IPad 3 stuck in Recovery mode while trying to upgrade

I attempted to upgrade my iPad 3 and received the error message that there was not enough memory. Linked it via USB to iTunes on PC laptop (updated iTunes to latest version). Error message said unable to upgrade the iPad, my only option is to Restore. However, that will erase all my data and settings which I have not backed up. Now I'm stuck. Either restore and lose all or leave iPad as is ... only problem with the latter is that the iPad is stuck in Recovery mode and everything I have tried does not release it. Would appreciate help with this as I now have a non-functioning iPad! Thank you.

Hello ardsdon,
Thank you for using Apple Support Communities. 
I see your iPad is stuck in recovery mode. The following article addresses putting your phone into recovery mode and restoring it. 
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Regards,
Jeff D. 

Similar Messages

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • IPhone 4S stuck in recovery mode while trying to upgrade to iOS 7.0.4

    I ran into the issues with my iPhone 4S while trying to upgrade it it iOS 7.0.4 OTA and I have tried everything I can to recover it but no luck. I have tried different USB ports, different PCs altogether with av tuned off, and finally a MAC Pro this morning. I am stuck and miserable. I did everything that a number of forums have mentioned in terms of switching off anti-virus, clearing off host files, checking windows and mac firewall settings, setting the phone to DFU mode and trying over - you name it.
    The error I run into most half way through the upgrade is "Unknown Error (29)". According to Apple (http://support.apple.com/kb/TS3694), it has to do with anti-virus but last night I spent 2 hours building an image with no av or firewall running and tried and still ran into the error. Even tried "Fix it" from Microsoft to clear off the host file configurations as prescribed.
    Any help is welcome. Much needed.

    Hi, sorry for my late reply.
    FIXED!!!! For me anyway, and I hope for you!
    So I tried to update to ios 7 and after downloading the software itunes tried to update my iPad 3. I recieved the error 3004 and was stuck in the "Connect to iTunes" screen and
    could not get out of it. Completely annoyed!
    But then I remembered something from when I used to fiddle with iphones. I opened a program I had called TinyUmbrella, which can be used to force boot out of recovery mode (the
    "connect to itunes" screen).
    My ipad was still connected to itunes and in recovery mode. I opened TinyUmbrella, selected my ipad (which was just shown by the serial number), then clicked "Exit Recovery" and
    BAM!!! It immediately kicked my out of the recovery screen and started my ipad back up to my home screen.
    Now, my ipad was still on 6.1.3 since the update to ios 7 had failed. But I didn't care, my ipad was fully functional again just like I left it before. Thank God for
    TinyUmbrella! Here's the CNET link for TinyUmbrella if you need it:
    http://download.cnet.com/TinyUmbrella/3000-18545_4-75766724.html

  • Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!!

    Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!

    This writeup comes from the article referenced below it:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • HT201210 my i pad is stucked in recovery mode after trying to upgrade in ios 6 and i tunes cant restore the ipad

    i have tried to update my ipad 2 in ios 6 and since then is stucked in recovery mode and i tunes cant restore it as i receive a message about device not being eligible for the requested build
    help

    Do you have to restore your iPhone again? You could try uninstalling and reinstalling iTunes. You could also try checking out this link.
    http://www.ipadforums.net/jailbreaking-hacking-tutorials-how-guides/28716-how-re solve-itunes-unknown-error-3194-a.html

  • IPad stuck in recovery mode while trying to update it, can't reset it

    I tried to update it, got errors 4 and 14. Tried to restore it, got errors 4005, 11 and 4013. iTunes recognizes the iPad, but iTunes diagnostics doesn't. I also don't see it in Windows (even though Windows installs the drives when I connect the iPad). Apps like iPhone Recovery don't recognize the device.
    I would blame it on my cable, but it charges normally and iTunes does recognize it so I'm very confused. What should I do? I already tried a different PC, but unfortunately I don't have a Mac.

    sam as mine, stucked at recovery mode

  • Ipad 2 stuck in recovery mode after trying to update.  Is there any alternative to restoring?

