Ipad 2 wlan
Sehr geehrte Damen und Herren,
wlan von meinem ipad 2 stürzt oft ab. Mal da und weg. Bei Online konnte ich nicht damit anfangen. WLAN von meinem iPhone ist völlig in Ordnung.
Also?
Mit freundlichen Grüßen,
Kersten Kraake
iiOS: Troubloeshooting Wi-Fi-Netzwerke und Verbindungen
Similar Messages
-
Hi everybody,
just bought my new ipad wlan+32gb. When I want to start my Ipad it unfortunately does not work. I can choose my wlan connection but thats it. I cannot move on.
Any ideas? Thanks in advance.Since your iPad is new, you should contact Apple Care http://www.apple.com/support/contact/ and they can walk you through your problem free of charge.
-
How do i connect my ipad to WLAN internet? it says its loading but never comes up with a tick
I have recently moved to Madrid in Spain from England where i bought my iPad. neither my iPad nor iPhone will connect to the WLAN internet in the house that I am living in. When i type in the password it saying it is loading however the tick never comes up and i cannot access the internet. This is a real problem as I need to use my iPad to apply for university. Any suggestions?
it still wont work but the same thing is happening when i try to connect on my iphone which makes me think it is something to do with apple products on the wifi
-
I there a way to connect an Ipad to wlan internet?
I there a way to connect an Ipad to wlan internet?
Airport Express
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/1f4ad14e1067b2d0eb 1e39448ff51d0b.jpg
https://www.apple.com/airportexpress/ -
5508 - iPad getting disconnected from WLAN Using EAP-TLS
We are seeing an issue with an ipad connecting to a WLAN configured for EAP-TLS using ISE 1.2, getting disconnected. The ipad will hop top another SSID. It will connect back to the other ssid when selected. Any ideas? I have a debug client for when this happened.
*apfMsConnTask_0: Apr 08 14:03:57.508: Association request from the P2P Client Process P2P Ie and Upadte CB
*apfMsConnTask_7: Apr 08 14:04:57.855: Association request from the P2P Client Process P2P Ie and Upadte CB
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Association received from mobile on BSSID 54:78:1a:2f:84:56
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Global 200 Clients are allowed to AP radio
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Max Client Trap Threshold: 0 cur: 4
*apfMsConnTask_5: Apr 08 14:05:17.345: 04:54:53:7b:9e:7a Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 172.30.230.213 RUN (20) Skipping TMP rule add
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a apfMsRunStateDec
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 172.30.230.213 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Complete to Mobility-Incomplete
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Reached ERROR: from line 6355
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [54:78:1a:2f:84:50]
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 730
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a Re-applying interface policy for client
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
*apfMsConnTask_5: Apr 08 14:05:17.346: 04:54:53:7b:9e:7a 0.0.0.0 DHCP_REQD (7) Changing IPv6 ACL 'none' (ACL IDUse profiles for the wifi settings on the iPad
A reset of network settings will clear the network history, but the profile will add it back in automatically
http://images.apple.com/ipad/business/docs/iOS_Deployment_Technical_Reference_EN_Feb14.pdf
Great Cisco doc for BP and troubleshooting of Apple devices:
Enterprise Best Practices for Apple Mobile Devices on Cisco ...
Make sure the app uses URIPersistWifi call
https://developer.apple.com/library/ios/documentation/iphone/conceptual/iphoneosprogrammingguide/PerformanceTuning/PerformanceTuning.html -
Itunes don't detect my ipad via wlan
I've installed latest version of itunes on my pc.
I like to sync iphone via usb and ipad via wlan. iphone is dedected ipad not. Except ipohone is not connected and pc is newly started. In this state ipad is detected and synced.
So i think all konfigurations are done as a sync is possible.
Where is the button to tell the pc to search for the ipad?
thanks for support or hint.
ramonHi ramon8591,
If you are having issues with Wi-Fi syncing between your iPad and iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers,
- Brenden -
After entering the Wlan password I can’t use the „connect“ button. The button is
deactivated. Did somebody have a solution? I have an iPad 3 with IOS 8.0.2.Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.
-
I am quite new with a mac computer. But i think i nearly tried everything, i have no idea what else could help...
My iPhone and iPad are working perfektly in the wlan. My iMac works very rarely. Yes it worked once by manual ip, but later it did not work again.
Wlan always works (sometmes it takes a few seconds until thesymbol is fat, mostly it starts with "no internet")
I tried so many things...
