Ipad 3 volume very low just bought it one month ago! Running ios 6 is thatbthe cause i read somewhere it is the cause!!

Please help.. And yes if there is a problem will it be changed i mean will my ipad be fixed or changed by apple?

While none of us here can say with certainly, it's likely that iOS 5.1.1 is the last version of iOS that an iPad 1 will run.
As to a "waste of money", has your iPad stopped working just because a new version of iOS was released that the iPad won't run? Our iPad 1s haven't just ceased fallen over, even though they can only run iOS 5.1.1, and are in valuable use every day. But perhaps yours did indeed somehow stop being useful. If so, I'd recommend selling it and buying something else that you think would better suit your expectations.
Regards.

Similar Messages

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • What should i do my iphone4s dosent have warranty but it  drop calls i bought it 4 months ago i dont know what to do because i dont have the recipet either

    plz help me i wasted $700 on a iphone4s i bought it on no contract,  i worked so hard for the money i would really appreciate if you guys could help me out it drops calls and it reboots itself after every half an hour

    Where did you buy it without a warranty?
    Try entering the serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • My home button not working...not becauze the version,it's like broken, how can i fix it?i'vs just buy it 4 months ago

    My home butyon is not working...not becauze the version,it's like broken, how can i fix it ? I just bought it 4 months ago.
    Thanks

    i have that same issue, i recently had my ipod sent off to apple and they sent me a refurbished ipod, all was great till i discovered that my home button was not very responsive like it should be. If you have any luck finding out how to fix this problem will you please pass on the information. And i will do the same as to how to fix the issue and passing along the information
    Thanks
    Thomas

  • I just dropped my new macbook pro on the ground, it dents a little. So can I bring it to apple store, and repair it for free? I bought it just one month ago.

    I just dropped my new macbook pro on the ground, it dents a little. So can I bring it to apple store, and repair it for free? BTW: I bought it just one month ago. Thank you very much

    No, user caused accidents are not warranty coverage,  nor are spills, loss, theft etc.
    all these user caused issues have no bearing on the warranty coverage.
    they are outside of same.
    All laptop mfg. are identical in this nature  (same with your car too of course)

  • I had an Ipad 1. I just bought an Ipad3. How do I transfer all my apps and data from my Ipad1 ti Ipad 3?

    I had an Ipad 1. I just bought an Ipad3. How do I transfer all my apps and data from my Ipad1 to Ipad 3?

    See Here  >  http://support.apple.com/kb/HT2109

  • Bought an app one month ago. Now it demands that I repay the subscription fee for it. Tried to report problems on iTunes and just get referred back to Apple Support website. What do I do?

    Bought an app one month ago. Now it demands that I repay the subscription fee for it. Tried to report problems on iTunes and just get referred back to Apple Support website. What do I do?

    Micromedex Drug Interactions. The app itself is free. A one year subscription costs $9.99. It worked fine for a month. THen an "update" was automatically installed and it now demands a new $9.99 payment. Thank you.

  • Incoming ring and text volume very low!

    hi, have recently noticed that when i lower volume level for music,video,games,other media, it also reduces my ringtone and notification volume level too! (even though the slider bar level is on max for ringtones,notifications.) so if for e.g i lower video volume on youtube etc, it takes my incoming call and text volume down too! this never use to happen and only noticed when i saw led missed call,text, flashing.try your own z3c?
    settings-
    sound-
    volumes-
    music,video,etc (on low)-
    ringtone&notification(max)
    ok.
    now check incoming call,text volume (very low on mine) so i have to reset music,video,games etc to max to hear incoming calls,texts but i dont want max volume for music,video,,,
    b.t.w I'm still on kitkat 4.4.4 but as i said the volume levels could be individually adjusted since out of box.
    now strange thing is my mate has the xperia sp and i checked his yesterday and he had same issue (jellybean) and because his volume level on video,games etc is low but max on ringtone,text he too misses calls and texts! (unless of course he sets max volume on the video,games). also using volume on side of phone has no effect either.
    any ideas?
    cheers.
    Solved!
    Go to Solution.

    Have you looked here?
    https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Feeback-Lollipop-on-Z3-Z3-Compact/m-p/959223#U95922...
    There are common issues that people found.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • My iPod speaker is broken, i bought it one year ago, can you fix that for free?

    my iPod speaker is broken, i bought it one year ago, can you fix that for free?

    You are not address ing Apple here, we are all just users like yourself.
    If the headphones work but not the speaker:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If the speaker still does not work, make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. The Apple warranty is for one year unless you purchased the optional Applecare extended warranty
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Ive got an issue, i cant download a think because it says my disc space is all used.. ive only just bought this macbook.. i go to disc utility and there is macintosh HD at the top, it says i have no spece under that there is another saying ive usedon 39mb

    ive got an issue, i cant download anything because it says my disc space is all used.. ive only just bought this macbook.. i go to disc utility and there is macintosh HD at the top, it says i have no spece, there is another available macintosh HD that i can click on and that tell me i have only used 39GB out of the 500. to make this abit more confusing, the one that tells me i have no space says its type says its a logical volume group, the other with space tells me the .

    You've encrypted the boot volume with FileVault, so the reading in your first screenshot is normal. The reading in your last screenshot shows that you have plenty of disk space.
    A false "disk full" warning can result from moving a Safari download between folder while it's in progress. Is that what you did?

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound??

    I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound?

    Not all the sound docks accept both analogue and optical on the auxillary input - I don't think the portable ones does but may be wrong - check the user manual.
    As I said earlier all the mini optical (min Toslink) adapter does it make the optical connector fit a smaller socket, it does not convert digital audio to analogue for an analogue only auxillary input.
    AC

  • I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

    I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes  how do I make the layers and tool bars bigger?  Please help@

    Windows will scale applications display or windows will not scale application display depending on how the application is coded.  Photoshop is coded in a way that its display is not scaled by windows.  Photoshop knows about your displays high pixel count not its resolution  so it uses its pixels  however it does not scale its UI to make it usable on your display.  Other application let Windows  scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels.  The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays  2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
    The reg update  and external manifest file  effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size  in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution.  Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768.  Photoshop UI would not fit on the Surface Pro 3 display..
    Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display  3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

  • Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

    Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

    Before installation you should back up all your data.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Maybe you are looking for

  • Windows 8.1 with bing : restrictions

    You should be able to do local policies on these, but you would have to manage them as individual local policies. They should also support Windows 10, and if you are feeling the challenge, and have the licenses, you can try to upgrade the license to

  • CMS Photo Gallery

    I need to create a Photo Gallery for a client who wants access to change images in the albums. The gallery contains about 6 albums and I am not sure how many pictures per Album It obviously needs to be as full proof as possible so that the user can c

  • Error in sending Idoc ::  Urgent

    HI we are trying to send Idoc DELINS and ORDERS to SUS system. when sending the idoc the following error occurs in SUS StandaredMessageFault An error occured within XI interface: An exception with the type CX_GDT_CONVERSION occured but was neithered

  • HTTP Receiver Adapter : Dynamic URL

    Hi, I have a scenario where I wish to build a dynamic URL for the HTTP Receiver Adapter. The URL will contain a customer number which is present in the mapping. The help seems to suggest that this is possible : <i>If you want to use an HTTP destinati

  • Calendar year/month

    Hi, The csv file has the calendar year/month as 200801. But when the data is previewed in the datasource, it shows as 20.0801. What could be the reason? The conversion exit used is PER16. Also, Fiscal year/period has 2008010.It shows in the preview a