IPad 2 won't restore from backup or connect to the internet

Hi,
I'm having some trouble with a 2-month old iPad 2.  The first of which was a sudden failure to connect to the internet on wifi, despite being able to connect to the network.  Have searched extensively, I tried all the solutions I could: airplane mode on and off, forget the network and reconnect, auto-brightness off, renew the DHCP lease, reset network settings, public DNS information - everything, and nothing worked.  The only thing I can't do reset the router as I'm on a public network and don't have physical access to it. When I connect to the network, after about 5 minutes I get details of the IP address, DNS server and all that stuff.  But I can't connect to the internet or even to the network's sign-in page.
So I thought there was nothing else for it but to do a restore.  What a mistake to make. For one thing, restoring to factory settings has done nothing for my wifi problem.  And now iTunes is unable to restore my iPad from the last backup.  It throws up an error message about not having enough hard drive space (I started off with about 7.8Gb free - and I had a lot less than that when I restored the iPad from my last iPad 1 backup when it was new). And when I quit iTunes, I have 0kb free on my hard drive.  Where has all the space gone?
So I suppose I have 3 questions:
Where did my 7Gb of hard drive space go and how can I get it back?
How do I restore my iPad so that I haven't lost all of my notes, emails, calendar events and the like?
How do I make my iPad connect to the internet again?
I know where iTunes keeps its mobile backups on my hard drive, but I'm loathe to go in and start deleting stuff, because I would like to retrieve all the stuff I put on my iPad in 2 months of use.
Any advice on any/all of the issues above would be greatly appreciated as my own efforts have managed to kill my iPad and do some very strange things to my laptop.
Thanks in advance,
Gus

Have you installed any sort of anti virus or firewall software? Something that could be blocking the connection?
Do you have a different cable to try?

Similar Messages

  • HT4859 Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?

    Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?
    Pls ignore auto correct mistakes!

    I found a way to get to my data.  So do not need remedy at this time. 
    fwiw, I changed my ios7.04 setup answer of restore from itunes to new iphone. Eventually that allowed me to set up icloud, then turn off find iphone, restore.  Very strange ios update. 

  • Hi ... I had to replace my iPad and I want restore from backup but I forgot my password, is there any way of recovering it?

    Hi ... I had to replace my iPad and I want restore from backup but I forgot my password, is there any way of recovering it?

    Would the backup be password protected? I don't know ... After you restore from a back-up, and if you have passwords set up, would the newly restored iPad require a password or would it be "live" for 5 minute or however long the iPad was set to wait to require a password? Maybe wiser heads can advise...

  • While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

    While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

    Hi Vidbrent,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • I have an iphone 3GS and I tried to upgrade the software, After it finished I tried to restore from backup and even though the itunes says there was a backup, After trying it comes up with error there was no backup to retrieve from. Can I get it back

    After updating my iphone 3GS I tried to restore from backup and after choosing the backup and syncing, it keeps coming up with error there wasn't any backup to restore from. Can I get it back or have I lost all my info ?

    See if these Articles help resolve your issue,
    Troubleshooting Backup Issues
    http://support.apple.com/kb/ts2529
    http://support.apple.com/kb/HT4946

  • Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please

    Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please it's driving me mad and Ive lost my phone

    What is the exact message you're getting?

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • HT1222 Can't download iOS6.1 to iPad b/c msg says I'm not connected to the internet when I am. Any suggestions?

    Can't download iOS6.1 to iPad b/c msg says I'm not connected to the internet when I am. Any suggestions?

    Where do you live? I live in Abu Dhabi, in the UAE. I’m wondering if this problem is related to the internet service provider here – Etisalat is its name. I tried one proxy, but it doesn't work.

  • I-Tunes won't open unless I'm connected to the internet

    I am a relatively new user to I-Tunes; when I try to open I-Tunes to play a CD or other files in my library, I-Tunes won't open unless I am connected to the Internet. Is this normal?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I can't deregistar my kindle app for the iPad, it keeps telling me I am not connected to the internet when I am

    I can't deregistar my kindle app for the iPad, it keeps telling me I am not connected to the internet when I am fully connected

    iPad.  It deleted all my books, but not the account info.  It keeps saying the sync failed too. 

  • IPhone 5 won't take a charge & won't restore from backup

    My iPhone 5 stopped taking a charge. So I updated to 7.whatever & backed it up. It still would take a charge so I went through recovery mode. That seemed to complete (I've done it twice now) However, the phone still won't take a charge and it won't restore from my backup. (Since the initial run through recovery mode it has never accepted the backup. It alway errors out saying the iPhone disconnected. It never disconnected physically and I've tried mutiple cables so which worn on my other iPhone so they are not the problem. If I plug the iPhone in it will cycle between on and off and never accept a charge or allow me to get through the backup process without "disconnecting" Any suggestions?

