IPad 2 won't rotate after latest iOS update

Why won't my iPad 2 screen rotate since the latest update to the iOS? It will sometimes rotate after several minutes but not always. I have done all the usual: checked the settings, side button, reset all, etc. I've had it a couple of years and this problem just started after the iOS update. I am ready to throw it away.

iPhone, iPad or iPod screen will not rotate, fix http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
 Cheers, Tom

Similar Messages

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

Slow vpn he speed on iPad 2 after latest iOS update

I have two iPads, an iPad 2 and an iPad 4. I updated both recently with the latest iOS update. Since then my ipad 4 has been fine, but my ipad 2 has been increadibly slow when trying to use a vpn.
I have the same vpn account on both iPads, and have contacted my vpn company and done all they suggested but it just will not work on my older ipad.
My ipad 2 has been switched off, reset, has 8gb memory available, had all other apps shutdown and I am now running out of ideas.
Why has this iOS update affected my ipad2 like this, yet not my 4, and what can I do to try and get it's original performance back, which was fine.
Thanks

Have had the same issue w/my iPad 2. It is an iOS issue. Waiting (an unusually long time) right now to finish today's 7.1.1 update and hope it's fixed! Apple has been aware of this issue, apparently.

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

IBook G4 won't load after latest security update, repair doesn't work?

Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?

*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn

External drive and ipod won't mount after latest security update

I just downloaded the latest security update on my powerbook, and now my lacee external hard-drive won't mount. I ran disc permissions and still nothing. My ipod charges from the firewire port but doesn't mount either. The hard-drive mounts fine on my dome imac which appears to have the latest updates as well. Could it be a problem with the firewire port itself or something to do with the security update? Thanks for the help.

Your PowerBook is hurting my friend. Check "About this Mac" and see if the memory reported is the actual memory you have installed on the machine. I had a PB that had 1GB installed but the machine only read 256. Ended up needing a logic board replacement. Check http://docs.info.apple.com/article.html?artnum=303173 to see if it applies to you.
Unplug all devices from the PB, leaving only power connected.
If it everything seems cool, then you'll want to start up in "single user mode". Restart the PB and hold down the  + s (apple and s) keys until you get a black display with white characters. Once you get the command prompt signified by a # character. At that point type in the following at the prompt
fsck -yf
then hit your return key
As the system check your HD, notice any errors that are displayed. After it is done it will inform you of any modifications, or if it thinks everything is cool.
then again, type in
fsck -yf
then hit your return key
You'll want to have run the fsck -yf utility a total of 3 times. Hopefully at the end everything will be good (No errors) "* appears to be OK".
In any case, type in
reboot -n
then hit your return key
Your PB will reboot. After the OS has loaded, plug in your FW devices and see if they mount. Either way post back with results.
d

Safari won't load after latest software update

After the latest software update from Apple, Safari won't load. I've deleted the p.list and run OnyX to clean the system. It still won't load. This is a pain as Safari is my default browser and I have to get into Safari to change that. Has anyone else had this problem and fixed it?
Thanks!
Quicksilver G4 Mac OS X (10.4.5) 1.5Gb RAM

Welcome Pauline;
Actually you can change your default browser from within Mail, just go to Mail preferences and set the default browser to whatever you want. Unless you have cloned your system (before the update)which I heartily recommend,
you may have to use Pacifist to extract Safari from
the 10.4 installation package.
Hope this helps,
Miriam

Won't Restart after latest Security Update Download.

Yesterday I downloaded the latest Security Update to my Mac Mini with Snow Leopard. It downloaded but would not restart. I finally managed to get it to boot to a bootable external drive and using Disk Utility found the HD was OK but the Preferences way out of wack. I did what I could but when I tried restarting to the original drive it would not work. I just get the white screen with a circle and stroke through it after a minute with the spinning ball. I have tried the original start up Disk, pressing C on Startup, but it just spits it out. I tried to use an older System disk, one for Leopard but it will not see it. I tried zapping the PRAM twice to no avail. Now it won't see the bootable drive either.....
To me it sound like a massive hard drive fail. Nothing to do with the Security update. Your thoughts on this would be greatly appreciated though.....
Thanks,
Stephen

No one on the Apple site could help me so I took it into Tekserve in NYC. I was afraid that I was going to have to replace the entire Hard Drive but they finally managed to get it working. In the end for $60 they reinstalled the System, keeping all of my files intact. I have a bootable external drive, but I was happier not to have to use that. Apparently it was a multilevel problem, and not something anyone can fix themselves. If you look at the Apple discussions quite a few people had problems with that update.....
Best of luck,
Stephen

Yahoo email not updating after latest ios update?

