IPad 3 Headset (Jack?) issues

Figured I would see what anyone else thinks. I consider myself to be pretty darned knowledgeable about iDevices. I have been inside iPhones, iPod touch, iPads. I can normally fix things easily. This one has me a bit worried
I bought an iPad 3 when they were released. I bought it at Walmart for some odd reason (never again). So when I checked out, the woman asked if I wanted to buy the protection plan. I said no, because I always get applecare+. She replied that it was the same as applecare, and I told her that I doubted it. I said that if I have an issue with my ipad through applecare, I just get a new one. She said you get the same thing here, but instead of driving 2 hours or shipping it off, you can come in here and get one. I decided to try it, and needless to say, it was not anything close.
The headphone jack on the iPad started doing something where when a set of headphones are plugged in, it would freeze up and then reboot, and get stuck on the Apple logo. Then it started ruining headphones within 2 weeks. No matter how many we bought, it would short them out or something.
So, I tried to take it back to WM, and they said they were not responsible, and that I needed to contact an outside source. I did, and they had me ship it off to be repaired. It came back, and you could tell that someone just like me had repaired. As a matter of fact, I could have done a better job
Never the less, it came back and the headset jack seemed to work. However, it is already starting to do the same thing. Assuming that they actually replaced it like they were supposed to, then I assume that it has to be something else. Since it worked at first, I guess they did replace it. I can replace the jack again, and just see, but I feel there might be another problem elsewhere.
Moral of the story, is DO NOT BUY WALMART extended service plan. I think that the lady was not lying to me, but ended up selling me the wrong plan. After some research, it is apparent that Walmart has 2 levels. First level is the service plan ($79), and then a replacement plan ($99 I think).
I will be fixing it this time

Similar Messages

Headset jack issue

Anyone have a problem with the headset jack? I've noticed that if you insert a 3.5 jack in all the way, it doesn't seem to work properly. You almost have to insert the jack in all the way, and then move it slightly out. If you do this while playing music, the music pauses. If you are on a call, you get disconnected.

The headphones I use are the ones right from Verizon. I get a 25% discount on accessories through my place of work, so it makes it affordable. I bought them when I got the phone.
Verizon Wireless Exclusive
"In Ear - "Ecoustic" ECO DOG STEREO Headset - 3.5 VZW Stereo connector w/CAE feature"

Headset Jack issues with my droid razr

The 3.5 mm jack on my Razr is loose. I tried to see if this is a known issue, but didn't find anything pertaining to my particular problem on the forums as it works but is loose. The only post I found the jack didn't work at all.
The problem is that when I have the phone connected to my car radio via a cord, if I go over a bump or turn or even stop suddenly, and the phone moves even a tiny bit, the jack moves and the program will pause. If I am listening to music while walking with the phone (I usually have it attached to my pants) the same thing will happen if I even just touch the cord. It's not my headset as I can plug it into my computer speakers and have no problems. Also when I have the headset plugged in and I get a phone call, the other person hears a clicking noise. My mother finally told me about it after several phone calls where she couldn't hear half of what I was saying!
I took the phone to a store (since I pay for the replacement plan and the phone was not even a month old at the time) and was told by the very bitchy CSRs (well one was really nice but she had to go to the other ones, and they were first mean to her then wouldn't listen to what I was saying). They tried it out with one of their single earphone headsets which worked ok.   Eventually I just gave up and left as they couldn't seem to understand that MY MUSIC was being constantly stopped. When I called customer service they said they could replace the phone, but I wanted to see if this was a known issue with the phone (and so any replacement phone would have the same issue).
I found my way to these forums and discovered that if I get a replacement phone it would be a REFURBISHED one. So.....continue to have to turn my music or audible books back on after they get paused by the slightest movement of the phone or run the risk of getting a piece of **** refurbished phone as a replacement?
Anyone else have the same issue with the jack? Did you get a decent replacement? Was it worth the time and trouble to replace it?