    My ipad 2 prompted me to update, the screen went black and now it is in recovery mode with picture to connect cable.
    Is there anyway to save content or will I have to restore?

    You will have to restore or resync your content. Did you not take a backup prior to starting the update (it's too late to do so now) - if you did then you should be able to restore to that backup.

  • Iphone 5 in recovery mode while trying to upgrade to v 7.1.2 over wifi

    I tried to update my Iphone 5 software over wifi.
    On doing so the phone went into recovery mode after showing just 30% download on the bar and has been stuck the same way for past 2 hours.
    What can I do to make it work again?

    You should put it in real recovery mode, it's seems, it's not the case.
    Here is a link http://www.netchimp.co.uk/webdesign/iphone-ipad-ipod-touch-tips/unlock-iphone-fo rgot-passcode-synced-itunes/
    The procedure is normaly to hold on power and home button while plugged to your computer. (Section 2 of the link)

  • Zen stuck in Recovery Mode after trying to upgrade firmw

    Hello all,?My Zen micro needed firmware upgrade to the latest 2.2.02. When ran the upgrade, it got stuck after Zen re-boot. Finally, I disconnected Zen and reconnected and tried to run firmware upgrade again but the upgrade software would not recognize Zen. Windows is recognizing Zen but Firmware software does not. Now zen hard disk size is only 20 MB. I will appreciate any help.

    you want to check out this thread mate, you are not alone.
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=26842
    basically if you have got another machine that has not had any creative software on it it will work, anyway read the thread, i did mine last nite and it worked. there is hope

  • Ipad stuck in recovery mode after trying to update in ios6

    my ipad is stucked in recovery mode since trying to update in ios 6  any help?

    Hi there rmarr1,
    The only way to get out of recovery mode is by restoring the device via iTunes. If you initiated the update on iTunes on your computer, there may be a back up of the device that created before the update. Take a look at the articles below for more information.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    -Griff W.

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Hi so my ipad is stuck in recovery mode.  Once I connected to itunes to install the ios 8 software it says that its eligible for the request build and I tried the sudo nano command and that didn't work either. Please help thanks!

    Ipad mini stuck in recovery mode.
    My itunes is up-to-date.
    Sudo nano command is not working.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My ipod touch is stuck in recovery mode I tried RecBoot and the reiBoot  both fail to get me out of recovery  I get error 28 instad  now what?

    My ipod Touch 2nd Gen 8GB is stuck in recovery mode   I tried RecBoot and when that couldn't do it I tried reiBoot  both failed to fix my problem  what do you suggest?

    Start off with some basic steps:
    - Make sure iTunes is up to date
    - Try another usb cable
    - Try another usb port
    In the article Resolve iOS update and restore errors this is what it says about error 28:
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

Maybe you are looking for

  • 10.6.8 Finder keeps crashing/hanging

    Hi. I'm running 10.6.8, Mac Pro Dual-Core Intel Xeon. (purchased June 2007) Problems started about a month or so ago when my finder crashed a few times, and my external HD dismounted. This happened a few times, then my ex HD totally fried (corrupted)

  • Camera raw update for Canon 70D

    I've downloaded the update but its not working, I'm using CC any suggestions?

  • WebService Action Block Return Type

    Hi ,    I would like to know on xMII 11.5 RC2 if the Webservice can only return    it's XML data in a standard Iluminator Row Set structure or is there a way    that one can get the return XML in a cutom format i.e.     <ROOT>           <MYDATA>blah

  • Oracle SqlDeveloper Download

    Have been unsuccessful in downloading Oracle sql developer. Is it a technical problem?

  • Firefox does not open on my laptop

    when i double click the mozila firefox icon on my laptop it does not open any longer so now I use internet explorer whic is not my prefered browser. please help