I updated my iphone 5 to the latest ios version yeaterday and ever since my yahoo email will not update unless I go into mail app and refresh it. Is this a bug with the ios update or something with Yahoo mail? I also have a gmail account but it seems to be working ok. Hard to tell though as it does not get as much email. Any help would be apprecaited.

no, you need to actually go to your settings and change it to push data rather then fetch it manually.
Settings>mail contacts and calendars>fetch new data>Push should say on.
and if it says its already on, tap it to turn it off, then tap again to turn it back on.
also, www.downrightnow.com you can see how extremely often throughout the day yahoo mail servers are down.

IMac won't restart after latest Safari update.

I just downloaded the latest Safari update (5.1.2) on my iMac (27", i7, latest Snow leopard). The download (via software update) and install went smooth but when asked to restart, it hangs up at the gray screen...after the blue screen/start up chime, but before the apple logo appears. I tried shutting down and rebooting but it keeps hanging at the same place.
Thank you in advance for any successful solutions!
Kind regards,
Mark

Hi all,
Thank you for the replies...
I did manage to solve the problem right away by following the instructions offered by Apple: Remove all USB cables, then do a hard reboot. Then to isolate the cable causing the problem, plug in one at a time and reboot until the problem happens again. In my case, the issue was caused by a Flip Camera that was plugged into a USB hub.
I hope this helps those with a similar problem.
Regards,
Mark

PowerMac won't boot after latest Apple update

After downloading and installing the latest Apple update I rebooted the computer. The computer doesn't boot up anymore. It starts, I see the grey screen with the Apple on it, the spikes start to spin and then after a minute or so the Apple turns into a circle with a line through it. I have tried resetting the PRAM and reset the SMU, still the same results. I do hear the hard drive spin up, and start to be accessed like usual, but then it stops when I get the circle with the line through it.
Any help would be appreciated. Thanks.

This must be related to the 10.4.11 update. I am able to boot from my other disks with OSX installed in the computer. I have downloaded the patch and tried re-applying it to the damaged installation but it still doesn't work. I don't have a computer with boot camp installed, so I don't know why this is affecting me. I also have a G3-750 that is now disabled due to the update and it only has 1 disk in the system.
Does anybody have any ideas as to how to fix this so I can salvage the installation or do I need to re-install OS X and everything along with it?

Anyone else getting server error trying to set up ipad after latest ios update?

New IOS 7.03 was installed on my ipad2 today and Ive been having issues trying to sign in to my account all day. I finally got my login figured out but now when go through the setup process for the new update, after I accept the Terms & Conditions it keeps telling me "Apple ID cannot be created due to server error".
I'm really getting annoyed with all these updates. Starting to think that purchasing this was money wasted.
Somebody, please help!!! This is ridiculous!
Thank you.

Instead of going through the rest of the setup and logging in, I skipped it and also skipped the passcode. My iPad allowed me to get on to it and enter a password for iTunes. We'll see how long this lasts. Don't know why I didn't think of trying this earlier. Let's keep our fingers crossed.

App problems after latest iOS update

Since most recent update, can't open app store, music or ibooks unless I'm tethered to my computer. I have rebooted several times. My partner is having same issue with a different model of iPad. When will Apple release a fix!?!?!

The passcode settings simply give you the option of having the passcode lock immediately you lock the screen, or after a delay period. If you set a delay the passcode lock will not activate for the period of the delay. I have mine set to one minute. It is a "convenience" measure to save me having to re-enter the passcode if I lock the screen then immediately remember that there was something else I wanted to do. Obviously this entails a small compromise on security and if you are at all concerned then you should set the passcode to "Immediately". It really has nothing to do with the camera short-cut (though loads of users seem to have run away with this notion). It would be the same if you just did "slide to unlock" during the delay period.

17" iMac (Tiger) won't boot after latest software update

I downloaded the latest Tiger software update on my 17" Intel Core Duo iMac a couple of days ago and after I hit Restart I can't get past the grey Apple loading screen.
I've tried everything it tells me in the manual, pressing various combinations of keys as I turn the computer on, but to no avail. I also put Install Disk 1 in and tried to check hardware from that (pressing D) and tried pressing C too to boot from it, but nothing happens, just the grey apple loading screen. Of course, now the install disk is stuck in there too.
Any clues as to how I can sort this out? I'm still under AppleCare, so if worst comes to worst I'll call UK support and see what they can do, but thought I'd try everything I could at home first.
TIA.

Hello,
Try the Apple Hardware Test: http://support.apple.com/kb/HT1509
Carolyn

IPad 2 won't rotate after latest iOS update

Similar Messages

Maybe you are looking for