari -
my iphone 4 died even though it had plenty of battery, and shows no sign of life until i put it on to charge where it shows the apple sign every now and then but just turns off again after a few seconds.....HELP!!!!
Could be a defective battery, you should get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
Find an Apple Authorized Service Provider -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
When I first plug in my power cord it lights up green and then after a few seconds changes to red. What does this mean and how do I fix it?
Apple systems in MBP have self-maintaining charging systems. If the battery is less than 95%, the charger light turns orange when plugged it. It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.
-
My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.
Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176 -
My backlight will not turn off automatically. I have to manually turn it off and forget to sometimes and that drains my battery. Does anyone know how to make it turn of automatically after a few seconds?
Use the Settings app.
Settings > General > Auto Lock
Is Auto Lock set to Never? Change it to less time. -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!
Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.
Maybe you are looking for
-
Please help me figure out what this kernel panic is about
Computer keeps crashing. Went to genius bar, said it was sticky windows, deleted that, came home, still an issue. I can't decipher what all the Console gibberish means. Thu Apr 14 00:53:30 2011 panic(cpu 1 caller 0x55db30): "!pageList phys_addr"@/Sou
-
Internet connects, but doesn't work properly
I know there are a lot of topics on this, but mine is pretty specific. I'm using a Macbook I bought last August (Model Identifier MacBook4,1) and running OS 10.5.6 (I can't update to 10.5.7 because I`m having trouble connecting. Recently I noticed a
-
Text in abode form as language dependent
Hi all, I have a text field Statement for detailed analyisis report of the Account. It's static text value. The title in the text field needs in 2 lines for language "DE". Currently it is in EN. How can I make the text field as language dependent. R
-
Execute code after show() in a Modal JDialog
Is there any way of executing a piece of code after a Modal JDialog's show() method ? I tried to run the code using SwingUtilities.invokeLater to no use. Any ideas ? Thanks !
-
IDoc Extension: Finding out user exit
Hi, Is there any standard way of finding out user exit for the extended IDoc? like documentation... Thanks and Regards, Madhu