IPad 3 clock time

I have the iPad 3. Just updated the new software, ios7. The time on my home page at the top shows the incorrect time. The clock icon also shows the same incorrect time. However, when I tap the clock icon, the next page shows the correct time. I am in Baltimore, MD and the time zone of New York is being used. I can't figure out how to correct the home page time. Can anyone help me?

Thank you. I don't know why I did not see that in general settings. Also, it was set to the automatic on selection. When I turned that off, it corrected the time on the home screen at the top. Your help was much appreciated!

Similar Messages

Clock/Timer/Alarm for iPad

I just got my new iPad and am disappointed it doesn't have the iPod clock/timer/alarm. Does anyone know of a good app that will turn my iPad off after a certain length of time? Like if I fall asleep using something on my iPad?

DaddyOFTheMacDaddy wrote:
Check the app store. The one I use most is 'ambiance', but there are several clock (free) apps available that do specifically what you're asking.
Good luck
They don't run in the background.

IPad clock loses time

My iPad clock began losing time last week. I probably had a warranty then.

If you search this forum for loosing AND time you will find several threads discussing iPads loosing time. Those might provide some help.

HT4113 iPad clock settings

Is it possible to lock clock settings? I ask as my business uses an iPad for employee time in and time out.

I'm guessing that some employees are changing the clock time to show more work hours.
Have you tried locking (only you would know the passcode to unlock) the Settings app using Restrictions? If successful, it would lock the Clock but also restrict using all settings, which could be bad.
 Cheers, Tom

Can I backup my iPad with Time Capsule

I have recently set up my new TC and need to know if it can be configured to automatically backup my iPad. I rarely use anything other than my iPad.

No. An iPad cannot backup to a TC. iTunes backs up the iPad. Time Machine will backup your iTunes folder and all other relevant folders to the TC.

Digital Clock Time is not display present time

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Flash Flip Clock Timer

Hi all,
I am looking to develop a flip clock timer to place on a
company website to show when some software will be made available
(basically a release count down timer). I have seen a similar style
of what I am looking to do
here.
Although the one I want to create should count down not display the
time.
The reason for my post is I have no idea where to start and
was hoping someone could point me in the right direction to a
tutorial or provide a small sample fla.
Kind regards
David.

that's going to require some advanced scripting and i don't
know of any tutorials. i made something similar with numbers
flipping like an old-time scoreboard.
you'll need to tween the _yscale and _y property of the
number lower halves to give the appearance of flipping
numbers.

How do i make a clock/timer that can be reset to zero?

I need to make this clock/timer to run my control off of. To be more detailed I need to ouput a steadily increasing voltage slowly over a period of time. I have my DAQ assist set up to output a voltage to my device but i can't figure out how to make the timer/clock correctly.

It seems you simply want to update the ramp at a constant dt, why would you need to reset anything?
There are two main ways to do this:
software timed: use a loop with a given delay and write single points to the output.
hardware timed: setup timing for your task and send the entire ramp to the hardware. It will do the rest. No extra code needed.
LabVIEW Champion . Do more with less code and in less time .

Watch movies on ipad from time capsule

Hi
Which app can i juse to watch movies on ipad from time capsule?
- Eirik

not sure how time capsule handle it's NAS features but my NAS can be reached by all upnp clients in app store so I can access the data stored on it

ESS Timesheet error with Clock Times

Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood

<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha

About +ive Time Mgmt with Clock Time .

Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

Hi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022     Overtime hours that exceed approved overtime
u2022     Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ

Problem on Oracle11g2 RAC -- PRVF-5424 : Clock time offset check failed

I have a lot of file core wrrote every 6 hour and the same time of alert"node".log file show error about PRVF-5424 : Clock time offset check failed.
Yesterday I use this:
[root@hostname2 ~]# service ntpd stop
[root@hostname2 ~]# ntpdate
[root@hostname2 ~]# service ntpd start
in order to resolve but today the problem re-begin?
2013-04-17 20:23:06.063
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of 69695.6 that is beyond permissible limit of 1000.0 from NTP Time Server "******"
PRVF-5413 : Node "" has a time offset of 69940.6 that is beyond permissible limit of 1000.0 from NTP Time Server "**
2013-04-18 02:23:08.973
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -1826.9 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1364.2 that is beyond permissible limit of 1000.0 from NTP Time Server "1**
2013-04-18 08:23:16.093
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -2698.5 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1998.7 that is beyond permissible limit of 1000.0 from NTP Time Server "1***

What is your OS name and version ?
In general you can solve these issues by configuring NTP service running on your cluster nodes to be synchronized with other NTP servers. For example on Linux please read "Oracle RAC and NTP" in http://www.oracle-base.com/articles/linux/linux-ntp-configuration.php#oracle-rac-and-ntp.
Edited by: P. Forstmann on 18 avr. 2013 13:35

I want open a hotspot I have three iMac and 2 iPad 2 but I want control all the devices in my iPad like time and what they are watching?

I want open a small hotspot I have three iMac and two iPad 2 but I would like to control everything from one iPad like time and what they are watching o copies too. What can I do? Please help me guys

Home Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC

Report governor? (CPU time, clock time, # rows, etc?)

Is there any sort of report "governor" function available in the
Reports Server or 9iAS (Portal) interface to the reports server
that would let me stop a report once it had used up a certain
amount of database CPU time or simply ran for too long ("wall
clock time")?
For certain times of the night (during data loads, etc.), I need
to be able to restrict some or all of our users from taking over
the CPU by running too many reports concurrently, reports with
too broad a set of parameters, etc. The SRW.SET_MAXROW
procedure might help a bit, but ideally I'd like to be able to
control this without having to change each report. (Also, I'd
like to be able to control this on a user-by-user, group-by-
group or time-of-day basis.)
TIA for any suggestions anyone can offer!
- Bill

hello,
there is no feature in oracle reports but you might look into
the database features, they might have something like that.
regards,
the oracle reports team --pw

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.2mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out.

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.

Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.

HT1695 I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now?

I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now? This is the only wifi network I have...

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPad 3 clock time

Similar Messages

Maybe you are looking for