    Hello GreenLantern17,
    It sounds like you are unable to charge your phone and it keeps disconnecting when you have it plugged into your computer, even though you have tried mulitple cables. If you have not already, try charging the phone with the wall adapter that came with it. If it works there,  into I recommend starting with the following USB port troubleshooting for your computer:
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPad, iPhone, or iPod touch.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you have not already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
    If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
    From: iOS: Troubleshooting USB-related alerts when syncing
              http://support.apple.com/kb/TS5254?viewlocale=en_US
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • My iPad2 won't restore from backup

    HELP!
    I have just updated my iPad2 for the first time to the latest update. I bought it in Dec 2011 and it is now May 2014.
    I pressed 'Restore from Backup' but it just continues to keep on going through the same process continuously. I can quickly see all the updated info on my screen momentarily but then that screen disappears and  it goes back to screen that asks for
    'Language'
    'Country'
    'Choose a Wifi Network' and then
    it automatically goes to 'Set Up iPad'
    from here, I have chosen 'Restore from iTunes Backup', and also have the USB cable connected to the iPad
    It then comes up with "Connect to iTunes" which I have now done for the 5th time
    I then go back to 'File', 'Devices',  'Restore from Back Up'
    I know that all the info has been backed up and is on my computer and I can also see it on my computer.
    Frustratingly, I have only twice seen the screen momentarily where it has the updated versions of apps, etc on the screen but when I try to click into anything, it goes straight back to the whole process of restoring from back up again.
    I have rebooted my iPad2 a few times in between as well, thinking that was the problem. 
    Please help.

    I have just redone the whole process again as
    Set Up as new iPad
    I was worried that I would lose everything but it seems to have some stuff on there.  Not quite sure what is missing but I am happy that I can at least use it.
    Thanks anyway

  • Leopard Install-iCal won't restore from Backup.app (.Mac User)

    I have an iBook G4, 1.2GHz, 1.25GB RAM. I backed up all files using .Mac's Backup, performed an erase and install of the system, and set up .Mac sync preferences at startup (under System preferences--all .Mac options were checked, to include Calendars). After installing apps and restoring my iCal files from Backup, I opened iCal, and only the default Home and Events calendars were shown; all my backed up calendars were not shown.
    I appears that you need to disable (uncheck) the Calendar sync preference in the .Mac sync preferences PRIOR to accomplishing the restore steps in the posted solution: http://docs.info.apple.com/article.html?artnum=306482
    After restoring the files, open iCal to ensure that all calendars are in the application. You can then return to .Mac Sync Preferences and select (check) the Calendars preference.
    I also recommend deleting the iCal plist file, located in Users/USERNAME/Library/Preferences/com.apple.iCal.plist
    Deleting this file will restart your initial iCal configuration; this file be recreated at iCal startup.
    Alan

    Hi, I figured it out. Here's step by step on how to do this.
    1) go to "C:\Users\User\AppData\Roaming\Apple Computer\MobileSync\Backup" and make a copy of the folders to my documents (or wherever you like).
    2) sync your iPod with iTunes to get all your apps back onto your ipod (your saved data won't be back yet).
    3) close iTunes
    4) iTunes will have overwritten your old backup, so delete the folders in "C:\Users\User\AppData\Roaming\Apple Computer\MobileSync\Backup" and copy the folders you copied earlier (from my documents) back to "C:\Users\User\AppData\Roaming\Apple Computer\MobileSync\Backup".
    5) open iTunes and restore from backup.
    all your app data should be there and everything back to normal.
    Everyone should make sure that you back up your iPod backups from the backup folder every once in a while, because you could need them sometime in the future if iTunes decides to rewrite over your backup.
    Also, never try to restore your iPod from backup without first backing up your backup (yes, iTunes is crazy). If you do something wrong, the next time you connect your iPod, all your hope of being able to fix it will be gone.

  • My iPod won't restore from backup

    I have an iPod touch 3rd gen 32 gb. I backed it and recovered it, then restored from backup, however, now it is stuck between the lock screen and a loading circle. Is there a way to fix this without recovering it and not restoring it?

    Not likely
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Flash buttons in dreamweaver 8

    Hi, i am having a problem with inserting flash button in dreamweaver 8, when i insert the buttons it appears on the page as a grey box with "F"(flash) and not displaying the proper text. The user is a standard windows users and has not administrator

  • Only black screen on the external monitor with intel-virtual-output

    Hello, I tried to install bumblebee on my Lenovo W520 with this tutorial: http://www.unixreich.com/blog/2013/linu - ly-solved/ I can activate my external monitor with "intel-virtual-output" and the monitor is switching on. But I can only see a black

  • Delete a page in a document

    I have a 2 page document, I want to delete the first page. I tried deleting everything off of it, but it shows blank page. I tried going to the beginning of the second page and deleting, nothing happens. Ipad   iOS 4    

  • Deploying EJBs on multiple nodes

    Hi, Our Application works when we deploy it on a single node. But the moment we deploy it with multiple nodes,we are getting a exception: java.lang.NoClassDefFoundError: javax/xml/bind/UnmarshalException at java.lang.Class.forName0(Native Method) at

  • Problems updating/installing air application

    Hi,   We have an Adobe Air application that uses the Air update mechanism for newer versions. It seems to work fine for most of the customers  but on some computers when it tries to install the new version it cannot. The only clue we have are some er