Gaile wrote:
The 3.5 mm jack on my Razr is loose. I tried to see if this is a known issue, but didn't find anything pertaining to my particular problem on the forums as it works but is loose. The only post I found the jack didn't work at all.
The problem is that when I have the phone connected to my car radio via a cord, if I go over a bump or turn or even stop suddenly, and the phone moves even a tiny bit, the jack moves and the program will pause. If I am listening to music while walking with the phone (I usually have it attached to my pants) the same thing will happen if I even just touch the cord. It's not my headset as I can plug it into my computer speakers and have no problems. Also when I have the headset plugged in and I get a phone call, the other person hears a clicking noise. My mother finally told me about it after several phone calls where she couldn't hear half of what I was saying!
I took the phone to a store (since I pay for the replacement plan and the phone was not even a month old at the time) and was told by the very bitchy CSRs (well one was really nice but she had to go to the other ones, and they were first mean to her then wouldn't listen to what I was saying). They tried it out with one of their single earphone headsets which worked ok.   Eventually I just gave up and left as they couldn't seem to understand that MY MUSIC was being constantly stopped. When I called customer service they said they could replace the phone, but I wanted to see if this was a known issue with the phone (and so any replacement phone would have the same issue).
I found my way to these forums and discovered that if I get a replacement phone it would be a REFURBISHED one. So.....continue to have to turn my music or audible books back on after they get paused by the slightest movement of the phone or run the risk of getting a piece of **** refurbished phone as a replacement?
Anyone else have the same issue with the jack? Did you get a decent replacement? Was it worth the time and trouble to replace it?
Did you have the Cord that was attached to the Razr in a position were it was a little loose or was it tight ? if it's breaking up at the Jack it there could be a Break in the Module it's in. The Camera, Earphone Jack an External Speaker are all part of this Module on top
When you have like your headphones attached an i would do this Gently can you move the jack around if So i would say it has broke a way from the Board..
You can See in this Picture's the Earphone Jack, Rear Camera, an the Speaker in the Combined Module..

IPhone 3G headset jack not working

HI,
The headset jack of iPhone 3G suddenly started playing up. I can listen to music without any hiccup, can hear the other person loud and clear but people complain of a lot of static noise at times and at other times they cant hear me at all. I have personally tested this scenario.
Now to troubleshoot I plugged in my Bose headset which works fine. Hence I asked for a replacement of the headset which came with the phone. Inspite of the replacement the problem remained.
Then I checked out the new headset with other phones having 3.5mm jack and it worked fine.
This confirms that the jack is the problem. I tried to clean it with a clip but no dirt came out at all.
I tried blowing some compressed air into it but to no avail.
Now in India the only support available for the iPhone is through the cellular service provider (Airtel in my case). But those guys understand nothing about technology and have not been able to help me out with cleaning the port.
The only option left for me now is to send it to the Apple support center through Airtel which leaves me without my phone for at least 7 days. The rest of the phone works just fine.
Is there any other solution to this problem other than sending it to Apple for either a repair or a replacement?
Thank You,
P.S: I know that this topic has been discussed but not the exact problem. Appreciate any answer.

Thanks mate. Just found out another weird issue! There are headphone jacks which have 2 rings around the jack and others which have 3. My iphone works well with the ones with 2 rings (infact the new in-ear headphones are the ones with two rings around the jack) but not with the ones with 3. This is true for other 3.5mm jacks. Checked that out as well. Do you think it could be an issue with the 2.2.1 firmware?
Thanks

IPhone 3GS headset jack out of spec?

I have been experiencing problems (similar to some of the other posts) when I try to use Apple's standard headset and three other third party headsets with my 3GS.
When I plug the headset in, people can hear me, but I can only hear them faintly. If I pull slightly up on the jack, I become garbled to other people, but I can hear them clearly.
The same headsets that I have tested work on 3G iPhones.
It's my belief that the headset jack in the 3GS is out of spec.
I have gone in to the Apple Store and have received two replacement 3GS phones to verify that it was not something unique to my first phone. I am now convinced that there is a definite hardware issue that needs to be addressed.
Any help that anyone could provide would be appreciated.

Thanks for your suggestion. It's definitely not a volume issue.
I've been using the original iPhone exclusively with wired headsets since the very first phone was released. I finally upgraded to the 3GS when it was announced, skipping the 3G rev. As such, I'm super familiar with the functions of the phone.
It seems to definitely be an issue with the jack itself, as I have now tested it independently on 3 phones, with 3 Apple headsets (the one that shipped originally with my phone and the new Apple/Bose headset, and with a headset that shipped with a 3G phone). As well, I've tested with two third party headsets - one made for the 3G and 3GS and one that works on my old iPhone via a TTY adapter.
I'm really hoping that I can get some feedback from Apple directly as I don't know of any simple resolves for a hardware issue that has shown up on 3 phones and repeated on two unique trips to the Genius Bar.
Btw, while I was in the Apple store recently at the Genius Bar, the person behind me showed up with the same problem.

HP Envy Headset jack compatibility with stereo headphones equipped with 3 ring plug

Hello.
As you know, new HP Envy laptops are equipped with just single audio jack (TRRS type). In "Maintenance and Service Guide" this one is mentioned as "Audio-in (mono microphone)/audio out (stereo headphone) combo jack".
So if I connect my stereo headphones that are equipped with 3-pin plug (TRS type) directly to this Combo Headset jack will these get recognized by system as stereo headphones (not as headset)? Can stereo headphones with 3-pin plug cause any damage to laptop hardware if connected?
What is confusing me is that in User Guide one can read following Note:
"Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone)".

