IPad 3 updated to iOS 6 fails to connect to anything apple other sites OK

IPad 3 updated to iOS 6 fails to connect to anything apple, other sites OK

After installing iOS 6 failure to connect with Apple sites only, solved after advice from Apple store visit.
Back up iPad in iTunes
Reset to "Erase all contents and settings"
Restart as from new
Sync in iTunes to restore backup
All now OK

Similar Messages

  • Itunes update to firmware fails, because connection times out.

    I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now.  I have spent many, many hours on this, and many phone calls to apple support.  I disable Norton 360, and windows firewall, and my firewall on my router.  I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one.  Itunes diagnostics gives me the following information.  I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin. 
    Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
    I've tried downloading iOS 5 and then updating using restore, but that didn't work.  I've poured through support forums, and error codes: I get 1611, etc.  Cannot seem to resolve this.
    Any ideas? 
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.5.0.142
    QuickTime not available
    FairPlay 1.13.35
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.2.0
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.96
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.3.494
    Gracenote MusicID 1.9.3.106
    Gracenote Submit 1.9.3.136
    Gracenote DSP 1.9.3.44
    iTunes Serial Number 0040A7BC031F98E0
    Current user is not an administrator.
    The current local date and time is 2011-11-15 11:35:00.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 4800 Series       
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
    iPodService 10.5.0.142 (x64) is currently running.
    iTunesHelper 10.5.0.142 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
    Description:          Realtek PCIe GBE Family Controller
    IP Address:          192.168.2.2
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.2.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.2.1
    Lease Obtained:          Tue Nov 15 11:32:39 2011
    Lease Expires:          Tue Nov 15 11:32:38 2011
    DNS Servers:          192.168.2.1
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-15 11:33:52.

    Disable your firewall/security software and try again.

  • HT4623 Why can't my 1st generation iPad update to iOS 6?  Memory is not an issue.

    Why can't my 1st generation iPad update to iOS 6 when memory is not an issue?

    The first gen iPad has a slower processor (A4) than the iPad 2 (dual-core A5) and iPad 3 (dual-core A5X) and 4 (A6X), and it also has less memory - 256 meg, compared to the iPad 2's 512 meg and the iPad 3 and 4's 1024 meg. My first gen iPad got noticeably slower with iOS 5 than it was with iOS 4, so I doubt that it could cope with iOS 6.

  • When i update the ios 8.2 new apps for apple watch i dont have

    When i update the ios 8.2 new apps for apple watch i dont have.please advice

    It was the first thing mentioned in the update description that came up before you chose to click 'Accept'. iOS8.2
    You accepted, therefore you have it. Simply put it at the end of your Apps as I have done with Apps I did not want e.g.. Health, Tips, Compass etc.
    Pete

  • I bought iphone 5 and then i updated to ios but now its asking for apple id and password (this phone was registered to find my iphone) what now?

    i bought iphone 5 and then i updated to ios but now its asking for apple id and password (this phone was registered to find my iphone) what now?

    its showing like m*****@yahoo.com

  • My iphone 5 is crashing after updating to iOS 7 . It shows the apple start up screen . Need some further update from apple .

    My iphone 5 is crashing after updating to iOS 7 . It shows the apple start up screen . Need some further update from apple . It often happens when I am on a call or browsing the net on chrome . My chrome app is also updated .

    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Hi, I update the iOS and now some app are in other language

    hi, I update the iOS and now some app are in other language

    Did you change your credit card in itunes under your account to one from another country. That sometimes will change the language on your apps try This   "Click on your email address in the top right of iTunes to get to your account details, then click the "change" button next to your "Country/Region". Select a country for which you have (access to) a credit card. iTunes will ask you for credit card information when you save this country setting.

  • How can I connect to Itunes store again looks like it stop connecting. I ran the diagnotics and this is the results:Firewall Information  Windows Firewall is on. iTunes is enabled in Windows Firewall.  Connection attempt to Apple web site was unsuccessful

    I ran the diagnostics in Itunes and this is the results
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2012-04-15 22:46:58.
    Itunes just keeps loading

    Use this article to continue trying to troubleshoot this issue.
    Can't connect to iTunes Store
    B-rock

  • HT4623 Trying  to update my iPad to latest iOS. It connects to iTunes and appears to have done everything, to include restore from backup on my computer. When I disconnect from computer the iPad then starts from "Hello", "Select language", "Choose Wi-Fi N

    It then asks me to Set Up iPad and I choose "Restore from iTunes Backup" It completes the synch according to iTunes. but the iPad screen just shows connected to iTunes. When I eject from iTunes, the iPad still shows Connect to iTunes.  No matter what I do it still shows "iPad Not Set Up"  What is Up?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT201412 MY IPAD 3 is FROZEN updating to IOS 6.1.3  Screen has apple logo and bar up center of screen. What can I do?

    My IPAD 3 FROZE while updating to IOS 6.1.3 Cannot turn IPAD off, cannot connect to ITUNES. Screen shows Apple Logo and vertical  progress bar. Progress shows about 50%. Can anyone suggest a solution? Note IPAD 3 still has power and is still showing the LOGO ect. My WIFI is active as I have three other devices able to use WIFI. Thank you for your help
    Message was edited by: inclinelarryl

    See if this page helps : http://support.apple.com/kb/ht4097 - it mentions a frozen progress bar when updating, and describes putting the iPad into recovery mode and restoring the iPad via your computer's iTunes

  • HT204291 apple tv update and iPad update to iOS 8.2 broke airplay

    First I updated my iPad (2) to iOS 8.2. When I noticed that movies did NOT play from iBooks.
    I checked for an Apple TV update. There is one today, so I did that. Now there is NO AIRPLAY option on the iPad!
    Am I missing some new setting or did Apple break AirPlay?

    between restarting my ipad and restarting my apple tv, it's working again.  However, movies in iBooks are still broken!

