IPad 3 running iOS 6 not able to use wifi

Hi, just updated my ipad to iOS 6 and i am unable to connect to any wifi's. If i attempt to connect i get a browser window appear showing me the apple website with "the page you are looking for cannot be found"
Anyone else got this issue, and is there a fix for it?
Thanks

To the best of my knowledge, the Kindle app does not support Text-To-Speech.
Regards.

Similar Messages

  • TS1398 After upgrade to iOS 6 i am not able to use wifi.

    Connected, but no wifi traffic (at home).
    After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
    Can not connect at all (at work).
    Thank you for helpfull advice.
    Vladimir
    Please do not give me advice like:
    switch proxy to auto
    turn the flight mode on and off
    turn the iphone on and off
    release the ip
    recovery the network settings
    recovery firmware
    I have tried all these, but did not work.
    PS to apple:
    I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!

    This helped me solve the problem:
    I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
    Targat

  • I am not able to use Wifi through any party. My Labtop informs me I need to Network Configurate

    I am not able to use Wifi in the outside of my house because my Mac pro informs me i need configuration and i do not know what that means nor do i know how or what to do? Can some one help give me a 101 course and step by step?

    >>Duplicate post removed for cross-posting violation of the forum's ToS Verizon Wireless Terms of Service
        See Possible fix for some dlink routers with wifi issues  <<
    Message was edited by: Verizon Moderator

  • HT4623 When is ios6.1 release date . I am not able to use wifi

    Since I have updated my iPhone 4s, I am not able to use wife. I have not purchased iPhone to use as a toy, kindly solve this issue ASAP

    We are users just like you. No one here can tell you when a new update will be released, 6.0.1 is the latest version.

  • IPad 2 with iOS 7 not able to login to Apple ID and password

    I got my iPad 2 yesterday and I discovered this morning I could not login to my apple account. I tried to download an app, put in my password and i was prompted with a message that said I could not connect to the iTunes/apple store. I've tried many ways such as clearing cookies and data, setting 24 hour time zone, but none of these things worked. Is there a way to log back in? And if so, how?

    Setup Apple TV with iPad
    1. Setup Apple TV
    (a) Connect cables and power cord
    (b) Turn on TV and select Input
    (c) Configure Apple TV
    2. Setup Home Sharing on iPad
    Settings>Music/Video>Home Sharing
    3. Setup Home Sharing on Apple TV
    Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
    4. Pair Apple TV with Remote Control
    General>Remotes>Pair Apple Remote

  • Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Hi Tech5Apple,
    Thanks for visiting Apple Support Communities.
    If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    All the best,
    Jeremy

  • IPad 1 running IOS 5.1.1 not working with home WIFI, but everywhere else

    I have an iPad 1 supporting 3G and WIFI running IOS 5.1.1 and up to now it has worked great.  We recently had the cable modem in the house upgraded and the box included a better WIFI system than we had before.  After installation, all the laptops in the house worked great except my iPad.  One of the kickers is that when my wife came home with her iPad 1 running IOS 4, it worked great too.  And when I've gone to a hotspot, it also gets connected well.
    The symptoms are that the WIFI menu will see my home network as an option.  When I select it, I get a spinner and the left side bar will indicate that it is using that network, but the spinner never completes.  The upper left will mostly stay as 3G and will occasionally go to a WIFI setting, but nothing will connect.  If I tap on the details, I usually don't get DHCP connection and get an IP address.  Once in a great while, I can connect up and have access, but it is incredibly slow and usually fades off in a minute.
    I have tried turning off the iPad, resetting network settings, telling it to forget the network and try again and reset the iPad.  I have removed all security from the router, reduced down the encryption to WEP like the old wireless router and still nothing.  Of course the Cable company says it is the iPad problem and I tend to agree. 
    My next step is to erase and start over, which I do not wish to do if I don't have to.
    Any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an iPad 2 running iOS 8. The email app is not working. The screen shows empty email box, then closes on its own. I have tried closing the app, turning ipad on and off and reset to no avail. Any other ideas? Thanks.

    I Have an iPad 2 running iOS 8. When I open email, the email isn't there. I have tried closing the app, turning off the ipad and resetting the iPad. None of that helps. Any ideas? Thanks.

    So the app is opening to a white screen then closing on its own?  If you have deleted your email accounts & the app is still crashing then I would try resetting all settings (without deleting data).
    Did you reboot the iPad after removing the email accounts?  If not, try that first holding the home & sleep/wake buttons simultaneously until the apple logo appears, then release & once booted back up, try opening the mail app again. 
    The problem may have started because one of your email messages might have been corrupt or had a corrupt attachment.  If you can access it from a computer, sign into your email & see if there are any that can't be opened or produce errors opening.  If so, delete the offending emails then try adding the account back to the iPad.

