Ipad 3 (new ipad) with external display, ipad not booting up

i have an old ipad 3 (new ipad) witha broken digitizer (touchscreen) and in order to use it without the touchscreen i bought a "30pin male (ipad connector) to 30pin female (ipad connector)/ "vga in" as seen in the picture below, but as i connected everything up the ipad kept turning on displaying the apple logo and
turning back off immediately, any suggestions??

This is a technical support forum, not a discussion forum. If you persist, the Hosts will most likely delete the thread. They may delete it anyway.

Similar Messages

  • Band new computer with k7n2 delta will not boot or moniter not working

    this is my first complete system build so please bare with me. the system uses a enlight 420 watt power supply in a lan boy case. it has a K7N2 Delta mother board with a 2500 barton amd cpu. the drives include 2 cd drives 1 floppy and one 120g hd, pny 5600 ultra video card 1 g kingston value ram ddr dual channel. when i turn on the power all the fan turn on the led in the front of the case light up but i get no boot or or video card not sure which yet. i get #1 led is red #2 led is red #3 led is green #4 led is green. i has tried to unplug drives with no change. tried a cmos reset with no change. tried a old voodoo video card with no change. tried to set the fsb to 100mhz with no change.
    any other idea or suggestions would be helpfull.
    justin
    just tried used one stick of ram at a time with no change. the p.s. is +5v 40a, 3.3v 30a, +12v 18a, -5v .3a, -12v .8a, +5vsb 2a.

    GOT IT  TO POST LAST NIGHT. I HATE TO SAY WHAT I FOUND I FEEL A BIT LIKE AN IDIOT. WHAT I FOUND WAS THAT THE RESET BUTTON IS POLORIZED AND I HAD IT ON BACK WORDS. I TOOK ME WALKING AWAY FROM IT FOR A DAY TO COME UP WITH THE IDEA.
    THANKS FOR ALL THE INPUT EVERYONE
    JUSTIN

  • HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I use an iPad Mini as a external display for any new Vixia Series Camcorder?

    Hey Everyone, 
    I've worked with Vixia's previously and am looking to purchace one of my own, a G20 or G30 most likely.
    I'm very interested in using an iPad Mini as an external display and wondering if anyone has had luck with this.
    Cheers and thank you!

    do you mean you want to play your videos from your Vixia camcorder on your iPad mini? Well, that may be a little difficut. Because the video came from your camera may not be a very friendly format. 
    Here you can try install VLC on your iPad mini , VLC should support AVCHD (*.MTS) natively.
    If this can't work, then find yourself a free converter;
    Handbrake, Any video converter ,ffMPEG etc.
    If this can't wrok , or the output quality is jerky.
    try this one free mts/m2ts converter from pav, I used it and considered to update it.

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • I used icloud to sync my new mini2 with my old ipad-3 do

    I used icloud to sync my new mini2 with my old ipad-3 everything went fine. I use itunes to BU my ipad & mini, and do not need family icloud. Is there any reason to stay signed in to icloud with my devices. Won't my ipad & mini sync contacts, calender etc. to each other with out icloud?
    Thanks!

    Thanks Winston. I asked because I can't get my Mini2 calender to sync with my ipad or outlook calender. Trying to eliminate what I don't need. I have everything set up properly AFAIK. Do I need something like a Exchange account to get the Mini calender to sync, or should it sync automatically.
    Ipad has been upgraded to iso 8.1.2. and it sync's to outlooks calender and vice versa, just Mini2 calender won't sync.
    thanks

  • Is a ipad mini available with retina display

    Is an iPad mini available with Retina display?

    No, and there's a ton of rumors and speculation about if/when Apple will release an iPad mini with Retina display.
    Of course, Apple doesn't officially comment on these speculations.
    For all it's worth, check out this:
    http://www.techradar.com/news/mobile-computing/tablets/ipad-mini-tipped-again-to -shun-retina-display-1189628

  • I have an iPad 4th Gen with Retina Display.  I want to watch movies on an airplane.  I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

    I have an iPad 4th Gen with Retina Display.  I want to watch movies on an airplane.  I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

    Hi there slogrown,
    You may need to download these purchases directly to the device. Take a looke at article below for more information.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
    -Griff W.

  • Macbook crashes with external displays, Macbook crashes with external displays

    Dear Community,
    I have a problem with my new (Dec. 2013) Macbook Pro. Everything worked fine until two weeks ago. Then, I connected my Macbook via VGA-adapter (original) with an LCD Monitor at home (I had done this before without any problems). My Mac froze and nothing happened, so I had to reboot it manually (press the on/off button 5 seconds). The Macbook would show a grey display und would not reboot, no matter what I tried. The secure boot program did not work, either. I could start it with disk utility and load my last time machine backup.
    After I did this, everything worked fine again. Last week I tried to connect my Mac with another LCD display at work (which had also worked fine before). Same error! Mac froze and nothing worked and I had to load a backup again.
    I brought my Mac to the next Apple store, where a hardware check revealed no defects.
    Nonetheless, they exchanged the logic board and told me everything was fine, again.
    Today, I have worked the whole day using my external display at work. Everything was ok, but I could only use the external display and not the Notebook display. When I tried to sync the two monitors to work with the Mac and the external display together – same error!
    I have called the Apple store, but they had no idea and just told me that the Apple warranty does not cover third-party displays. The Apple hotline suggested looking for a driver for the external displays, but there are none. And again: Until two weeks ago, everything worked without problems.
    Has anybody an idea what to do with this?
    Julia