  • Since updating to iOS 5 cannot connect to wifi

    I could connect to my home wifi with no problem until I updated to iOS 5 Now it never makes the connection  - it never ticks the connection just shows a spinning wheel
    3G works OK
    Any help gratefully received

    Thanks I have tried that but no success
    I have also tried forgetting the network and reconnecting and switching the wifi and mobile data on and off
    My wifi is using WEP 64 bit security
    Any other ideals?

  • HT4623 original ipad update for ios 5?

    Can the ios be updated to ios 6 for the original ipad or am I stuck with ios 5.1?

    ...if you wanna change tires within a couple of years, then a car may not be for you.....
    that's about the same.
    I defenitely like the quality of Apple, no discussion!! however I have quite some hardware (PC's, tablets, phones, laptops) some on windows some on Android, and of course my iPad-1 on iOS5.
    It's not about the OS.
    Untill now I never had to change/replace my complete hardware...Okay maintenance is needed and every software comes to an end. But one of my laptops still works on windows (12 years old)... It's not the fastest one but works with all the installed software. The iPad is only on the market since 2010 (27th januari to be precise!!).....talking about the duration of support.......
    Anyway, I stick to my opinion that commercially it's not a good thing (at least not for me) with the current pricing of so called new hardware....

  • HT4623 Why doesn't my old original iPad update to iOS 6?

    My old original iPad will not update to iOS 6

    That's right, it can't and won't. If you read the tech descriptions of the OS you'll stumble across some section called "iOS 6 Is Compatible With ...", which will not include the original iPad.

  • Remote DP not installing, failed to connect with the remote Distribution Site

    Hello everyone, and thanks in advance. In attempting to install the DP role to a 2008 server, I get the following errors in the distmgr.log:
    DPID 16777369 - NAL Path ["Display=\\server-name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\ , ServerName = SERVER-NAME, DPDrive = , IsMulticast = 0, PXE = 0, RemoveWDS
    = 0          
    SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:28 AM  
    8656 (0x21D0) Translated server name Server-Name to server.name\Server-Name.            SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0) CWmi::Connect() failed to connect to
    \\Server-Name\root\CIMv2. Error = 0x800706BA            SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0) STATMSG: ID=2391 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CR-S-SCCM2012.cr.nws.noaa SITE=CR1 PID=8796 TID=8656 GMTDATE=Tue Apr 08 13:08:30.327 2014 ISTR0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM            8656 (0x21D0)
    DPConnection::ConnectWMI() - Failed to connect to  SERVER-NAME.  SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM     
    8656 (0x21D0) Failed to install DP files on the remote DP. Error code = 1722 SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM        8656
    (0x21D0) STATMSG: ID=2370 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CR-S-SCCM2012.xxx SITE=CR1 PID=8796 TID=8656 GMTDATE=Tue Apr 08 13:08:30.328 2014 ISTR0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"
    ISTR1="SERVER-NAME" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\Server-Name\"]MSWNET:["SMS_SITE=CR1"]\\Server-Name\"    
    SMS_DISTRIBUTION_MANAGER            4/8/2014 8:08:30 AM   8656 (0x21D0) Will try again after 20 minutes ...         SMS_DISTRIBUTION_MANAGER           
    4/8/2014 8:08:30 AM   8656 (0x21D0)
     I understand that 0x800706BA is RPC server unavailable, but I don't know how to fix it. I have done the following:
    Ensured the SCCM server account is a local admin on the remote server
    Ensured the Fire Wall service is not running on remote server
    Tested with wmimgmt.msc and wbemtest, which worked fine.
    Telneted on port 135 from site to server, which worked fine.
    IIS is installed, basic authentication...
    I am at a loss. Any ideas?
    Ashley!

    Hi Ashley,
    You can use Network Monitor and run it on the remote DP at the time ConfigMgr is attempting to install the DP role to capture more information on what may be causing the issue.
    Here is the download link to NetMon -
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    And here are some how to's on using NetMon just in case:
    http://support.microsoft.com/kb/812953/en-us
    http://blogs.technet.com/b/netmon/p/usagevideos.aspx
    Best of Luck,
    -Matt

Maybe you are looking for

  • Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

    Hi Experts, I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007). My requirement is automate using powershell scripts the below things. 1. Create a SQL query in Access DB and sa

  • How can I transfer songs from Ipod to Itunes library?

    I recently lost my entire Itunes library but still had songs on my Ipod. Now when I try to rebuild my library by transferring songs FROM my Ipod TO the Itunes library, I am unable to. There are a million help subjects of how to transfer your songs fr

  • ITunes match and iTunes radio skips songs on wifi

    iTunes match and iTunes radio have been skipping songs while on wifi. We have a Linksys EA6350 setup in WPA2 personal for both the 2.5 ghz and 5 ghz networks. Both are setup as mixed 802.11n/ac with both on a channel width of AUTO. We are using two A

  • Remote desktop software

    Is there any iPod touch app to control yer pc like remote desktop on the pc? Also how do you stay logged in to this site? It keeps asking me to log in each time I come back and try to post. Is there anyway to have flash work the www?

  • Weblogic JNDI lookup in Applet

    Hi We are facing problem in JNDI lookup inside the applet here is the scenario We have two weblogic servers(port 7001) one server is main server where the Applet1 , weblogic.jar and app.htm are in C:\bea\wlserver6.0sp1\config\mydomain\applications\De