IPad 3 sound issues after iOS 8 upgrade

iOS sounds and some apps have very little or no volume after iOS 8 upgrade.

Hello mhael, 
Thank you for participating in the Apple Support Communities. 
If you experience popping sounds and distortion from your iPad Air speakers after updating iOS, start with the troubleshooting steps in this link:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy 

Similar Messages

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • IPad connection issue after iOS 8 upgrade

    I Have an iPad 3G - WiFi-  and recently upgraded to IOS 8.  Every since connection bounces from 3G to  "no service" (AT&T provider).  I have been able to get reconnected only by choosing "Reset Settings".  I previously powered off and restarted with no resolution.   Found article that mentioned this same issue but said it only was issue in iphone 6.  Anyone else have a similar experience or easier solution?   I rely on iPad for work and really need a solution that doesn't involve frequent resets....
    Message was edited by: Raven72songs

    I have been to Apple store twice now on this issue. We have tried all of the above suggestions-- restore, network reset, re-installing SIM card-- and the problem always returns. The Genius Bar tech told me the IOS update brought out a latent problem hidden in the firmware -- in other words, it is a problem caused by Apple, but not everyone experiences this problem. The tech also told me there was nothing more that could be done, short of buying a new ipad. I asked about going back to the earlier IOS version but she said Apple will not allow that at this point. So it sounds to me like a "forced obsolescence" thing that Apple has inflicted on me: they admit their update brought out a problem, previously unmanifested, which had always been lurking in their firmware-- but their solution is that I need to ditch my ipad 2 and buy a new ipad. I never had this type of issue before the upgrade. the problem is more of a nuisance/inconvenience than anything else, because it can be rectified by powering down every few hours, so it's not worth it to me to spend hundreds on a new ipad. And anyway if this is an example of their customer service I'm not sure I will stay with Apple when it finally is time to buy a new tablet.

  • POE 3560 Issue after IOS upgrade

    Hello,
    I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
    I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
    I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
    Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
    res
    Paul

    c3560-ipbase-mz.122-25.SEE2.bin
    You upgraded the IOS to the switch?  I shudder at the thought of what old version did you upgrade FROM.  
    Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
    You've got more than enough PoE left. 
    Only two things comes to my mind:  
    1.   Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
    2.  Hardware failure - Read THIS.

  • Sounds issues after iOS 5 update

    I have been having sound issues with my apps since iOS 5 update.  Anyone having similar problems?  I have rebooted. It is the 4S.  And yes, the volume is on.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Possible Unified mailbox iPad security issue after iOS 4.2 upgrade?

    On an iPad with multiple email accounts (Gmail, Yahoo & Exchange Active Sync) you are able to forward an Enterprise email received in Exchange Active Sync out through a personal email account. This has been reproduced multiple times with the following configuration. The order of operations does not seem to matter.
    a. Setup a personal account with Gmail, Yahoo, etc. & sync email
    b. Setup Exchange Active Sync on the iPad & sync email
    c. Go into your corporate inbox on Exchange to view email
    i. Select a message
    ii. Forward that message
    iii. Double click on the from field – you will be able to select the email address that will be sending the message out
    iv. Select an external mailbox address and send it to you verizonwireless.com address.
    v. The VZW email will be received with the external address as a sender
    With all of the focus on DLP (data Leak prevention) I believe that this is a big issue that enterprises will be concerned about.

    "This is how ANY email client with multiple accounts would work?" Yes, but with the caveat that normally in the enterprise there would be controls in place (or available) to prevent this.
    It doesn't seem to be something that's getting a lot of publicity on the web but would appear to be a significant risk for companies.
    I don't think it's possible to limit iPads to only corporate mail either natively or using any 3rd party management software, so that leaves the only solution to be some sort of encrypted sandbox for corporate mail along the lines of Good Technology or similar. Unless you can force some sort of persistent VPN through some other mgmt software and monitor all traffic ... doesn't seem ideal but maybe it would work.
    Is anyone aware of any other approaches to this or other vendors in this space? Seems like with the well publicised enterprise iPad adoption that this is an issue Apple would want to address.

  • Battery issue after iOS upgrade to 4.1

    I have upgraded my iOS to release 4.1. After that my battery will be empty within a 4 or 5 hours. before the upgrade the battery works more than a day.
    Another issue is to delete emails. If I delete some mails and wait a few seconds the mail will be received again. This happens with my Mobile Me account AND for my exchange account. Before the upgrade was made all works properly.
    I have tried to reset the iPhone to factory settings and make a new configuration manually but the result is still the same.
    Anyone has an idea what kind of issue I have?

    1 & 2, common problems.
    3 - check your settings
    Apple fix the bugs?  Sooner or later. 
    Good luck.
    <Edited by Host>

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • Cannot send emails from Hotmail on my iPad appears only after iOS 7 upgrade.

    Cannot send emails from Hotmail acc on my iPad, problem occurred after iOS 7 upgrade. Message appears that user name or password is incorrect in settings but they are correct when checked.

    Try deleting and reinstalling your Hotmail email account.

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • How much is the usable storage capacity in iPad mini 16gb after iOS 7 upgrade ?

    how much is the usable storage capacity in iPad mini 16gb after iOS 7 upgrade ?

    Approximately the same as before the upgrade.
     Cheers, Tom

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

Maybe you are looking for