Ipad 3 locks up when typing in gmail since loading ios 8.  Any solutions?

ipad 3 locks up when typing in gmail since loading ios 8.  Any solutions?

Hey JoeiPod14, The battery meter whether you use the icon (which is better and uses less power) or the percentage, shows you the battery life remaining based on current power use. In others words as Illaass has stated it will fluctuate wildly. Example: You turn on your iPod it shows 90%, start gaming, let's say it's an online, high end graphics game. Your percent drops quickly to 65%, then you stop the game and start listening to listen to music on your iPod and the percent goes back up to 80%. In each case, the battery meter is showing you how much battery you life you have based on what you were doing at the time. Bottom line the harder the iPod has to work, the less time you will have to work / use it before the next charge. (I know-- duh!) Think of your battery meter as a gas tank gauge, it does not tell you when or where you will run out if gas or this case power only that it is close, if near empty. Oh, your question why it drops, even when I the charger, I assuming your iPod / iPhone was a sleep, powered down-- not working the CPU very hard, when you wake the device up there is power draw, so you see the fluctuations you have described, once the power surge stabilizes you get the current percent. Hope this helps. Cheers.

Similar Messages

  • My new iPad air 2 constantly locks up when typing, touchscreen or anything...even writing this question it did it x3

    My new iPad air 2 constantly locks up when typing, touchscreen or anything...even writing this question it did it x3

    Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. Cheers Brian

  • When typing in GMail (firefox and thunderbird) keyboard randomly uses foreign characters like it has been set to another language, but setting is eng

    When typing in gmail (firefox) or thunderbird, randomly foreign characters will be produced like the keyboard has been set to spanish or french, but it is set to english, and the character encoding is set to what it is supposed to be. Web pages appear correctly.
    Application Basics
    Name
    Firefox
    Version
    10.0.12
    User Agent
    Mozilla/5.0 (Windows NT 5.1; rv:10.0.12) Gecko/20100101 Firefox/10.0.12
    Profile Directory
    Open Containing Folder
    Enabled Plugins
    about:plugins
    Build Configuration
    about:buildconfig
    Crash Reports
    about:crashes
    Memory Use
    about:memory
    Extensions
    Name
    Version
    Enabled
    ID
    F5 Networks Host Plugin
    7000.2011.0910.0354
    true
    {DBBB3167-6E81-400f-BBFD-BD8921726F52}
    IE Tab 2 (FF 3.6+)
    4.12.22.2
    true
    {1BC9BA34-1EED-42ca-A505-6D2F1A935BBB}
    Microsoft .NET Framework Assistant
    0.0.0
    false
    {20a82645-c095-46ed-80e3-08825760534b}
    Skype Click to Call
    6.5.0.11422
    false
    {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Modified Preferences
    Name
    Value
    accessibility.typeaheadfind.flashBar
    0
    browser.places.smartBookmarksVersion
    2
    browser.startup.homepage
    http://ca.search.yahoo.com?type=386496&fr=spigot-yhp-ff
    browser.startup.homepage_override.buildID
    20130103094221
    browser.startup.homepage_override.mstone
    rv:10.0.12
    browser.tabs.warnOnClose
    false
    dom.ipc.plugins.enabled.npietab2.dll
    true
    extensions.lastAppVersion
    10.0.12
    gfx.blacklist.layers.direct3d9
    2
    keyword.URL
    http://search.yahoo.com/search?fr=greentree_ff1&ei=utf-8&ilc=12&type=386496&p=
    network.cookie.prefsMigrated
    true
    places.database.lastMaintenance
    1358793548
    places.history.expiration.transient_current_max_pages
    51968
    privacy.cpd.siteSettings
    true
    privacy.sanitize.migrateFx3Prefs
    true
    privacy.sanitize.timeSpan
    0
    security.warn_viewing_mixed
    false
    Graphics
    Adapter Description
    NVIDIA GeForce 6150 LE
    Vendor ID
    10de
    Device ID
    0241
    Adapter RAM
    Unknown
    Adapter Drivers
    nv4_disp
    Driver Version
    9.1.4.8
    Driver Date
    8-16-2006
    Vendor ID (GPU #2)
    00ad
    Device ID (GPU #2)
    00ad
    Adapter RAM (GPU #2)
    Unknown
    Adapter Drivers (GPU #2)
    Unknown
    Driver Version (GPU #2)
    2.1.3.0
    Driver Date (GPU #2)
    1-1-2007
    WebGL Renderer
    Google Inc. -- ANGLE (NVIDIA GeForce 6150 LE) -- OpenGL ES 2.0 (ANGLE 0.0.0.809)
    GPU Accelerated Windows
    0/1. Blocked for your graphics driver version.