- manual ip found out by my windows pc
- $ in front of the password
- the apple faqs on the websites
Very strange, but i hope someone solved an comparable problem already ;)
Thx!I had a surfstick before, does that influence the whole thing?
And another thing: in other wlans the iMac worked perfectly... Without any manual settings etc.
Anyone an idea? -
Hi
ich habe einen neuen ipad air gekauft. Nutze nur wlan. Theoretisch...
Die Wlan Verbindung kommt nicht, langsam oder nur sporadisch zustande.
Fritzbox 7270 alle updates, patches, etc sind installiert
wlan geht mit anderen Appel produkten einwandfrei (iphone 4s, iphone 5, ipad mini)
wlan geht mit Microsoft Wind 7 problemlos
IOS 7.03 ist installiert
habe ipad auf werkseinstellungen zurückgesetzt, Netzwerkeinstellungen zurückgesetzt und das alles 2x gemacht
imho liegt die Gehlerursache eindeutig beim ipad air, da alle anderen geräte funktionieren?
was kann ich noch machen?
mfg tzHallo tz1234,
ich habe genau das selbe Problem.
Die WLAN-Verbindung des "iPad Air" ist sehr schlecht. In der Web-Oberfläche der Fritzbox wird mir eine bestehende Verbindung angezeigt.
Trotzdem ist die Verbindung sehr, sehr langsam oder nicht vorhanden.
Habe auch schon alles probiert:
- Netzwerk löschen und erneut konfigurieren
- Neugestartet
- Empfehlungen von Apple für WLAN-Einstellungen überprüft.
==> Nicht hat geholfen.
Was kann ich noch unternehmen?
Vielen Dank vorab. -
Transfer files from pc to ipad without internet/WLAN without erasing everything
Hi,
we have the following problem. Our Ipad is synchronized using Itunes with a Macbook. From time to time we need to transfer a few PDF files from a PC to the Ipad. We can only use a cable here, since WLAN isn't available and files cannot be transferred through the internet.
When I tried to attach the Ipad to the PC it wanted to delete everything on it and sync with the Itunes Library on the PC.
Is there a way to transfer the files without deleting everything?
I called support but that didn't really help me.
Thanks in advance for your input.In your case, the key is to keep your iTunes organized in the way you can perform the sync without losing data. Obviously the most efficient way would be using the internet to add isolated files. If your workplace has only wired connection, a very basic and cheap solution can be adding a USB Wireless Adapter that costs around 30 bucks. With this adapter you can create an ad-hoc network between one PC and the iPad and then get internet on it.
Another way is to use a laptop that have Ethernet adaptorand Wireless adaptor. In the same way, you can create an ad-hoc network and share your wired internet connection through the wi-fi to the iPad. You can even use your smartphone to share the internet connection. This kind of connection from smartphones are called tethering connection. The iPhone is ready to tether by USB...not sure if can tether via wifi. It should do...On the Android phones 100% sure that works. Thats what I do when I'm on pyblic transport and want to use internet on my iPad to watch some videos on the go.
With the internet connection on the iPad,you can use Dropbox to put Documents into the iPad or even use iCloud to doit.
There's many ways to do it...just choose which way you want to use.
I hope it helps. -
I need to configure my IPad for the co WLAN , The advise i got is to send the certification through exteral mail to the IPad and install them but this option cannot go in my case as the network availbe now is co WIFi . I tried to share the certification from my microsfot laptop through itunes but i cannot install them in IPad as there is no application can open them . Can any one advise me what is the applicant can be used to run this certifications ( Cer files ) in IPad .
If you are running OS X 10.5.8 as your profile says, that is the problem as you need to be on OS X 10.6.8 (Snow Leopard, or above). If you do upgrade, after installation do a software update from the Apple menu so that the OS and iTunes gets updated to the latest version for SLeopard. Here's a snippet from the iPad mini tech specs:
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
You can upgrade to Snow Leopard ($20 U.S.) if your computer is compatible and you have enough RAM. Snow Leopard tech specs:
http://support.apple.com/kb/SP575
Snow Leopard can be order from Apple's Online Store in your country:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
Can't connect iphone,ipad,samsung to WLAN.
Hi everybody!
I'm having a headache with a problem, i hope you can help me guys.
We have a WLC 5508. This WLC has a guest network, which SSID was hidden. Now that i want to use, i enable the SSID broadcast
and try to connect to it.
