IPad 2 won't sync after update to 5.1 and iTunes 10.6.0.40

Upgraded iPad2 to 5.1 and Windows iTunes to 10.6.0.40.  iTunes doesn't recognize the iPad as a device, but does recognize the camera.  Tried all iPad troubleshooting steps (restarting both, reinstalling iTunes, tried various USB ports).  Any ideas?

Hi G-whiz,
I solved the same problem (iTunes 10.6.0.40 upgrade on MacBook Pro). iOS  5.1 for iPhone and iPad, not recognised after update, even after rebooting each device in isolation and then all together. Still did not work.
For me the issue was: The MacBook Pro was running BT with wireless kbd and touchpad connected; also I had a large flatscreen running from the mini display connector.
Aiming to minimise any driver conflicts (even if external monitor and BT drivers are not third party), I followed these steps:
1. disabled bluetooth
2. disconnected external LCD
3. rebooted MacBook Pro (wifi still enabled before restart to get to iTunes Store)
4. connected iPad and iPhone to power (before upgrading to iOS 5.1 they had been set to wifi sync when on power)
5. started iTunes
Voila! Devices recognised automagically! And beginning sync instantaneously.
bauhws

Similar Messages

  • Ipad won't sync after updating to snow leopard

    Any help available regarding a non-syncing ipad first gen, after updating to snow leopard on my imac?  The ios software on ipad is up to date, and the snow leopard version is also up to date.  The computer will not even recognize that the ipad is connected.  Thx.

    Try something very simple first. Quit iTunes, reboot the Mac and restart the iPad. Then try again.
    I had some issues when I first installed SL on my last MacBook, and I still have issues every now and then with the iPad not being recognized (now running Lion 10.7.3 on a new MacBook Pro) and this has always worked for me. You may have to reboot the Mac a couple of times - but try it and see if it works for you.

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • IPad Air won't sync after update

    I was still on 7.1.2 on my iPad Air before I upgraded. I made my backup to sync all my apps and everything and then did an update using the restore option and when I choose to restore my back up it takes about 3 hours and after that none of my apps have synced and iTunes is still asking if I want to "set up as new" or "restore from backup" well I have restored from backup about three times without getting any of my apps back. Any one else have this issue or know how to help? Thanks

    If you can, decline both options to restore the backup and set up as new, and just cancel out.  Then eject the iPad, quit iTunes, restart your computer, restart iTunes and then try to sync again. You can't be any worse off than you already are, of none of your apps are syncing anyway. Maybe refreshing everything will allow the process to work.
    IF you still have the backup that you created before you updated, your app data and settings should still be safe in that backup.

  • IPod Won't Sync After Updating to iTunes 10

    Whenever I click sync to add the music that I purchased in the online store, it says that it is syncing the ipod, but then stops and then loads on the ipod screen for it being okay to disconnect. I've reinstalled itunes 10, tried itunes 8 (wouldnt work because library was converted to itunes 10) and it still does this same exact thing where it won't sync my music from the library on my computer to the ipod.
    Help please.

    Since upgrading iTunes I've noticed that not all of my podcasts will sync - one or two are always left out. Syncing again will get the stragglers, but it used to work just fine.
    Another issue, possibly related, is I've seen an accumulation of 'Other' data on my iPod that I can't identify. I'm beginning to think it might be abandoned audio files from auto updating smart playlists that remove selections after they've been played. Doesn't happen with podcasts, though, because that smart playlist refuses to auto update on the iPod.

  • My iPad Won't Rotate after updating to iOS 6.

    After updating to iOS 6, my iPad2 won't auto rotate. I already checked if the rotation was locked, so this isn't the case. I tried restarting it and rebooting it. The only possible way to rotate the screen is to turn off the iPad, rotate the iPad, then turn on the iPad again. Please help me, I don't know how to fix this problem.

    I had same problem post upgrade to iOS 6.1.3
    I went to
      [Setting] [General] and set the
      [Use_Side_Switch_To] option from [Rotation ...]  to [Mute]
    Checked switch by manually flipping the button on iPad cover (next to volume) back and forth and seeing images of mute actions appear sceen centre
    But on checking further not all apps rotated automatically  ... so ...
    Manually closed all open apps by:
      Screen button x2 in quick succession bottom bar appears with all active apps
      Touch and hold on of these apps in this bar untill the x appears on them and the wobble
      Close each one down by touching x
    Then
      Rebooted ( ... just like a Microsoft machine :-)
    Now all working working ... boy you really miss that feature when its not functioning ...
    Dont know if all steps relevant but this is what worked for me ...
    ... best of luck
    Message was edited by: citizenpips

  • Ipad won't start after update 8.2

    after updating my ipad it won't work just stuck on the start screen (the one with the white apple logo) .. i had tried to restart it and re install the update from itunes still the same problem ..

    it's done thank you it back .. ^_____________________^

  • Video won't sync after update to 4.3

    I have a 1st generation iPad, everything worked great on it prior to updating to iOS 4.3. Now, it will not sync any video - no TV, no Movies, not manually checked, not on Playlists. I have turned syncing movies/TV off, then synced, then turned movie/TV syncing on, and synced - no joy. I have reset the iPad, and done a full Restore - nothing. Video just won't sync.
    I've got a Mac running the latest 10.6 and iTunes 10.2.1
    Anyone got any ideas? Thanks!

    I believe I have the same issue as you. It seems that some of my videos will sync; while others will not. I'm not sure what it is about some of the video files that allows some of them to work and the others not. I used HandBrake to convert the videos to AppleTV format and this worked for me up til this recent iTunes/iOS software update.
    I am on iTunes 10.2.1 and iOS 4.3 running on Mac OS X 10.6.6.