    It is possible that you have switched the keyboard layout by accident.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://support.microsoft.com/kb/306993 - HOW TO: Use the Language Bar in Windows XP
    * Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application
    * The default key combination to rotate the layout is the Ctrl+Shift or Alt+Shift combination that Firefox uses for some menu items
    * To avoid an unintentional switch, assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
    * Control Panel > Regional and Language Options > Languages > Text services and input languages > Details > Key Settings > Change Key Sequence

  • The front camera on my iPad locks up when I try to use it.

    The front camera on my iPad locks up when I try to use it.  The entire camera app locks up until I do a reset in settings.  I have done the manual reset as well as a restore and it still locks up.  I want to use Facetime and Skype.  How do I fix?

    If you restored the iPad to factory settings and the camera still locks up, you may have a hardware problem and it may be time to get Apple involved.
    If it was just Skyoe, I would suggest deleting the app and reinstalling, but you can't delete FaceTime.
    Can you use the camera otherwise - meaning to take photos and videos - front and back facing both work?

  • My ipad locked up when searching internet

    my ipad locked up when surfing internet

    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • TS3694 Ipad  locked up when doing iOS upgrade .  Screen shows iTunes logo and connector    . Any suggestions on how to reboot/ restart

    iPad locks up when doing iOS upgrade. Screen shows iTunes icon and connector. System will not power up or restart. Any ideas?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Since loading iOS 8 my e-mails do not appear on my locked screen.

    Since loading iOS 8 my e-mails do not appear on my locked screen.

    Hey brianfromkirkcudbright,
    Thanks for the question. Let’s check your notification settings for the Mail application, we’ll want to make sure that “Show on Lock Screen” is enabled for the specific account (ex. iCloud):
    iOS: Understanding notifications
    http://support.apple.com/kb/HT3576
    Troubleshooting notifications
    Verify that the app supports notifications.
    After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notifications to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    Thanks,
    Matt M.

  • I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    Welcome to the Apple Community.
    Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

  • My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

    my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

    Rebooted computer works now ok

  • My ipad locked up when trying to send a large video file. I tried to turn it off and it's stuck. What so I do?, My ipad locked up when trying to send a large video file. I tried to turn it off and it's stuck. What so I do?

    My ipad 2 has locked up when trying to send a large video file. What do I do? Is there a reset button.
    Thank you

    Assuming that it's not still trying to send the video, then you could do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How do you turn off the mail preview pop ups, that appear when you open mail since downloading iOS 7?

    Since downloading iOS 7, whenever I open the mail app, I am getting pop up previews of all the unread mail that I have asking me if I wish to either dismiss, or read the message. When I have quite a few emails, this can be an annoying, & time consuming task, which is totally unnecessary, as because I am opening the mail app, of course I am going to read or dismiss the emails.

    Since downloading iOS 7, whenever I open the mail app, I am getting pop up previews of all the unread mail that I have asking me if I wish to either dismiss, or read the message. When I have quite a few emails, this can be an annoying, & time consuming task, which is totally unnecessary, as because I am opening the mail app, of course I am going to read or dismiss the emails.

  • My iPhone 4S in useless since upgrading to iOS6, any solutions

    Since upgrading to iOS6 my iPhone 4S is useless, calls are being disconnected and also the phone is often failing to dial out, is apple going to bring in any solutions? Maybe it's time to start looking to another phone company.

    I also am having severe troubles since the upgrade, I posted the following but no one ever responded.
    Kathgrissom
    Oct 9, 2012 2:02 PM
    Let me start by saying I have been searching these threads for a week for an already posted answer and tried all suggested remedies with no results.
    My specifics,
    After a couple days ignoring the pop up to upgrade my iPhone 4CDMA to iOS6, I accidentally clicked to upgrade now button. When it finished my phone shut off, restarted with a time and date of 12/31/1969, searching for carrier signal, no wifi, all 300 contacts gone, along with all notes, reminders and text history. Within a minute, with my jaw hitting the ground my phone once again shut off. Then came on. Kept repeating in this manner.
    What I've attempted so far,
    The only way I am able to get my phone out of this constant boot loop in order to attempt anything is to plug it to my mophie or wall outlet. It still reboots repeatedly but will remain on for periods lasting up to six  or seven minutes before shutting down again.  My PC runs on winxp, I first updated to the current version of iTunes before connecting via USB, not a hub, followed the prompts t restore and as soon as the iTunes begins the process my computer crashes. Did this three times. Went to a friends with win7, could not get iTunes to recognize my phone at all. Went to another friends put my device into DFU when iTunes recognized it restore failed cuz my connection doesn't last long enough to complete. I then manually installed the .ipsw and tried it that way thinking it might be faster but it wasn't fast enough. I'm past warranty, I don't have Apple Care, I don't qualify for another upgrade until Nov 24 besides which a new phone doesn't resolve my lost data.
    Can anyone help me?
    iPhone 4, iOS 6, Upgraded killed my phone.
    I have this question too (0) Reply Tags: help, upgrade_and_problem, ios6, upgrade_woes

