IPAD 2 WiFi only. Can I access the Internet when I plug into my computer that is connected to a LAN?
I just purchased an IPAD2 and I love it. It's WIFI only, and I want to access the Internet when I plug in to my computer since I don't have 3G capability. But when I try and connect it won't allow. Is this standard? Am I preventing from high speed internet access on my IPAD 2 even when my computer is connected to the Internet? Any help would be much appreciated
You cannot access the internet through the connection to a computer hooked up to the internet.
It may be possible to configure your PC as a WiFi access point. Check your PC documentation for its capabilities.
Or, purchase a WiFi router and hook it up to your ISP modem. You can hardwire your PC to the modem.
Good WiFi routers can be purchased for $30-$40 dollars if you shop around.
Similar Messages
-
I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?
but in the home with wireless internet access , it is continued when off, sometimes can not working,
What does "it is continued when off" mean?
And the same for "somtimes can not working"? -
MY APPLE TV SHOWS THAT iT IS CONNECTED TO MY WIFI, BUT CAN NOT ACCESS THE INTERNET
my apple tv found my wifi, but can not access the internet??
I have been on the phone with Apple, done all of the trouble shooting they have recomended. When I attempt to connect it to the internet I get a message reading "your apple tv is connected to your wi-fi but cannot connect to the internet. I have plugged the modem right into the apple tv and it still won't work. This is the second device I've used. (apple gave me a new one after the first didn't work). I just thought there might be someone out there who had the same issue and knows how to resolve it.
-
TS1398 my ipad is connected to my wifi, but can't access the internet.
When I am in the same room as my wireless router, my Ipad accesses the internet correctly. When I go into a room where my Ipad and laptop couldn't reach my router, I installed an extender. Now, my laptop and my wife's Ipad can access the internet, but my Ipad can't. What should I do?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
how can I access the internet on my ipad mini while wifi signal is strong,
Your question isn't clear enough. If it's a strong signal, you're good to go.
-
Can you access the internet using wifi only on an iPhone 4?
How can you access the internet using WiFi only (no service) on an iPhone 4?
Assuming your connected to wifi - go to safari.
-
My OSX 10.7.5 iMac (late 2011) will connect to my university's wireless network and thinks it's connected to the internet, but cannot resolve any DNS - and cannot actually access the internet on any browser or internet-utilising app. My university has 2 networks, a regular wifi one and an eduroam one. I have the same problem on both networks. My MacBook, running Snow Leopard, and my iPad (latest software) both connect to both networks just fine.
Because it's my university's network, i can't reset my router or anything like that. I'm in halls. I don't think it's a network issue, because all my other devices are fine.
I've searched high and low on these forums but haven't found anyone having exactly the same problem as me - I've heard of odd few minutes of people losing their connections in this manner, but my computer's been down now for hours and nothing. I've restarted it many times, even once in "Recovery Mode" and I'm getting nothing. I've followed instructions to flush my DNS cache, renew DHCP leases, I've tried manually inputting various DNSes I've found (eg the 8.8.8.8 and 8.8.4.4 google ones), none of which have worked.
Using terminal, I can't ping either an http:// domain, or an IP address. Both get "timed out" as a response. I can't access the internet on any browser (chrome, safari, firefox), my google mail notifier, Skype, or my twitter app. Or anything else.
I'm relatively computer literate, but I'm not particularly code-savvy, so I'd really appreciate it if I could get some step-by step help on here, bearing in mind what I've already tried. I'm really worried, because it all seems to have happened completely out of the blue. Last time I updated was some time a couple weeks ago; I update whenever my software update beeps at me.
Thanks.
link.Go step by step and test.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any. -
Since downloading the IOS7 I can't access the internet via a wifi. I would like to remove it, is it possible? I have the ipad2
Sorry, no. Apple does not support downgrading.
Have you tried to go into your settings, reset, reset network settings? It'll erase your current network from your iPad and let you start over. -
My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?
I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
All else fails? Restore it. -
I can no longer use my iPad 3 since downloading IOS 7. I can't access the internet, the app store, or itunes. Can't download anything or receive or send emails. Not happy. My iPad is basically useless. Tried to erase and restore. can't even do that. whish I had waited.
Hello suzanefromnv,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Best of luck,
Mario -
I am trying to connect my Ipad 2 to my Mac Air over bluetooth.
I can connect them to each other, and both machines say they are connected over bluetooth.
However I can not access the internet on the Ipad...says it is not connected to the internet.
Does anyone know if you can fix this?
THank youYes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??
I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
Thank you! -
HELP !!! I can not access the Internet Recovery In Mac Pro!
HELP !!! I can not access the Internet Recovery on my Mac Pro (mid 2012)! Mac Pro has Internet Recovery ?
"Regular" Recovery (from the Recovery partition on your Hard drive or your Time Machine Backup) remains available, but Internet Recovery (from firmware only) is not a feature on the silver tower Mac Pro. It is not on this list:
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
But the basic recovery features are available if a recovery partition is available:
OS X: About OS X Recovery - Apple Support -
How to reset password on an ipad. I can't access the settings the iPad is locked
How to reset password on an ipad. I can't access the settings the iPad is locked.
If you are talking about the restrictions Passcode - there is no way to reset it. You have to restore the decide to factory settings. If you restore from a backup, and the Passcode is in the backup, that will not work since you will be restoring the Passcode that you cannot remember back onto the device.
The only thing that would work is if your backup was created before you put the Passcode on the iPad. The Passcode would not be in that backup and you could restore from that one. -
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.
Maybe you are looking for
-
How do I delete mailboxes in Mail ios8?
I have been trying to complete some housekeeping on the iPad Mini 2 with iOS 8.1.1. The first problem was to create Folders to stick the e mails in. This I managed to do via my ISP, though quite a tortuous route to take. In so doing, I now find ther
-
Document mention about can do purchase records import as : Novell Doc: ZENworks 10 Asset Management Reference - Importing Purchase Records But there is no format decryption or sample format can follow, Any hint for this ?
-
How to make a test section of a large printout?
Is there a way to print a test section of a large print? Let's say I want to make a final print that will be 24" x 36". Before using up a big sheet of paper and all the ink, I want to print a section of it onto smaller paper, like letter size. I real
-
Hi All, We currentently have SAPGUI 7.10 installed including GuiXT to client PC's. We've not really used it much. If we decide to make more use of it I see one option is a server based installation. Though he documentation isn't great I did install i
-
Hey all, I'm using auto-trace to perform a stroke by stroke reveal of scanned hand-written text. The problem is the auto-trace feature places the masks in a fairly random order, as opposed to left-right or top-down. It means I need to manually reorde