IPad 3 on iOS 7: problems with interface

Looks like there is no glass effect on my iPad 3. Anyone noticed the same? I checked a bunch of videos by guys with the same configuration on YouTube, but they seems to be fine. Unfortunately I got gray bars only.
Screenshoot: https://www.dropbox.com/s/cwty9p3bgwxtv3a/noglass.png

I have same as you... a buddy on his mini has the color scheme of his theme... this bites..

Similar Messages

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

TS1398 I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And i had checked with my rout

I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And I had checked with my iball baton router with the iball sevice provider.

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6. Only iOS 5 and below.
http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1&region_id= 1&tab=howto#/howtoTab
Sony wrote:
Are the headphones compatible with the Apple® iOS®6 operating system?
Solution
The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
Region
Canada
United States
Products
MDR1RBT
Last Modified Date:12-05-2012ID:C1032819
You can still try though, but there's no guarantee.

Ipad 2 with IOS 6 problems with apps and battery

Ok, I had updated my iPad the day of or day after the IOS 6 came out and at first I had no problems with it. Except now, for some reason I am starting to have problems with different apps and with the battery life. First off within 15 minutes, it went down to almost 90% charge with it being a full charge and me hardly using any apps and closing the ones I wasn't using (which was just safari and Facebook open). But the problem I have been having is that I cannot chat with my friends on the Facebook app now because it will show its loading the chat box and then freeze up. With pages and numbers, they seem to take longer than usual to load up which is around 10 seconds or so before I can do anything. I had uninstalled and reinstalled the apps with no effect and tried restarting my iPad. It also seems like my iPad is taking longer to shut down and turn on than usual even though i make sure all the apps are closed before turning it off. (the location services, bluetooth, notifications, FaceTime, messages, and limit ad tracking is all turned off to help with battery life and i don't use them.)Is there any suggestions on what I can do to fix this problem?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

IPAD 1 IOS Update Problem

Hallo,
i have a Problem with updateing to IOS 4.3.2. The Download starts and approx the half of the Download (296 MB) I get the Error -3259).
I have had checked the firewall, turned off the firewall but still the same result. Tried only Download same result.
When I download the IOS4.3.2 for my Iphone 3GS ist works well and without any Problem. Same PC, same iTunes, Firewall on.
The same Error occours during the Update vom 4.3.1 to 4.3.2. But there I have had downloaded the IOS from an alternative Server and it works.
Is it possible to download only the the IOS over http or ftp ?

What apps that you can download will depend upon whether they are compatible with iOS 5.1.1, or whether the developer has an older compatible version of their app available.
If the apps are free then you could try downloading the current version on your computer's iTunes so that the app is in your purchase history. Then on your iPad go to the Purchased tab in the App Store app and see if you can download an older compatible version of it. That won't work with all apps - it's the developer's decision as to whether they have older versions available : http://support.apple.com/kb/HT5919
Or have you already bought/downloaded the app and still have a compatible version on your computer's iTunes that you can sync to your iPad ?

Ipad in WDS network: problems with roaming

We have a WIFI-network with several remote wifi-stations. Using an iPad, we have problems when moving within the network to pick up the stronger signal from a close-by station. Instead, the iPad keeps the previous station till it gets so week it drops the connection.
It looks, we had a problem with 3.0, then it seemed to become much better in iOS 3.2, now with 3.3. it got bad again.
Any experience or better idea how to get a reliable connection when moving within the wifi-network-area?

you did not say what router you are using. i am asuming you have 2 apple airport base stations, one named lab1 and the other is lab2.
if you want your ipad to steer to the nearest base station you need to run an ethernet cable between lab1 and lab2 on lab1 you set airport utility to "allow this network to be extended" and on lab2 yoiu run airport utillity and set it to "join an existing network", there should be a setting there"connect with ethernet".. once this is properly setup, the ipad should automatically steer to the access point that has the strongest signal
also on lab2, you want to set it to ""allow wireless clients". if that is not checked, then the ipad cannot join it.
if you are not using apple airport extremes or apple airport expresses in your network, then your probably posting on the wrong forum. and you would need to go to that manufactures website to see how to setup their wireless routers to wds.

Why does apple ipad and iphone have problems with comcast?

We attempt to send pictures through our comcast wifi account and gets to about 90%and freezes. Have reset modem, and router, have turned off phone and reset it. Have switched to 4G then pictures will send. Only has problem when connected to wifi. As my ipad is wifi, I cannot send pictures at all with it.
Did not have this problem until iOS 6 update.
Any suggestions?

My iPad and other devices have no problems with Comcast, but I didn't get my WiFi router from them. If you did, your router may need a firmware update, or you may need to get a different model of router.
Regards.

Problem with interface - when send the data for PA0002

Hi Gurus,
I am interfacing employees data from one system to another system with all the PA infotypes.
we are using the fuction module " HR_MAINTAIN_MASTERDATA " to upload the master data. Here the problem is, when we send the data - in destination system all the segments have the data correctly . But middle name is not loaded in to the system. Problem with only middle name.
But, here strange thing is, when i resend the idocs it is laoded correctly all the fields with middle name also.
I am unable to figure out the problem .. Please let me know if you have any advise on this ..
Thanking you.
Regards,
Giridhar Pujari

Hi Sikindar,
Technical name is corrent .. and once you resend the idoc, you can't see the problem again.
Regards,
Giridhar Pujari.