  • IPod won't sync after update

    After updating iTunes files were corrupted.  I unintalled and reinstalled according to the instructions from Apple.  My iPod doesn't sync and I my library is gone.  It may be in iCloud but I can't get it to work.  Any suggestions?

    If the iTunes Library file becomes corrupted, iTunes creates a new one (that is empty) and starts using it.  That may be why your iTunes library is "gone."  However, your iTunes media files (such as your song files) are probably still on your computer's drive.  In Windows, do a search on the name of a song that was in your iTunes library.  If you can find that song's file, note its location.  All of your song files are probably along that same path.  If you were using standard settings in iTunes, they are in your user home folder's Music folder, under iTunes and then iTunes Media.  Something like this
    \Users\[your username]\My Music\iTunes\iTunes Media\
    If you can find your song files, you may be able to recover your iTunes library using the procedure described in this document
    iTunes: How to re-create your iTunes library and playlists - Apple Support
    If that is not possible, you can still add your song files to a new iTunes library.  You will lose supporting data such as playlists, ratings, and play count.  After you have your songs in an iTunes library, you can sync your iPod to that library.  NOTE:  Songs on the iPod that are not in your new iTunes library will be lost.  You can reply back, if this is a problem or you have problems syncing your iPod to a new library. 
    Songs purchased from the iTunes Store can be re-downloaded at no cost.  If any purchased songs were lost, go to the iTunes Store.  Be sure to sign in using the Apple ID used for the purchase.  Then, go to the Purchased screen (there is a link to Purchased on the main iTunes Store screen along right side).  You can download (most) previous purchases there.
    If you subscribe to Apple's iTunes Match service, your entire iTunes music library is matched or uploaded in iCloud.  If this is the case, please reply back.

  • Ipad won't start after updating to ios 8.1.3

    My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
    I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
    While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
    Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
    If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
    tony

    Hello, Tony.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPad no long starts after an update and you have a backup for your iPad.  It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete.  The only information that should be missing would be after the backup was completed until the device is restored.  I have included the steps for going through this process in the articles below.    
    If you can't update or restore your iPhone, iPad, or iPod touch
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    -Jason H.  

  • Certain apps on iPad won't run after updating to iOS 7

    Apps like iPhoto, AVPlayerHD and Modern Combat 4 are shadowed and say "installing" after pressing on them. They don't run. I tried to delete them and sync them again over iTunes, turned restrictions off, but nothing seems to work. It all happened after i updated to iOS 7 and ran the backup. Help pls?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings

  • IPod Touch suddenly won't sync after updating app

    I installed an update for an app and now my ipod touch won't sync. The mac doesn't see it and it doesn't even charge when hooked up. It charges fine with the same cable on a wall charger. My son's ipod is fine, I've restarted the ipod and the mac, I've reset the ipod, i've swapped usb's and cables, no luck. I've tried holding down the lock and power buttons. Its a 32 gig model, SW version 3.1.3. Can I uninstall an app? I suspect its tic tac toe free causing the problem

    Welcome to the discussions,
    you can delete the app on your ipod by touching the icon until it starts to shake, then hit the little cross to delete it.
    Did you try to connect in recovery mode to see if it is recognized by your mac? http://support.apple.com/kb/HT1808

  • Won't sync after update 11.1.4

    I can now get itunes to recognize my devices but they won't sync properly. There's no error messages. They simply don't do anything during the sync. I've tried restoring my iPod. Adding a playlist, the entire library and nothing works. Help? I'm running windows 8.1 btw.

    I have the same problem.  Windows 8,1,  Itunes 11.1.4.  IPod Classic 160 GB.
    If I connect the iPod to the USB port, iTunes simply hangs and becomes unresponsive.  I have to unplug the iPod and kill the iTunes process to reset things.
    The iPod is very full.  I've tried deleting albums in iTunes to create breathing room for the sync.  But that doesn't help.
    When they aren't connected, the iPod and iTunes each run fine, but syncing fails.

  • IPod Touch 4th Gen froze on restore after updating to 5.0 and iTunes doesn't recognise my iPod now??

    After updating to 5.0 my ipod is not recognised in iTunes and I lost everything on it. I have attempted several restores but it just freezes and now all I have is a usb plug on the screen and can't use it!! I have tried the holding button thing, uninstalling and reinstalling iTunes, using a different usb port and nothing works. I have even left it to restore over night and it hasn't moved. iTunes is enabled in my firewall and I am running an iTunes diagnostics atm. Help!

    My ipod tunred white screen, but im not using it when it happens

Maybe you are looking for

  • Error while installing oracle 10g on centos 5.6 32 Bit

    Hi All, Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed. [root@staging ~]

  • How to use bean in forms

    i create one form based on emp. then i create beanarea and set its "Implementation Class Property" to oracle.forms.demos.Calendar. i copied calendar.jar from D:\oracle\ds9i\forms90\demos\jars to this lacation D:\oracle\ds9i\forms90\java after i write

  • Set the properties Editor of Add-in for Outlook 2007

    Hi All, I've developed an add-in for outlook 2007, the setup doesn't give any errors but when I open the Outlook the add-in is disabled. May be because is the only add-in with <any Author>. How can I set this properties in visual studio 2010? Thanks,

  • Managed System SLM~ABAP is not configured (Step 10: Configuration Check)

    When I try to spend the last procedure "Configuration Check" (item 10 - Managed System Configuration) I get here is only an error message The definition of Technical System 'SLM~JAVA' is not correct: 'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.

  • JPEG images opened in Photoshop double in file size upon save. Why?

    I've noticed that jpeg files I open in Photoshop (fresh off the sansdisk card) pretty much double in file size (from, say, 3MB to 6MB) after they're saved. This occurs even if I don't change the image size at all and simply save as a jpeg after touch