Ipad 3 rebooting automatically after iOS6...
anyone got this problem?
After the iOS6 update I had problem entering the wifi at home with a netgear router... I change to static ip as I did on my iphone 4s (where I fixed the issue) but the ipad in in continuous rebooting even when is sleeping...
please HELP!!!
Happeing on my iPad2. Did a restore and worked fine for about 6 weeks. Then had to go through the process agian. I noticed that when the battery indicator gets stuck that it going to start and I will have to restore.
This is crazy I have never had a issue with my 1st gen iPad. My wife still is using it.
Somethng
Similar Messages
-
One of the e-mails in my ipad deletes messages automatically after reading without backup. What do I do to correct this so that my mails would remain in the inbox for reference purpose?
As you are on a residential service you have to wait for engineer availability priority is given to Business users as they get a different service level agreement also using a residential line for business use can leave you open for suspension or cancellation of service as it breach's the terms and conditions
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
After uppadating mavericks os x last 3hrs on my macbook pro with retina (15 inch, mid 2012), it has rebooted automatically twice in a hour. it is really annoying. what seems to be the problem. can anyone help me out. waiting for your help guys. apple is really ******* us up now.
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report. -
Hi folks as in the title:
My Ipad 4 froze up and rebooted automatically numerous times.
It then immediately froze up completely and didn't try and reboot itself.
I then hard restarted the device using the home and power buttons simultaneously.
I got the Apple logo and saw my desktop for a moment and then it froze up.
Hard rebooted again only this time I saw "connect to iTunes".
I connected the device to my MBP and iTunes where I was told it was in restore mode.
I followed the on-screen instructions in iTunes to restore the device.
I spent 15minutes downloading the necessary files etc only for the restore to fail through error code '1600'.
I explored this error code in Apple support and followed all Apple's suggestions, and subsequently tried the restore each time.
I have now exhausted all fix options for '1600'...and I can't even get 'connect to iTunes message' on my iPad device now.
Any suggestions would be welcome please?
Kind regards.Thanks for the response Demo.
Unfortunately I don't have another computer with which to try a restore from.
I've tried to reboot the iPad again using the sleep and home buttons (whilst it is unplugged from my MBP) and it remains completely lifeless. I know there is 80% battery life in the device as I had it charging when it malfunctioned.
I've tried recovery mode through iTunes in excess of 15 times now all yielding the same and inevitable result of 'error 1600'.
I think it's time to get to know the team at my local Apple store... -
IPad 3 reboot loop after iOS update
Hi,
I have updated my iPad 3 to the last 6.1.2 version and since then it just reboots automatically every two minutes.
I have tried to restore it but now it is impossible to activcate the device from my Wifi or even when connected to iTunes ( it says it can't connect to apple server). In the mean time the iPad just keeps on rebooting every so often.
What to do?Try this:
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
Why is it that my new iPad not backing up automatically after ios6?
Please help.
Try deleting your last backup if you have one and try backing up again. If that fails, You may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the offending app and exclude it from your backup. If it's the camera roll that's the problem, import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and delete them. If you want some of them on your phone again, put them in a folder and sync them back to your phone by selecting the folder on the Photos tab of your iTunes sync settings and syncing. Also see http://support.apple.com/kb/TS3992.
It also might be related to your wifi. You could try backing up while connected to a different wifi to see if that works. -
IPad keeps rebooting itself after updating to iOS 8.3
Just updated an iPad 3 to iOS 8.3 from iOS 8.2 . Update took a while to install (over 20 minutes) and then the Apple logo appeared for a bit then the screen went black for about 10 minutes. The device was fine for a while and then started rebooting itself, hung on the Apple logo for about 10 minutes and now suddenly it came back. All apps were up to date. The device had not had any issues prior to the update. Has anyone else had this issue?
Thanks!No, this is definitely an iOS 8.3 bug, Allen. I have an iPad mini (original, 24/12 old) and an iPhone 5 (not S, 18/12 old). Updated both from 8.2 to 8.3. I keep them and the apps up to date and run a tight ship.
Since the update, the iPhone has been behaving normally.
However, starting immediately after the update, the iPad has been rebooting: when you plug it into the power and it goes to sleep, it reboots itself. This NEVER ONCE happened before the 8.3 update -- and I think I started with this iPad on iOS5 or at least 6, with all the updates inbetween. If you want to use it again shortly after plugging it in, you have to wait about five-ten minutes (as other have reported). So far, it has always rebooted successfully. But you do have to put in your passcode in response to "you have to enter your passcode upon rebooting" message; and tell it to trust your current computer connect once again.