IOS 6: problem with sprites rotation in gpu mode

Hi,
I have a game published on iTunes and today I found a serious problem with the latest iOS 6 GM.
Sprite rotation around X and Y axes doesn't work with gpu render mode.
Here is my code:
<mx:UIComponent id="gameCanvas" mouseChildren="false" mouseEnabled="false" width="100%" height="100%" />
var gridSprite:Sprite=new Sprite();
gameCanvas.addChildAt(gridSprite,0);
// then I draw stuff on this gridSprite
It works fine if this sprite is not rotated.
But when I change its rotationX or rotationY properties, the sprite disappears from the screen!
My game works fine on older versions of iOS (5.0, 5.1.1 and 6 beta 3).
This problem only happens on iOS 6 GM and since iOS 6 will be officially released in a few days, I am really worried...
I tried Air 3.3 and Air 3.4 - both have this problem.
In "cpu" and "direct" render modes sprite rotation works, but graphics performance is terrible. So "gpu" is my only option...
I'll really appreciate any help.

I performed some other tests and so it seems like everything is 2D in gpu mode. When I try to do 3D transformations, objects disappear from the view.
For example out of these 3 images only image1 is displayed:
<s:BitmapImage id="image1" source="logo.png" height="25%" width="100%" />
<s:BitmapImage id="image2" source="logo.png" height="25%" width="100%" rotationY="5"/>
<s:BitmapImage id="image3" source="logo.png" height="25%" width="100%" z="5"/>
Maybe there is some setting that enables 3D (something like zBufferEnabled=true) that needs to be explicitly set for iOS 6 in gpu mode?
UPD: Ok, I'm pretty sure it's a bug, I reported it to Adobe - Bug 3330901

64 GB 3G iPad: There is a problem with your iPad

I just got my 3G iPad and I have this error when plugging in my iPad for the first time:
after waiting for the "Waiting for iPad..." message to end, iTunes shows this:
There is a problem with your iPad
We're sorry, the iPad you connected is not recognized and cannot be activated for service.
We recommend you visit your nearest Apple Store for more information.
To find your nearest Apple Store, click here.
This is a bummer. I just software-updated my MacPro to the latest version of iTunes, too. Are Apple's servers swamped due to the 3G release or do I really have to take it into the Apple Store?

I phoned a manager at a local Apple Store and he suggested trying to get the iPad into restore mode. Holding the "power button" (as I call it, they call it the screen lock button) and the home button reboot the iPad, and iTunes no longer had that "There is a problem with your iPad" screen. I was able to press the restore option in iTunes, and subsequently reinstall the iPad to its "factory setting."
I'm now restoring the iPad 3G from a backup of my iPad Wi-Fi. There was a bit of a delay at the "Waiting for activation" portion of the process, but I'm past that and it's installing a ton of my apps. Hopefully useful for anyone else who gets that error screen.

Exchanged ipad for new, same problems with wifi

no cure for either unit, return for refund the only answer, none of the "tricks" listed work, all I want is a product that works, this ain't it.

Before you return it, did you try the "lowering Brightness" fix?
I, too, exchanged my iPad after having wi-fi issues. The second iPad suffered from the same problems. And yes, I did reconfigure my Router's settings according to Apple's suggestions--but that didn't work. So I ran across this thread: http://discussions.apple.com/thread.jspa?threadID=2391395&tstart=30. I tried the solution discussed in that thread, and now my iPad's wifi works normally.
Hope that helps somewhat.
(And I disagree that a customer should have to purchase a different router simply because the iPad isn't conducive to mainstream routers. The iPad was advertised as compatible with mainstream wifi routers. We, the consumers, should not bear the burden for its incompatibility. Plus, try going to your local coffeeshop and telling them to get a new router because your iPad isn't compatible with their "low end" router).

Problems with interface runnable

Hi everyone !!,
I have been developing an application with JDK 1.5.0_06 and applications server Apache Tomcat 1.4.31. It is a multithreaded application which uses a class that implements a runnable interface.
At the moment, this application must be compiled and executed in another machine with JDK 1.5.0_05. The problem is that when an instance of the interface Runnable is called and its method .start() executed , the instance isnt created and the method run doesn't start.
I hope you understand what I mean. If you dont , please, ask me.
Any idea? Any help? I have no idea why this is happening? any problem with the JDK? the applications server?
Thanks in advance, Mar�a

problem is that when an instance of the interface
Runnable is called and its method .start() executed ,
the instance isnt created and the method run doesn't
start.
I hope you understand what I mean. If you dont ,
please, ask me.
I don't understand.
Runnable does not have a start() method.
What do you mean "the instance isn't created"? If you create an instance of something, it's created. If you don't, it's not.
If you call a Thread's start() method, that Thread's Runnable's run() method will be executed in a new thread of execution. If you don't, it won't.

IPad 3 on iOS 7: problems with interface

Similar Messages

Maybe you are looking for