IPad 2 WiFi has too many router connections.

I wanted to check to see if other community members were experiencing the same issue with the iPad 2 having an exorbitant amount connections to their router. Looking at my Conntrak results I'm seeing about 100+ connections on average even when the iPad 2 has "No Apps Running" in the task tray (excuse me for using the wrong nomenclature). Of course background processes are running, but I don't even have 100 apps on my iPad 2.
Further investigation shows that a lot of them are just simple outbound TCP connections to the same IP. Timeouts are normal, which means that these connections linger for a good amount of time. Even on a network with 1000 hosts, this isn't really an issue, but it certainly isn't anything to ignore.
CPU utilization is normal, if any, so I do not suspect any latency. The access point which is connected to my network is a 802.11g radio with WPA2-AES encryption. CTS is disabled.
Message was edited by: Kristerpher Henderson

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Settings>General>Reset>Reset All Settings

Similar Messages

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

%COMMON_FIB-6-FIB_RECURSION: has too many (8) levels of recursion during process switch

Hi,
I often get this message in my logs;
%COMMON_FIB-6-FIB_RECURSION: has too many (8) levels of recursion during process switch
Does anyone have any idea what this means? This same router has, on average, one disconnect from our GRE tunnel each day and I can't connect to it externally until the cable modem is rebooted. The log above is the only thing I've got to go on really. Everything else looks normal.
Thanks!

i am using weblogic 10.3 but still getting <Oct 8, 2009 3:26:35 AM EDT> <Error> <Application Poller> <BEA-149411> <I/O exception encountered java.io.FileNotFoundException: /my123Domain456/123456ServerName/servers/123456ServerName/cache/.app_poller_lastrun (Too many open files).
java.io.FileNotFoundException:
My clients are getting to others as I use Oracle 10G Rac oracle 10 Weblogic and getting 100s of problems, save me geeks.

Too many database connections and configurator logins ?

Hi,
We're having some performance and/or stability problem with Oracle Waveset 8.1.1. patch 2.
I'm not sure what the problems is yet, but two facts got my attention:
I noticed for too many database connections waiting to be closed on the OS, varying between 600 and 1200 :
TCP: IPv4
Local Address Remote Address Swind Send-Q Rwind Recv-Q State
doesburg.ic.uva.nl.33555 hopewell.ic.uva.nl.1539 49640 0 49640 0 TIME_WAIT
doesburg.ic.uva.nl.33556 hopewell.ic.uva.nl.1539 49640 0 49640 0 TIME_WAIT
doesburg.ic.uva.nl.33557 hopewell.ic.uva.nl.1539 49640 0 49640 0 TIME_WAIT
doesburg.ic.uva.nl.33558 hopewell.ic.uva.nl.1539 49640 0 49640 0 TIME_WAIT
etc.
(doesburg is our Solaris 10 server where the tomcat application server is installed, hopewell is our Oracle 10g database server )
I also noticed numerous Configurator logins in the audit log, about 10 per second:
Audit Event Details
Timestamp 03/15/2011 04:37:05 PM MET
Subject CONFIGURATOR
Action Login
Result Success
Identity System Type User
Object Name CONFIGURATOR
Server DOESBURG.IC.UVA.NL
Sequence Number No Value
Interface BPE
Resource No Value
AccountId No Value
Message No Value
Changes No Value
Organization Membership Top
Event Parameters
Session ID #SESS#15E4CCFDD2645B36:10C191A6:12EB99FCC85:-5A50
Configurator logins on the BPE interface which we don't use?
Has anyone seen something like this before? What could cause it?
Greetings,
Marijke

I'm still struggling with this problem. Our database administrator did add some tracing, and we see these type of queries:
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT task.id, task.type, name, :"SYS_B_0", :"SYS_B_1", summary, :"SYS_B_2", :"SYS_B_3", xmlSize, :"SYS_B_4"
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT object.id, object.type, name FROM object WHERE object.type=:"SYS_B_0"
SELECT tstamp, id, version, changeType FROM orgchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM rolechange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
SELECT tstamp, id, version, changeType FROM objchange WHERE tstamp > :1 AND type=:2 ORDER BY tstamp
541 seperate logon sessions by waveset in about 2 minutes.
Has anyone seen this? What could cause it?
Greetings,
Marijke

Access 2010 table has too many fields for web database - how to split into two web-compatible tables?