    I was searching and found that the Matrox DualHead2Go maybe work. Any idea?
    Thanks

  • External Display will not turn back on after sleep

    Just bought a new MBP last week and gave my wife the MB. I typically attach to an external 24" display and run in closed clamshell mode. I have been doing it for quite some time with no issues. Now with the new MBP if the energy saver kicks in and turns off the display, and/or the energy saver puts the computer to sleep when I attempt to wake it up the display flashes then goes blank. There is no way to turn it back on. When I open the clamshell the internal display will only show some random pixels and a white line at the top of the screen. There is no way to correct it unless I shut down the machine.
    I am running with the Nvidia card, not the internal Nvidia. If I manually put the computer to sleep it will wake normally with no screen issues. It will also not act up if the external display is not connected.
    Any help or suggestions of a setting I might have wrong that would cause this?

    It is a Gateway FHD2400. Connected from mini display to HDMI. My previous MB was connected to the same monitor for the last year with 0 issues. It was connected mini dvi to VGA.
    The issue is strange because it only happens when the computer turns off the screen or sleep. When I put it in sleep it doesn't happen.

  • MBP Retina low performance with external displays

    Hi everyone!
    I have a very bad performance with my MBP 15´´ retina display when it comes to ad an external display. I have a FUL HD LG monitor that looks very bad when i connect the HDMI or the thunderbot port with the proper adapter (as bad as you can´t even read). I want to know if this may ba a hardware problem just with my computer or if it is a software problem, any ideas? does anyone have the same issue?
    How can i update my NVIDIA card???
    Thanks a lot!

    Topic seems to come up here often. Apple has a tendency to dismiss the issue.
    Its a pretty well known problem that Mac font smoothing doesn't seem to work well on high resolution third party external displays, making text hard to read. In addition, I think the Mac HDMI resolution support is limited to 1080p, so you must use DP or DVI video interfaces to see full monitor resolution.
    The OS default is no font smoothing on external displays (except perhaps the apple display). There is a terminal command that will enable font smoothing for any external monitor, but it often doesn't work well enough. I found that using the OS zoom feature magnifies text to the point to be easily readable. You can set zoom parameters in the accessibility systems preference panel.
    For some reason, sometimes the Mac OS thinks some monitors are TVs and use YCbCr instead of RGB. You can open the color sync utility and brouse the settings to see what is being used. There are scripts available that can fix that but are more complicated to install than an app.
    It seems that PCs are way ahead of Macs with external display implementation. Most folks having monitor problems with a Mac do not see the same issue with PCs or Unix/Linux OSs.
    Oh as far as updating the video card, can't. The monitor  "drivers" are built into the OS. When a new display is connected, the OS finds the profile for it.

  • I have Problem with my new macbook with Retina display

    my new macbook with Retina display i have Problems
    (Suddenly Stuck) stop working don't thing move even mouse even caps lock light in keyboard it not work it is totally Stuck till shutdown it from keyboard and restart

    Hmm sounds like a saved application state issue and memory related.. I hate to ask are these graphic intensive apps. ?? games ??
    Try these two things and restart if it still occurs then i recommend contacting AppleCare
    disable the Resume and App Restore feature completely in Mac OS X 10.7.
    Launch System Preferences and click on the “General” icon
    At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”
    - Click on the Apple on the top left. Choose shutdown "Uncheck" Reopen windows when logging back in
    **use your mac normally just like you were if the issue reoccurs then contact AppleCare..  Enjoy..

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

  • New iMac with Retina display has attracted a group of ants. Why?

    New iMac with Retina Display has attracted a group of ants to nest in it, while they ignore my old Macbook Pro. What is in the new laptop that attracts the ants? The Apple Support set me up with an appointment at an Apple Store and the Apple Store says it is Apple policy not to touch it with the Ants in it. Wasted 2.5 hours in travel time and in the store with no solution.

    Its the electrical charges that attract them, they sense them as other critters to eat / talk with 
    the swarm of tiny DC power fields inside a computer, and the charges across the screen attract insects that have EM sensors on their exoskeletons. Its a come hither spotlight for insect critters.
    http://answers.yahoo.com/question/index?qid=20070523002354AA340iK
    If you want them out, which of course you do.......make a sugar trap for them.... a trail from the computer to a little pile.  One screams the treasure to the others, .....they all come running, then you brush them away, or some other insidious method. 
    See this one:
    http://www.sfgate.com/technology/businessinsider/article/Crazy-Ants-That-Eat-Ele ctrical-Equipment-Are-4533102.php

  • I have a student Visa. I wanted to purchase the new macbook with retina display. Can i clam a VAT refund?

    I have a student Visa. I wanted to purchase the new macbook with retina display. Can i clam a VAT refund?

    When I go to europe and head back to the states I can go to customs at their airport i.e france, italy or germany and get VAT refund for all the purchases I made. It does not work the other way around. purchase in the US heading back to europe as far as I know but you can ask US customs at the airport if they do such thing, just make sure you have copies of your receipts.

Maybe you are looking for