Hi Misuser8,
The manual does support a 4-conductor connector. After some research I have read that the 3 will work with no complications.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Treo 750. ghost headset jack

dear sirs
i have the 3th treo 750 with the same problem. (the others 2 were replaced by the tecnical service of my country.)
the problem that seeks me is the "ghost headset jack" which causes that if you want to hear, you must use a headsert or the blue tooth.
cuestion; is there some software to solve this??? i want to avoid al the papers and time i have to wait until another replacement.
thanks
Post relates to: Treo 750 (Rogers)

Hello eduardomartinez, Welcome to the Palm Support Community.
Please see this thread in the Audio, Photo, and Video section of the forum:
http://forums.palm.com/palm/board/message?board.id=video_and_photo&thread.id=6135&jump=true
This is often a very simple fix.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Brand New iPad Mini WiFi ISSUES

So I bought my iPad Mini 32gb a week ago and I've been using it eversince with my house's wifi. I recently updated it to iOS 6.1.3 and a couple of days after I started having WiFi issues. So I connect to my wifi and use it as usual, but after 5 minutes of using it the internet stops working eventhough it still shows the 3 bars of internet on the top left corner next to iPad. To fix this I have to turn off my iPad every time. I am trying to see if there is a solution or if I will have to send it to the apple repair center or change it for a new one for 40 bucks. I really need internet on it so please help. ( IT IS URGENT.)

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Some Photos Not Syncing to iPad 1, but issue is not the photos.

Some Photos Not Syncing: When syncing iPad1 64gb IOS 5.0.1 w/HP desktop, some but not all jpgs sync from a folder. (There is ample free space on the iPad.) The issue is not the photo files as I have verified that the jpg's are all compatible both through Adobe CS5 and by successfully getting the photos to sync to the iPad by making a copy of them and placing this duplicitous copy in a 2nd temporary folder, which then sync's all the jpg's to the iPad just fine. Still, it makes no sense why they won't all sync from the main photo folder.
[Folder structure is: Sync My Photos Folder; Subfolder 1 syncs all; Subfolder 2 syncs some; Subfolder 3 syncs all. But if I add a new Temp Subfolder 2a and copy non-syncing photos in it, then I am able to sync all teh photos.]
This is a very inconvenient situation, and it wastes space on my desktop harddrive as I have to have all the photos in the main folder--not the temp folder--to which they ar assinged. Has anyone else encountered this, and is there an explanation or solution for this issue?
Thanks.
jdb95

Try deleting the photo cache > iTunes: Understanding the iPod Photo Cache folder

Is the 3.5 headset jack for handsfree & headphones

Samsung Galaxy Note II - Sorry, but here is a really clueless question. Is the 3.5 headset jack used for both hands-free connections and earphones for MP3?
Thanks,
Ed

I asked because I don't know for sure. I'll contact Samsung Monday.

Ipad 2 wifi issues

Hi
I'm having problems with the wifi on my ipad 2, for the ipad to connect to the router i have to place it directly next to my router and it will connect with no problems but trying to connect to the router more then 1 metre away from the router the ipad doesn't find the router at all. This being my first ipad I just thought it was the way they are only for my brother to bring his ipad 1 to my house his ipad not only connects instantly to my router from anywhere in the house but also finds another 5 wifi connections. If I was to use my ipad upstairs in the room directly above the router it will stay connected for about 5 minutes and loses connection and I have to go down stairs and place the ipad2 next to the router for it to connect again where as my brother slept in the bedroom furthest away from the router and found the router and connected straight away and stays connected!
Is there something different in the way the ipad2 has been built or do you think I have a problem with my ipad?
I would appreciate your thoughts and comments.
Thanks
Gary

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How do I open the headset jack cover ?

I am really struggling to open the headset jack cover on the Xperia z Tablet... where do I put my fingernail and which direction does it open ? Thanks !!!
Solved!
Go to Solution.

Hi Koko,
welcome to the Sony Xperia Support forum..
If look at the headphone cover you should see a small gap using your finger nail you should be able to flip the cover out..
See image below, although not the headphone port, it should give you an idea of what the small gap should look like..
Edit: seems I was to slow in typing my reply..

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I prin e-mails using iPad 3

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I print e-mails? Thanks.

In the email you want to print, on the top right there is an arrow. Click that and an option should appear that says print. That should work. Have you already tried that?

Hi, I have an ipad 2. Issue is. My p.c got stolen and i got a new one. Now is it possible for me to sync my music to itunes on my new laptop from my ipad?

I have an ipad 2. Issue is. My p.c got stolen and i got a new one. Now is it possible for me to sync my music to itunes on my new laptop from my ipad?

Check out this user tip from TuringTest:
https://discussions.apple.com/docs/DOC-3991
and this page on "How-to Geek":
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Regards.

IPad 3 Headset (Jack?) issues

Similar Messages

Maybe you are looking for