Hello,
I'm in the process of converting an Access 2010 database into a web database and I'm having some trouble. I have a table which has 236 fields, which is more than the 220 field limit for web-compatible tables. I have tried to split this table into two tables
with a one-to-one relationship, but web tables can only use lookups as relationships. I've tried to connect the tables with a lookup and then synthesize a one-to-one relationship by using data macros but I'm not having much luck.
I realize that 236 fields is a lot, but it must be set up this way because each field represents a tasks and is a yes/no box to verify that the task has been completed - and the records are different employees for whom which the tasks need to be completed.
Could someone please help me figure out a way to make this table web compatible?
Thank you,
Ryan

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/access-2010-table-has-too-many-fields-for-web/06ee81ea-24ab-48b8-9b8f-0ed08a868bac
Regards,
George Zhao
TechNet Community Support

Trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed

trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]

The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

E Table of aggregate has too many partitions

Hi,
While checking performance info of the query I'm getting red light on one of the lines saying aggregate 100067 has too many partitions in E table.
Could you guys pls let me know what is this all about and how to reslove the same?
Thanks
R

Does your cube have compress after rollup on the aggregates...?
The aggregate is partitioned in the same way the E fact table is partitioned. You should choose the compress upon rollup option in the rollup tab of the infocube... Set the same and then if possible deactivate and do another rollup to the aggregate...

Too many authenticated connections

I've got a customer with a BT line, sending via mail.btinternet.com. For the last month or two they've complained that they keep getting asked for their password.
I've checked out the customer's system and I can see that it's not a password problem, but the SMTP server is instead coming back with "too many authenticated connections".
I can see that a host of BT customers on here are reporting password problems, I would guess that they are experiencing the same issue, that these are not password problems, but SMTP server issues on BT's new mail systems. The message would suggest that the server is unable to take any more connections so some sort of resource issue at their end.
Of-course unless you're looking under the bonnet of the SMTP connection, you won't be seeing this message, just the popup asking for your password again. It's not a password issue. If you try the connection multiple times, it will go in the end (when you get a connection that is willing to be accepted by the SMTP server.
I've configured the mail client to the letter, as per BT's stated configuration, and like I say, it will work on a percentage of connections. On a good run, you might get 10 out of 10 successes, other times 1 in 3.
Please let me know if anyone is experiencing the same message. The message could perhaps be a red-herring of some kind, perhaps not able to successfully negotiate the authentication / encryption using this particular mail client. The customer is using Mac Mail and there do appear to be quite a few customers referencing Mac's / IOS on this forum, not many Outlook customers complaining.

Hi Bookanengineer,
Many thanks for your post, we have been away and asked some questions around this and the view is that this is unlikely to be an SMTP load issue. There is a limit to the number of authenticated connections we allow per user and the password pop ups being seen are more likely to be due to the customer having too many authenticated connections which could also be due to sessions not being closed correctly
We believe that this is more likely to happen to client users as each time your client connects it opens an authenticated session. If, when you disconnect, the session does not close for whatever reason, the mail server still shows you with a session open. If that happens often you will quickly hit the limit for the number of sessions allowed per customer
We do however need to eliminate other issues so need examples to further investigate, I appreciate that you are speaking on behalf of one of your customers, but if you are able to send in any details to us so we can take a look that would be great. You can send in the details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