  • New ipad skips letters when typing

    When I am typing on my New iPad's touch screen, some typed letters are dropped. I hear the key click and I see the key icon darken, but the typed letter is not displayed. This happens in about 1 out of 10 letters typed. I am typing with one finger.
    This does not happen when using the touch screen on my iPhone, just on the iPad.

    Reboot the iPad and see if that helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • IPad locked up when updating operating system?

    When updating my iPad my screen locked and now shows iTunes logo & charging cord plug?

    Restore from iCloud Backup (you will probably start from step 11)
    1. Settings>General>Reset>Erase all content and settings
    2. Tap Erase
    3. You'll see Apple logo and progress bar
    4. Hello
    5. Slide to set up
    6. Set language
    7. Set country
    8. Choose Wi-Fi network; enter Wi-Fi password
    9. (a) Use Location Service (b) Don't Use Location Service
    10. Select option
    11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    12. Selected Restore from iCloud Backup
    13. Enter password for iCloud
    14. Agree to Terms and Conditions
    15. Setup Apple ID
    16. Select backup
    17. Restoring from iCloud
    18. Hello
    19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
    20. Continue
    21. Finish setting iCloud enter Password
    22. Updating iCloud settings
    23. Create a Passcode
    24. Welcome to iPad
    25. Get Started
    26. Restoring Apps and Media
    27. Enter Apple ID and Password
    28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
    29. Connect iPad to iTune to sync with computer
    30. Sync Music, Videos and Album Artwork

  • Problems placing graphic into table cell. It makes the iPad locks up when previewing that page.

    I have 3 table cells that need a jpeg graphic placed into them.
    I can paste a grahic into a table cell, but when i try to preview that page on the iPad, ibook shuts down. I must be placing the graphic wrong or formats are wrong, like object wrap or "inline" "floating" or "anchored". the graphic shows up in the fill once I copy and paste into the cell, but it doesnt show up when I look at the file info in the inspector. Also, once I preview the iBook author project on my iPad, that page will shut down the iBook app.

    Well KT.....I tried that. But it still didnt work. I have 2 pages that have tables. The first page is just a full page with text only with a gradient colored screen in the table column heads. The 2nd page has the graphic illustration in the 3 table cells. Both pages shut down when opened to full screen view. But when i remove the graphic, there is no problem with a shut down. I know its got to be something you have to do but is unwritten in any manual.

Maybe you are looking for

  • Error while reading USB Port : using JSR80

    Hi Everybody Iam trying to read the data from a usb device [a fingerprint scanner] by using jsr80 with the help of following files which are in my classpath 1) jsr80-1.0.1.jar 2) jsr80_ri-1.0.1.jar 3) jsr80_windows.jar 4) commons-logging-api-1.1.1.ja

  • Fiscal Year Variance Change affected AA Balance and Recalculation of Values

    Hi Experts, I have a scenario where we change the Fiscal Year Variance on certain Company Codes. The Fiscal Year Changes were on Period 12 from Nov 26th to Dec 31st (last Fiscal Year Var was until Dec 25th), and Period 1 of next Year will already sta

  • Trouble with Flash Player

    When I attempt to read videos on news programs one reported that my Adobe extensions were disabled; and also, when I rebooted I got a message that Adobe could not open "Registration Lock On" saying that it was not a supported file or that file was da

  • How can i use link in report to go to new page with parameters??

    Hello I've created a report and have added a link (to a html url) to one of the columns. Whenever i click that column in a row, a new page appears. At this moment this page is static. However, i want to show the details of the selected row in the rep

  • When saving out transparent web pngs, they are showing up 'dirty' in other applications (like Gimp). Help?

    I've linked one of the images in question; a 16x16 px icon for a settings page we're using. When this image is opened in another program (Gimp, in this case- the dev team does not have Photoshop), they are finding 'dirty pixels'. Specifically, if you