IPad 3 - smtp not working
Hi, i have the axact same configuration of iPhone 4S for my email SMTP
mail.mydomain.it
[email protected]
password
use SSL: NO
autehntication: password
port: 25
and it dosen't work, when i try to send some email it keep spenning
gmail (auto config) works fine
i configured email directly on iPad
If everything is setup exactly the same, try deleting the password and re-entering incase a mistake was made the first time.
If that doesn't work delete the entire account and then enter all the information again.
Similar Messages
-
The device mini iPad is not working after the update of the system
Hello,
I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
please replay me .
Best,
MawaddahTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPad activation not working please help Urgent
iPad activation not working, I got this message "this ipad is currently linked to an Apple ID, sign in with the Apple ID that was used to set up this iPad. I enter my icloud account and user name to the computer and its ok, but not working for ipad
See if these Apple Support documents help you ...
https://www.apple.com/support/appleid/
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
If not those, then go to Apple Support for some official Apple Support help ...
Apple Support
http://www.apple.com/support/
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/ -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057 -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!Place the device in DFU mode and let iTunes restore the device to factory condition.
-
The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?
I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some. -
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
-
Ipad photobooth not working, shows curtain closing but camera seems to be off
ipad photobooth not working, shows curtain closing but camera seems to be off
Have you tried closing the Camera app completely ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
iPad sound not working. Need help
Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
I have a Ipad safari not working.
I have a Ipad safari not working, was workingthis am. It goes to web sites but partial greyed out and can not navigate. Other internet connections appear to be working correctly.
Try clearing Safari's cache : Settings > Safari > Clear Cache and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My iPad is not working with the Jensen
My iPad is not working with the Jensen dock
That would be an issue for support from the Jensen dock people.
-
My iPad is not working on YouTube I don't get video only sound
My iPad is not working on YouTube I only get sound no video
That wasn't very helpful.......
To the OP, are you using the YoutTube App, or are you trying via Safari? -
After sending sound from find my iphone, now ipad does not work
after sending sound from find my iphone, now ipad does not work
it can't be unlock and scrren is blank, only siri worksTry a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.
Maybe you are looking for
-
Hi, are having serious issues with my Mac Pro. Kernel panics occur on frequent basis during Final Cut Pro, but also with other processes. Trying to re-install Mac OSX on a different harddisk doesn't work. Is there anyone who knows what is happening?
-
IDOC - BPM - IDOC Error --no sender or receiver interface definition found
I have an integration scenario, IDOC - BPM - IDOC. SAP will send ACC_GL_POSTING IDOC to XI, a BPM will start and then the BPM will send an IDOC to another SAP system. I have read instructions on weblogs: /people/pooja.pandey/blog/2005/07/27/idocs-mul
-
How do you automate the point size of page numbers in a generated index?
In Framemaker 10 I have a generated index for a book. The indexed items are in point size 10 but the generated page numbers come out in 12 pt. Can I automate the page number size to be 10 pt? I have tried defining a character tag IndexPage Numbers an
-
Does a text box for an ebook have to be the exact size?
I'm using Indesign to create an ebook. The usable, non-bordered area of each page is 800 x 600. For each page I use the Type Tool button to allow me to create a text box that fills the page area of 800 x600 pixels. I go to great effort to make sure i
-
hi I have the following for loop: for (TreeMap <String, Integer> i = result; i.size()!=0; i.headMap (i.lastKey())) {out.println("keyword = " + i.lastKey() + " ; page no. = " + i.get(i.lastKey())); result is a tree map that contains several strings (t