Ipad 2 wifi charger got extremely hot plugged into a/c?

I plugged my Ipad 2 into the charger then into a/c.  I was charging my Ipad when I moved the charger and it was extremely hot to the touch. I unplugged it and am charging it from my Imac. Has anyone had this problem? 

There is this page for troubleshooting the iPad and iTunes on a Mac : http://support.apple.com/kb/TS1591
In terms of charging, have you tried a different charger and/or cable ? And you aren't currently using an iPhone or iPod charger with it - the iPad's charger is twice as powerful.
Have you tried a reset to see if it charges properly after it's restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • My iPad Air when charging cuts in and out, also the charger is extremely hot. Have tried different chargers with and power outlets, all with the same outcome.

    My iPad Air when charging cuts in and out, also the charger is extremely hot. Have tried different chargers with and power outlets, all with the same outcome.

    The troubling thing to me is the fact that the charger gets extremely hot - according to what you are saying. The charger can get warm and can get fairly warm when the iPad is charging, but it should never get extremely hot. Make an appointment at an Apple Store, take the iPad, the cable and the charger with you and ask them to look at everything for you.

  • It says not charging when it is plugged into my mac desktop

    My Ipad 2 says not charging when it is plugged into my computer and it does not show up on the side bar in the itunes app.

    It is possible that the USB port is not working properly as well. This support article might be of help.
    http://support.apple.com/kb/ts1591
    Sometimes all it takes is a restart - quit iTunes, restart your Mac and restart your iPad and see if that helps at all.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • HT4623 my daughter was trying to do an ios update on her new ipad mini it now says to plug into itunes she does not have a seperate computer for that, the reason for the ipad can anyone tell me how to fix this or how to reset the ipad

    tried to do an ios update the ipad mini is now asking to plug into itunes, have now seperate computer to do this can not get any other screen to come up on ipad can the  ipad be reset or how do I fix this

    If it's showing the connect to iTunes screen then it sounds like it's gone into recovery mode and will need to be connected to a computer's iTunes in order to be reset. Does neither she nor you have a computer, and if she hasn't has she been backing up to the cloud instead ?
    Depending upon what country that you are in, and whether content is still in the store, she might be able to re-download some/all of her downloads via the Purchased tabs in the App Store and iTunes store apps

  • IPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    Hi ..
    Follow Apple's instructions for recovery mode here >  iOS: Unable to update or restore
    You can restore from a backup.

  • Ipad mini charger getting very hot

    ipad mini charger getting very hot. Not the ipad. What is it? A problem, or normal?

    Warm is normal. Too hot to handle, literally, is not. So if you can hold it, then it's probably fine. Mine gets hot when it's charging. But if it's too hot for you to hold then you should stop using it and get it checked out an apple store.

  • HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Try here  >   - http://support.apple.com/kb/TS1369.

  • My refurbished iPad 3 charged for first time it and charger got very hot is that normal

    just replaced my refurbished iPad 3 with another.  Tried to charge it for first time.  Noticed it got very hot and so did charger.  I don't recall my other iPad doing this  is this a defect in the ipad?

    Define "hot".
    If fully drained both the battery (that essentially fills up most of the body of the device) and the charger will get quite warm, though not unbearable. Time to charge will vary according to device: my iPad 4 takes about 6 hours if almost flat, but takes about 40 min if at 75%.
    Be sure to use ONLY its original charger OR chargers that are rated for iPads. They draw twice the current as phones and will cause phone chargers to get much warmer than usual.

  • IPhone will not charge or connect when plugged into my Mac

    The past few weeks I have had a major issue with my iPhone. When I plug it into my Macbook via the USB port it will neither connect to my iTunes or connect. However, when I put it into a iPod speaker system that I have, it charges. I thought maybe it was a bad wire so I got out my spare one and still no luck. My iPod will connect and charge on my Macbook when it is plugged in with the same chords. The speaker system has a port for the USB connector to plug into and I tried that. Once again, the iPod will connect to my Mac, but my iPhone will not. I don't know what to do so that I can sync my iPhone to my Macbook. Can anyone help?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    and
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT1386 My ipod touch is not recognized and will not charge or sync when plugged into my computer, how do I fix this?

    My 5th gen Ipod touch has not been recognized by my computer since IOS 7 came out. I havn't been able to sync any new songs (wi-fi or plugged into the computer) and will not charge while plugged into the computer. I have tried to find it in the device manager menu also but to no avail.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    and
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT1719 i have got the music downloaded onto the computer, but got my shuffle plugged into computer but cant get the music onto the shuffle. can anyone help.!!

    hi ; i got the music from the i-tune store downloaded onto the computer but got th shuffle plugged in but cant get it from computer onto shuffle. help please.

    It depends on your shuffle type, and whether you want to do it manually or using automatic syncing.  It seems like you linked off of the document that describes how to load content to your shuffle.  This one
    http://support.apple.com/kb/ht1719
    If you tried following the steps in the document, where did you run into problems?  That document also shows the four types of shuffles.  Which one do you have?  Which method from that document are you trying to use?
    NOTE:  In iTunes, if the sidebar (along left side of window) is not visible, from the menu bar, under View, select Show Sidebar.

  • Does anyone know yet if the new iPad will support a USB microphone plugged into Garageband via iPad's USB Camera Adapter?

    Hi,
    I've ordered a new iPad 64Gb which will arrive early April. My hobby is making music, so does anyone know yet if the new iPad (3rd generation) will support a USB microphone plugged into Garageband via iPad's USB Camera Adapter? I am hoping to use such a portable setup to record live performances of voice & acoustic instrument.
    Thank you,
    John.

    When in doubt, try it out. I bought the Apple camera connection kit & used it to connect my Blue Snowball usb mic to my new iPad 3rd generation. It works just fine. I made some test recordings in GarageBand on my iPad 3 using my Snowball mic. They sound great.

  • HT4623 after installing ios on my ipad, its showing a display to plug into itunes. i cant operate my ipad. what happened?

    can anybody help me?

    i have same problem....even connected to itunes using laptop also not function.
    now my ipad not charging.

  • Does anyone else have a problem with their charger getting extremely hot?

    When I charge my macbook pro, the charger gets soooo hot- Should I get a new one or does apple repair them? It is so hot I can't touch it sometimes.

    I would take it to an Apple Retail Store or an Apple Authorized Service Provider  (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store,  make a reservation.

Maybe you are looking for

  • After updating to iOS 8.2, messaging application is unstable

    I have updated my iPhone 5 to iOS 8.2 and when I now go into the Messaging application and decide to delete a message thread, the whole messaging application is very slow and then all of a sudden all my message are gone. This has happened 3 times sin

  • HTTP Adapter Interconnect 10.1.2 problem

    Hello, Can someone explain me how to use Interconnect for sending xml-messages from a database to a webservice, and processing the answer? We tried the following: Install a database adapter Install a (sync) http adapter The common view is a procedure

  • AZWR condition type

    Hi, I would really appreciate it if someone could shed some light on the AZWR condition type. I have the following queries - 1) When the condition type AZWR is included in a pricing procedure, which account key should be assigned to it ? 2) Should AZ

  • Without QM module, for materials is in Quality, Miro should not happen

    Hi All without QM module, After GRN  the material is going to quality inspection. For such Purchase Orders, I want to restrict the invoice verification process. system should give error message. Regards M S K

  • Time and date need to be reset when the battery dies

    Any help on fixing this issue? Computer gives the warning that the power is running low, then turns off with 6% battery left. When I power it up the system needs to reboot completely and each time the date and time need to be reset.. Why is this?