UTL_MAIL --- ORA-30678: too many open connections

Hello,
I have a pl/sql package that sends out emails using UTL_MAIL pkg pointing to an Exchange server, an APEX app calls this pkg.. This package used to work fine for months but I recently noticed that some emails are not being sent as expected. The package loops through a set of action items satisfying some conditions and send emails based on that ( this number is expected to grow every day ). I checked the errors log and I found this error:
ORA-30678: too many open connections
I think this means that I have to close the connection everytime I send en email, but UTL_MAIL does NOT have a function or a proc to close connections, right ?
I don't know what causes this error to happen, but I suspect that this started happening right after we re-pointed the UTL_MAIL pkg from a Lotus Notes server to an Exchange server.
I am also seeing this error:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
I know where this error comes from (usually a null email id in the FROM or TO field ), but can this be causing the first error to happen ?
Please advise if you got this error before, is it a bug in oracle 10g as I read in some blog ? or is the second error happening make the Exchange server refuse SMTP connections ???
Thanks,
Sam

Hi Sam,
seems to be a bug in UTL_MAIL if you ask me, as you are right - there is only /send/, no option to close, so I'd expect this to be done automatically.
Anyway, though UTL_MAIL is usable for basic mailing, I prefer using a custom mail implementation based on UTL_SMTP. The most important reason is that most mail servers don't work without authentication. And if you have done this once, you can reuse the function/procedure/package as simple as UTL_MAIL. The good news is, that there are several examples published that provide you with the functionality you have in UTL_MAIL at once - with the difference, that you definetly get your connection closed when you expect it to be closed.
You'll also be able to handle empty addresses. Perhaps this error actually causes UTL_MAIL to "forget" to close the connection, if this exception isn't caught before in order to close an open connection before raising it to the outside.
One example implementation for using UTL_SMTP can be found [url http://www.morganslibrary.com/reference/pkgs/utl_smtp.html]here
-Udo

Help needed : javamail Too many simultaneous connections

Hello
i'm using javamail to develop a webmail
i've created a service Class , and all things works well , but i have a serious problem when i browse my webmail ( viewing folders: inbox / spam / etc or messages) i get an error saying :
Too many simultaneous connections. (Failure)
i know that the imap server dosen't support more than 10 simultaneous connections.
But i can't say to users using my webmail to do not a lot of actions !!! , and also when i use thunderbird for example it works fine without errors even if i do a lot of actions/connections
How can i solve that problem ?
Thanks
A1 OK [email protected] authenticated (Success)
A2 CAPABILITY
* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
DEBUG: no connections in the pool, creating a new one
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)+
+* OK Gimap ready for requests from MyIP 24if2631473eyx.55+
+A0 CAPABILITY+
+* 1 FETCH (FLAGS (\Seen))+
+A4 OK Success+
+* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY+
+A0 OK Thats all she wrote! 24if2631473eyx.55+
+A1 LOGIN myemail mypwd+
+A1 OK [email protected] authenticated (Success)+
+A2 CAPABILITY+
+* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)
* OK Gimap ready for requests from MyIP 23if2388548eya.46
A0 CAPABILITY
* 1 FETCH (FLAGS (\Seen))
A4 OK Success
* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY
A0 OK Thats all she wrote! 23if2388548eya.46
A1 LOGIN custom.infoma1 mypwd
A1 NO [ALERT] *Too many simultaneous connections. (Failure)*
A2 LOGOUT
* BYE Logout Requested 23if2388548eya.46
A2 OK Quoth the raven, nevermore... 23if2388548eya.46
A4 CLOSE
A4 CLOSE

Thunderbird supports disconnected or offline operation. It can disconnect from the server and then reconnect later
and synchronize its state, so that you never know it was disconnected.
You can do that too, but it's a lot of work.
For webmail, the simplest approach is usually to have only one folder open at a time for each user.
If your IMAP server is limiting you to 10 connections total, across all users, get a new IMAP server.