With my laptop, or any other computer i don't have any problem. But with the gadgets (an iphone, ipad and samsung) i've been having some issues.
I can tell that, at the beginnning i thought that maybe it was a problem with the devices and the encryption i was using on the WLAN (WPA2 PSK). But
these devices can connect to another WLAN network in the same WLC, with the same encryption without a problem.
I try to change the encryption, i used all of the possible ways, even i let it opened, but nothing worked for me.
I'm not an expert on wireless, and i don't know if i'm missing a command or something.
Thanks everybody for your time, i really hope you can help me! :-)Duplicate post: https://supportforums.cisco.com/thread/2266804?tstart=0
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"***** -
We want to authenticate both a device (iPad) to our corporate WLAN, but after authenticating the device we would also like to authentiate the user in Active Directory if possible. Has anyone had any experience with this?
You need to make sure that the server sends the "GeoTrust DV SSL CA" intermediate certificate.
See:
* http://www.networking4all.com/en/support/tools/site+check/ (www.ucfs.net)
* https://knowledge.geotrust.com/support/knowledge-base/index?page=content&id=SO9557
* https://knowledge.geotrust.com/support/knowledge-base/index?page=content&id=AR1422 -
WLAN Verbindungsproblem iPad zur neuen AirPort Time Capsule!
Hallo liebe Community!
Erst gestern kaufte ich mir die neue AirPort Time Capsule im Münchner Apple Store. Nachdem alles konfiguriert war, versuchte ich auch die WLAN-Verbindung auf mein iPhone sowie mein iPad zu bekommen. Beim iPhone funktioniert das einwandfrei, beim iPad gar nicht.
Im Gegenteil: Das WLAN-Netzwerk ist zwar ausgewählt aber der "Ladekreis" dreht sich unendlich lang ohne dass eine Verbindung entsteht. Zur Verdeutlichung habe ich ein Bild hinzugefügt!
Alle Hilfvorschläge wie Aus- und Anschalten etc. habe ich etliche Male durchgeführt - ohne Erfolg.
Ich hoffe nun auf einige hilfreiche Schritte zur Lösung dieses Problems. Ohne mein iPad komme ich nicht in meinen geliebten Genuss des Zeitungslesens!
Danke an Alle die etwas beitragen.Set the wireless name differently for 2.4ghz and 5ghz.
The 2.4ghz name at least should be short, no spaces and pure alphanumeric. (IMHO all names should follow that standard)
Set a fixed wireless channel.. test a few, 11, 6, 1 in that order. If you live in a place with loads of wireless around you, 8 can also be a good choice.
The iphone and printer can only use 2.4ghz.
The MBA and iPad .. depending on model might be using 5ghz.
Make sure the security is set to wpa2 personal with a 10-20 character password.. also pure alphanumeric. -
Fehlermeldung
Für dieses iPad wurde seit 5 Wochen kein Backup erstelltbackupa werden erstellt, sobald das iPad angeschlossen,gesperrt und über WLAN verbunden ist.Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Starten Sie das iPad mit gedrückter auf den Schlaf und Home-Tasten gleichzeitig für ca. 10-15 Sekunden, bis das Apple Logo erscheint - ignorieren Sie die rote Schieberegler, wenn sie auf dem Bildschirm erscheint - lassen Sie die Tasten los. Lassen Sie das iPad gestartet.
Maybe you are looking for
-
IPad will no longer sync after iOS 5 update
I updated my Original iPad to iOS 5 and now it no longer syncs; it stays stuck at the preparing to backup step. This happens whether I try it via WiFi or via the standard way with the cable. I'm thinking I should do a Restore from Backup and get it b
-
X48 platinum LGA 775 mboard will only post in safe mode
I recently had a problem with my power supply (helped out by members of this forum) and have since changed it. Then the stock cpu cooler seemed to be playing up as the system would only post every tenth (or so) attempt. I therefore went out and purch
-
I got this message on my iPad: "This iPad hasn't been backed up in 4 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi." So I plugged it in and locked it. Already connected to Wi-Fi. Leftit that way all night. Nothing
-
Attachement for clearing documents
Hello! I want in a ABAP program send a SapScript form to the SER archive and the attach the archiv shortcut to the clearing document. As I understand it, I must only attach the form into the attachmentlist of the clearing document. SAP send the form
-
I have one scenario:- I want to have procurement of one semi FG as X i.e both in house as well as external procurement. If order quantity is less than 100, system should create planned orders to be converted to production orders. If order qty is more