It just now rebooted itself once again when plugged into the computer USB port, while in the middle of a sync (the screen went to sleep). Not happy about that; potential to damage data.
I confirm: this NEVER happened before 8.3, and it now reliably happens EVERY TIME I plug the iPad into power and it goes to sleep. I have three power sources (computer USB, individual Apple charger, aftermarket reserve battery charter) and it happens with all of them.
As far as I can tell, it only reboots itself once per charger-plugin, and doesn't do so again until you unplug it and plug it back in again (somewhat confident, but not 100% sure, of that).
Hope that helps. The bug needs squashing, and soon. -
Z87 MPOWER reboots automatically after shutdown with latest BIOS
Hi!
I was having some problems with the RAM using XMP profile (CORSAIR CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9). Mainly I had some occasional reboots at windows startup and some rare random blue-screens but it all went away after updating the BIOS to version 1.7 .
But now I'm having another issue. After shutting down the PC it turns itself on after 1 second. It only started to happen after the 1.7 update. Any ideas of what it might be?
Thanks in advance!
My PC specs:
CPU: intel core i7 4770k
COOLER: Corsair H60
MOBO: MSI Z87 MPOWER
RAM: Corsair CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9
PSU: Corsair HX850
PSU: PNY GTX780 OC Enthusiast edition
SSD: Samsung 820 EVO 500GB
HDD: Seagate 7200rpm 3TB
SO: Windows 8.1 Pro x86-64See that latest beta bios: https://forum-en.msi.com/index.php?topic=169826.msg1279904#msg1279904
Flash using the method and files to which I linked. -
Satellite A110 reboots automatically after every shutdown
Hi!
I have the following problem:
When shutting down the system, my notebook first goes off completely as desired, but 2 seconds later it starts again. It behaves different from a usual reboot - then it does not turn off, but reboots directly. Furthermore I can exclude software problems, since I tested it with different operating systems and the behaviour is the same everywhere. This problem was not there earlier, but then suddenly occurred and is now there every time.
Ah, also important is that if the AC adaptor is NOT connected (i.e. notebook runs solely on battery), the problem does not occur. If the notebook runs on AC power, the problem occurs, no matter whether the battery is in the notebook or not.
Can someone help? Every hint is highly appreciated!
My notebook is a
Satellite A110-228
Part Number : PSAB0E-00J007GR
Thank you very much!I have the same problem on an A135. I've updated the bios. I changed out the hard drive. (I have a few of these computers.) THIS IS NOT A SOFTWARE or FIRMWARE problem. This is a hardware problem. I just don't know what kind. When the power cord is plugged in the computer will not hibernate or turn off correctly. It will shut down then start up again in 5 seconds. When the power cord is unplugged both hibernate and shutdown work correctly. However, sleep mode doesn't work in either condition. Sleep mode always turns off the computer without doing a proper shutdown. Anyone have any ideas??
-
After installing Snow Leopard, Reboots automatically after Shut Down
After I installed Snow Leopard, my Macbook Pro restarts itself after I shut it down. This doesn't happen when I shut down from boot camp though. Here's the console log of the last few minutes leading up to shut down:
9/8/09 6:17:36 PM [0x0-0x17017].org.mozilla.firefox[243] Debugger() was called!
9/8/09 6:17:57 PM Notify[222] Gmail Refresh Done.
9/8/09 6:18:45 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:18:53 PM [0x0-0x16016].com.adiumX.adiumX[241] Installing SkypePlugin
9/8/09 6:18:53 PM [0x0-0x16016].com.adiumX.adiumX[241] is LibpurpleLoaded? yes
9/8/09 6:18:53 PM [0x0-0x16016].com.adiumX.adiumX[241] Calling purpleinit_skypeplugin()
9/8/09 6:18:53 PM [0x0-0x16016].com.adiumX.adiumX[241] Initialising PurpleSkypeService
9/8/09 6:18:58 PM DashboardClient[328] com.mindquirk.widget.harmonic: NO new song!
9/8/09 6:18:58 PM com.apple.Dock.agent[169] 2009-09-08 18:18:58.386 DashboardClient[328:a03] com.mindquirk.widget.harmonic: NO new song!