ORA-30678: too many open connections

Hi,
I executed this procedure..
CREATE OR REPLACE procedure
TRY.e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
l_from := from_name;
--UTL_SMTP.open_data(l_mail_conn);
dbms_output.put_line('email test ');
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
dbms_output.put_line(mesg);
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
exception
when others then dbms_output.put_line(sqlerrm);
END;
However, email could not be sent to recipient. Below is the error message.
Sending email to subject: Reminder to settle outstanding bil for Invoice No: CA/01062010/555
call email_mssg cmd 3
email test
Date: 23 June 10 15:11:50
From: <>
Subject: Reminder to settle outstanding bil for Invoice No: CA/01062010/555
To: [email protected]
Please Settle Outstanding Bil for your Invoice No: CA/01062010/555. Thank you
ORA-30678: too many open connections
Below is the username I keyed in the email_setting table, with reference to the select username statement from the procedure as above.
username in email_setting => [email protected]
I also tried key in as '[email protected]' but still not working.
Could someone suggest any solution? Thanks..

Mr. Saubhik,
Yes, no data passed for the From: as shown from the dbms output error message shown below:
Sending email to subject: Reminder to settle outstanding bil for Invoice No: CA/01062010/555
call email_mssg cmd 3
email test
Date: 23 June 10 16:15:04
From:
Subject: Reminder to settle outstanding bil for Invoice No: CA/01062010/555
To: [email protected]
Please Settle Outstanding Bil for your Invoice No: CA/01062010/555. Thank you
ORA-29279: SMTP permanent error: 501 5.1.7 Invalid address
I am clueless how to settle this. I don't want to hard code the sender's email address. Please help. Thank you.

SMTP Send Mail - too many authenticated connection...

Using Outlook on a MAC, and within this last week I have started to get this error when sending mail. I have read all the forum posts and help documents on this issue and ensured that my settings are as described and yet I am still having this problem.
Should I be switching to IMAP to avoid this problem, and if so how do I do that without losing all my SMTP downloaded email?
Thanks for any insight - it is causing me real issues now as I'm job hunting and can't reply to job emails!!!!

Yes same problem for me. In the last three days, or so, I will get the random "too many authenticated connections" message. I have just phoned BT twice this afternoon and had great trouble understanding both Indian guys. One suggested he's fixed it by adjusting things at BT to accept "S Client Mail", whatever that means! That however didn't fix it. The second suggested I needed to reset password (easy option that one), until I pointed out that I am having no trouble with password use on the BT webmail page or through my phone. He then said I'd have to reload Outlook to solve the problem. Yeah right, like I'm gonna loose all my emails, settings and calendar to satisfy his theory of "if it doesn't work then reload it". There is clearly a server problem somewhere and OH, how I would love to speak to someone, (anyone), at BT who actually knows what they are talking about from a network/server angle. Anyone worth their salary in networks could trace my activity online and find out what was going on and why it was failing.
Setting POP3 and all others checked by BT as being correct.

ORA-30678: too many open connections with UTL_MAIL.send

I'm have just recently started getting the ORA-30678: too many open connections error while calling the UTL_MAIL.send procedure to send emails via a pl/sql package. The call is made within a loop and there can be a significant number of calls made to this procedure. In fact, I received this error over 1400 times within the last three days. This was previously working until I made a change to the processing which now results in a larger number of emails/calls to this procedure. I don't see any documentation on how (or if) I can close the connection with UTL_MAIL.
I'm using Oracle 11g. Any insight would be much appreciated.
Thanks,
Teri

Looks like a bug possibly, check out this MOS Note:
Ora-30678: Too Many Open Connections From UTL_MAIL [ID 788442.1]
The bug note says it was fixed in 11.2. Not sure which version of 11 you are running.
Edited by: Centinul on Apr 26, 2010 2:07 PM

I can´t send or receive emails theres a message Too many simultaneous connections. (Failure)

What can I do if theres a message that says Too many simultaneous connections. (Failure) an error in IMAP conection
I can´t send or receive any emails

Hi monic,
I'm sorry to hear you are having mail issues on your Mac. I'm a bit unclear exactly which version of OS X you are currently using, but if you continue to have issues sending or receiving emails, you may find the troubleshooting steps outlined in the following article helpful:
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Regards,
- Brenden

How to disable ipad due to too many passcode entered?

how to disable ipad due to too many passcode entered?

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

IPad 2 WiFi has too many router connections.

Similar Messages

Maybe you are looking for