  • HT1414 my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the  home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is d

    my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the  home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead

    If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
    Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
    Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you.

  • Hey everybody i have an ipad 2 running ios 5.1.1 but itunes does not transfers music or apps to my pad but it transfers it to my ipod 4g running ios 6 pls help me guys

    hey guys please help me itunes is not transfering music or apps to my ipad 2 running ios 5.1.1 but transfers to my ipod touch 4g running ios 6 please help me

    Are you selecting the music to sync to the iPad? Try it this way.
    Connect the iPad to the computer and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums or playlists that you want to sync - or the entire library if you like.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Do you have your sync preferences set to Manually Manage Music And Videos in the Summary Tab of iTunes? If you do, deselect that and try again.

  • How do I retrieve the Identifier number from iPad 2, running iOS 5.1.1?

    I am trying to de-bug a game on my daughter's iPad 2, running iOS 5.1.1, and want to send the Advertising Identifier number to the game developer. However, I seem to be unable to retrieve the number.
    I tried downloading the app "the identifiers," but whenever I click "i" to enable numbers, it crashes.
    Also, when I visit the apple support page for retrieving the advertising identifier name, it says to enter "oo.apple.com" on the device, but that link seems to only redirect back to itself.
    Very frustrating. How else might I locate the Advertising Identifier?
    Message was edited by: chris romano

    Oh, another mistake on my part!
    I need to ENABLE the identifier on the iPad2 iOS 5.1.1... this should get The Identifier app working, and then I can read the number and tell them.
    However, on iOS 5.1.1, there is no Settings > Privacy > Advertising that I have been able to find.
    I apologize for all the fumbles on my end... I put this problem down a week ago and I am just picking it back up, so I kind of forgot some important details. Doh!

  • I can see home sharing on my iPhone and iPad both running iOS 5 but when it loads the library is empty. Help!!

    The iPad is new today so pleeeease help! I have the latest version of iTunes and both iPhone and iPad are up to date. I have never had a problem with home sharing before 10.5 iTunes. Both mobile devices can eventually see the shared library but load it as though it is empty. This applies to movies as well. I have turned off home sharing on the mac and restarted it. I have also made sure that the username and password on both mobile devices are correct. Help!
    Mac mini ppc running 10.5.8
    iPhone 4 running iOS 5.0
    iPad 2 running iOS 5.0

    This has solved loads of people who have this issue and have used an alternate DNS setting.  Below are instructions for both iPhone OTA and on you Mac
    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    You can use OpenDNS
    208.67.222.222
    208.67.220.220
    or
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4
    I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

  • I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

    I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

    Hello Shaholeh87,
    Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
    Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
    To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
    Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
    Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
    http://www.apple.com/itunes/download/
    Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
    Open iTunes Application on your computer and then start the process step by step
    1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
    2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
    3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
    (If the low battery screen appears, charge your device for a few minutes and try the process again.)
    4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
    5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
    Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
    Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
    Hope this process will help you

  • HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT4137 Please I don't remember the restriction passcode on my ipad 2 running ios 7.1. Please any help to reset it because I don't want to loose my documents?????

    Please I don't remember the restriction passcode on my ipad 2 running ios 7.1. Please any help to reset it because I don't want to loose my documents?????

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

Maybe you are looking for

  • Can't make LOM working more than 20 seconds after startup

    Hi. This bottle in the sea because I don't succeed to make LOM working. The story is the following. I have 5 Xserve Intel involved in a Xsan installation. Port 1 is used for public LAN, port 2 for private LAN, as usual. I've configured the LOM settin

  • Down payment is not been showed correctly at RFIDESM340 report

    Hi gurus. I have a problem with the report RFIDESM340. I have 2 down payments for an intracomunitary client in one invoice. The financial document is been showed correctly with two diferent positions for each down payment but in the RFIDESM340 report

  • PDF modified while opened in preview

    Here is a weird behavior (bug) for 10.6. When a pdf file is modified outside while it is opened in Preview, now Preview automatically shows the first page. (The behavior for Leopard was showing the updated pdf in the current page.) This new behavior

  • Problem in Execute query on non-database block and database block together

    Hi All, In my form,i have 1. First block is Non-database block with one non-database item. 2. Second and third blocks are database blocks. Now the problem is that i want to perform execute-query for all the blocks. If the cursor is on the non-databas

  • Standard PR Document Type Deleted by Mistake

    Hi Experts, By mistake i have deleted Purchase requisition document type NB and when a Transport Request is generated i saved it but it is not yet released.. now by anyway can it be retrieved back as original NB with out creating a new one manually..