9/8/09 6:18:58 PM DashboardClient[328] com.mindquirk.widget.harmonic: <!--error-->iTunes is Closed
9/8/09 6:18:58 PM com.apple.Dock.agent[169] 2009-09-08 18:18:58.397 DashboardClient[328:a03] com.mindquirk.widget.harmonic: <!--error-->iTunes is Closed
9/8/09 6:19:09 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:09 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:16 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:16 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:19 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:19 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:23 PM Quicksilver[219] * WARNING: Method selectRow:byExtendingSelection: in class SFTableView is deprecated. It will be removed in a future release and should no longer be used.
9/8/09 6:19:42 PM com.apple.launchd.peruser.501[165] ([0x0-0x36036].com.apple.Console[644]) Exited: Killed
9/8/09 6:19:42 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:42 PM Notify[222] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
9/8/09 6:19:42 PM com.apple.launchd.peruser.501[165] ([0x0-0x35035].com.apple.systemevents[641]) Exited: Killed
9/8/09 6:19:42 PM com.apple.Dock.agent[169] file:///Library/Widgets/iTunes.wdgt/iTunes.js:475: JS ERROR: TypeError: Result of expression 'popup.options[myIndex]' [undefined] is not an object.
9/8/09 6:19:42 PM 1PasswordAgent[214] Shutting down 1PasswordAgent 2.9.29 #7569 built Aug 27 2009 20:46:40Here's what to do to correct :
Erase those 2 files : "com.apple.AutoWake.plist" and "com.apple.PowerManagement.plist" in the Directory:
/Library/Preferences/SystemConfiguration/
While done, shut it down. If it restarts again, just shut it down one more time. After this, it will stays quiet until you ask it to reopen. -
Ipad mini has frozen after ios6 update, help?
Can anyone help?
Well, since the procedure does absolutely nothing, it is of no value. If the OP wishes to do a Reset, they would need to push and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.
-
Live CD boots to a black screen that eventually reboots automatically
Never experienced anything like this before. The 02.01.2014 Live CD boots to a black screen that eventually reboots automatically (after 8-10 min). The hardware is an HP 2000-2C62NR laptop. I see the UEFI boot screen the CD displays, but that's it. I can select the first option to boot into x86_64 Arch live environment, but I get no feedback on the screen (just blank) and I do not see the network come up. After 8-10 min of just sitting there, it seems to reboot itself.
Just for kicks, I booted to a live Ubuntu 13.10 CD. Again, I get the boot menu, and selected "try ubuntu" from the prompt. Again, I get nothing but a black screen. The ubuntu CD did get further though; my router assigned the laptop an IP address. Any thoughts?Boot from the first of the system discs (by holding down the C key until the welcome screen goes away) and, in Disc Utility, repair privileges. Not just permissions, but privileges. Then reboot at normal. That will probably fix it.
-
my ipad has said to me that it hasn't been backed up in two weeks and it will do it automatically after I plug it in and connect it to wifi it would do it!
Please try to make a "hard reboot" by holding down the home button + the power button (at the same time) for a few secons until it start rebooting.
-
My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?
Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)
-
How clusterware restarts on automatically after server reboot in 11g R2
Hi,
I would like to know how the cluster restarts on automatically after the server reboot in 11g R2 RAC . The oracle restart feature in 11g R2 help to restart the components like databases, ASM in case of abnormal failure. But how the clusterware starts on own after the server reboot? can you share any documents or notes is really appreciated.
Thanks,
Robin.At Grid Infrastructure installation time system configuration is modified so that UNIX init daemon restarts OHASD: http://docs.oracle.com/cd/E11882_01/rac.112/e16794/intro.htm#BABIDEFI. For example with Oracle Linux 5 and Oracle RAC 11.2.0.1 you have following line in /etc/inittab:
h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/nulland:
[root@rac1 ~]# head /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system
ORA_CRS_HOME=/u01/app/11.2.0/grid
export ORA_CRS_HOMEEdited by: P. Forstmann on 11 févr. 2013 18:45
Maybe you are looking for
-
after my daughter tried many password to unlock my ipad, it became disabled, everytime i open it, it says "ipad is disabled, connect to itune, but after i connect it to ituned, it can not open due to passcode protected, how can i open my ipad?
-
I have tried installing and reinstalling the browser but it does not work. What do I need to do in order to install as new and so I can set up my new master password or recoup my old one?
-
Hi, Can someone please point to some resource to learn OSB asynchronous reqest-response pattern? Thanks in advance Rohit
-
Can anyone guide me of using LDAP with JSP?
I am a beginner in java. Plz post your answers in a simple and easy manner and explain it clearly. I am doing a project for which I require to use LDAP in JSP.
-
I have un-installed iTunes and I have re-installed it but I am still getting the same errors.