IPad 3 Blue yeti too much power warning
unable to use Blue Yeti USB mic with garageband on iPad 3 "too much power needed" warning
I have an almost identical problem with a mac mini connected to a Dell monitor usb hub .. eveytime the computer wakes up I get this message, however no usb devices are turned on (other than keyboard and mouse) and the monitor hub is connected to a webcam( not on ) and a printer (also not on ). The problem seems to be the hub because if I connect the keyboard to the hub I need to use the mouse to wake the mac up. I suspect this happens when the dell monitor is off or goes into powersave mode. Once the mac and dell are both awake everything functions normally so the message seems to be erroneous .. I'd just like to stop it appearing ... any Ideas?
Similar Messages
-
I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work. -
HT4101 It says it requires too much power when i connect my usb??
It says it requires too much power when i connect my usb??
Ok. Many USB's trigger the too much power warning. If you have a memory card, try doing it that way. Or you can experiment with other USB sticks. I've literally had a 50/50 success rate with the ones I've tried. You can try another one. Off brands seem to work better, along with smaller ones. The largest I've had work was a 4 gig. Kingston and Sandisk often trigger the too much power warning.
Do you know the naming format to make it work? Have a folder named DCIM in the upper level and make sure that all the photos have a name of exactly 8 characters. -
When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?
1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad -
How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board. I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power.
I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?
-
I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
RegardsI'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad -
When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions
It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information. -
I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.
Or use the camera's SD card instead.
Cheers, Tom -
Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.
Use the camera's SD card.
Cheers, Tom -
Has anyone found a way to download pictures fro Samsung Galaxy 3 phone to the Ipad air? I bought the lightning adapter but I keep getting the message device uses too much power. Any ideas?
You can't directly from a Galaxy phone. But you can certainly upload the pictures from your Galaxy phone to your computer and then sync them to your iPad via iTunes.
-
Ipad2 Camera Connection Kit
When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
What should I do please?
DavidI believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
Cheers, Tom -
HT4101 My ipad says the device uses too much power when I connect my camera
I brought my ipad 2 on holidays and have purchased the camera connection kit. I tried to download my photos and an error message came up saying that the device uses too much power! My ipad is powered up to 100% and I have closed any open files and it still says the same thing? Does this actually work or do I have to return it?
What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?
-
IPad Air - The connected device requires too much power.
When connecting my iDJ Live II to my new iPad Air I receive the following message:
Cannot Use Device
Numark iDJ Live II: The connected device requires too much power.
The iPad Air is running iOS 7.0.4, I also have an iPhone 5S, iPad Mini and iPad 2 all running latest iOS 7.0.4 and this dj controller runs on all these models. I know about the 20mA output limit on these other devices but they all still work why not the iPad Air? What has changed?
I am very disappointed with this restriction as the only reason I bought the iPad Air was for the better processing power and 128gb storage to fit all my music on there to use this dj controller with djay 2 and vjay. Now I have spent $900 on something I can not use as intended.
Please any help would be appreciated.
Thanks
AdamTry giving your iPad a reset. See if it can clear up the error or if it repeats. Hold down the sleep and home keys until it reboots then try again.
How does this device plug in? Via the lightning connector or the USB part of the camera kit? If it's USB then sometimes a powered USB hub can help with the power issues.
If it's lightning then the issue could be related to something that came with iOS7. Due to so many unauthorized lightning cables, iOS7 activated software that looks for a code broadcast by the chip in the lightning connector. Authorized manufacturers have codes that the software sees, unauthorized ones don't. Usually people using unauthorized cables get a specific message, however it could be possible that this new part of the software is affecting other things connected to the lightning port.
Have you looked on djay's site to see if others are having issues or if they have fixes? -
I bought a camera connection kit but fail to connect to my iPad . My iPad prompt me that my attached device using too much power ! I got no problem using the SD connecting kit. My camera is Samsung EX1 , pls advise
Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?
-
When I connect my camera to my iPad I get a requires too much power error message
I keep getting a "usb device requires too much power" error when I connect my external camera to my iPad.
Doing a search on here it looks like other people have the same problem with Sony cybershot cameras. If you have a card reader which doesn't draw too much power then you could try using that with the USB part of the kit.
Maybe you are looking for
-
MacBook Pro (10.7.3) not shutting down after updating to latest iTunes
This is a bit of a strange one, and after searching high and low, I haven't seen any other references to it, so...here goes: I'm working on a MacBook Pro (13-inch, Mid 2010) running OS X 10.7.3, and the complaint is this: the system will not shut dow
-
I have Photoshop CC on my main iMac. I'd like to put it on my backup iMac. Is that possible to do without buying another membership?
-
30,60,90 Days Totals in sql query
Hi All, Here I have written a query to find the total for 30Days to calculate costs.... These 30Days Amount will be populated into another table based on joins. I know we can do by case in the final update but lot of logic is going into temptables1
-
Post invoice with 1p or 2p difference
Dear Experts, I need to post the invoice even if the balance with difference untill 2p. Can you please guide me how to do the same. If this post is in the wrong place,please guide me where to post the same. Thanks, RR.
-
I have no "open with" option for downloads
I click on a file within a website to open it, but the pop up box does not have the "open with.." option, only the save option. The file type is a text document with the extension ".prg" which is associated in my Windows Folder Options to open with W