Ipad 3 is not starting
Hello,
since this morning my iPad 3 is not starting up again. Just have a black screen.
Tried already to load battery with several plugs & different sockets without any success.
No reaction from the iPad anymore.
Anything else which could be done ?
Many thanks in advance
Ralf
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
MY ipad will not start. I can only see an apple in the center.
Have you tried this?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
HT4623 my ipad will not start and i get a itunes message with a plug and music note symble
My ipad will not start up and i get a plug and music note symble displayed what can i do I already tried the soft boot
You are in Recovery Mode; follow the instructions to recover iPad.
http://support.apple.com/kb/ht4097 -
My iPad does not start. What can be the problem
My iPad does not start. What can be the problem
Does anything happens when you try to switch it on ? If not, then assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
HT201274 My ipad will not start
My ipad will not start.
I have to do a hard reboot inorder for it to turn off.
It just get the start white apple and then it restarts after a few minutes.
I also cannot access the ipad via itunes and therefore I cannot do a restore. I could access it before the problem happened.
This occured after I updated an app and did a reboot. The update never completed itself (Flipboard)
The itunes is the lastest version.Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My mini ipad will not start up at all just black screen
my ipad will not start up
Tap the word Genius Appointment in Kappy's answer, it's a link. Or you can call the nearest Apple Store.
Try a reset first. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. -
Help!!!!!! My wife's iPad will not start up. I updated two nights ago to the latest IOS and today it will not do anything. It is charged and I've tried to access it through itunes to no avail.
From your text, it's difficult to determine if the problem lies with the iPad or the cable.
If the iPad still works, but you're having a problem with the sync, you may want to check all the cables and connections. If the iPad doesn't work (frozen or unresponsive), post and we'll go through the checklist together. -
My ipad will not start what are my options
my ipad would not start up, what should i do? Can i get help from online?
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My ipad will not start up, it has the swirl in the center of the screen and has been there for 30hrs now, what can I do?
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
-
HT201210 While restoring it shows unknown error and exits. Now the ipad does not starts
I tried updating OS from 4.3.1 to 6.1
After downloading it shows preapering for restore
then it quits saying Unknown error
Now the ipad does not starts.
It show only an Apple sign and a status bar.
Noting happens when i press power button
What to do??Sounds like you need t orestore the iPad with iTunes: http://support.apple.com/kb/ht1414
-
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
I have an iPad 3 or the new iPad with the normal charger.. my iPad is not starting is there any way to format it? if not will the apple guys be able to access my data?
Honestly, I don't think that they have any other way of accessing anything on the iPad than any other user has. The Apple Store genius will just put the device through the standard troubleshooting steps - in your case probably try to restore the device to factory settings and if that doesn't work, then they will make some sort of offer for a replacement assuming that your iPad is still under warranty.
If I'm not mistaken they will probably erase the device in order to try to "fix" it. That's what restoring to factory settings does. I assumed that you were concerned about losing data - but if you are concerned that they are going to see something that you don't want them to see or access, I'm pretty sure that's not going to happen. -
My iPad is not starting, it just shows an apple icon. what should i do?
my iPad is not starting, it just shows an apple icon. what should i do?
IF THE RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Dear Sir
I updated my itunes while my ipad was connected to the desktop. Now my Ipad does not start. I get a screen with the icons for CD under it written iTunes and arrow; and connection cable?
Please help me on the same.
ThanksRestore help here. iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
-
ipad will not start up, keeps shutting down and trying to restart, but never gets past the apple logo. The computer will not recognize it as a device that is connected to try and restore.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
i have to create an open slaes order in AFS, with multiple line items and then for each line item, there will be multiple schedule line items,, can anybody help me with this,, any sample program????
-
How can i update my ipod on a new laptop without losing everthing?
I want to update my ipod touch 4th gen. to ios6 but i don't want to lose all my music as itunes indicates that it is only possible to preform a update after clearing the hard drive. Does anyone have an idea how i'd be able to update my ipod and keep
-
How to add a button to an alv standar report
Hi all, I've got a requiremnt to modify the behaviour of the edit button of the ALV in TX vfx3. When the edit button pressed, the requiered behaviour is to navigate to a Z TX. Is it possible to edit the ALV without creating a new Z alv? Just changing
-
Retrieving the drop down value used in wdr_select_options for default
Hello Experts, I populated drop down using the method add_parameter_field by using WDR_SELECT_OPTIONS component. Now my requirement is I need to default the value in some other parameter field based on drop down selection value.But the problem is WDD
-
Plant on release strategy - Purchase requisition
Hi, I have release strategy for one purchase organization. Now, I created another release strategy, for another purchase organization. Both purchase organizations have the same plants. But in the second purch org, in some plants, the release strategy