Ipad 3 wifi got gim/greyed after update to 6.1.2

My Ipad 3 got greyed after 6.1.2 update.. Is this some kind of normal problem for Apple products?

Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
 Cheers, Tom

Similar Messages

IPad Mini wifi not working even after updating to 6.0.2

I have updated my ipad mini to 6.0.2 still it says "Unable to join the network". I have tried everything possible Restored it to the factory settings, erased network settings, hard reset ipad (as told by apple personnel). Also the following, as suggested by many:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best)
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
Have also, removed encryption settings from my router even in that case it does not connect. HELP PLS !!!!

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

My Iphone 4s WiFi button is grey after the iOS 7.1.2 update

I can't connect to the internet because my WiFi button is grey after I updated to iOS 7.1.2.

You did this? If you still can't turn Wi-Fi on, please contact Apple for support and service options

My screen got totally white after updating to Yosemite

Uploaded the Yosemite to my IMac.
When installing the new update (running OS10.6.8 before) the computer restarted during installation.of program.
After that the screen is just totally white. What happened and what shall I do?

Thank you.
I’m writing from a PC at the moment.
Thanks for the answer. I can’t save anything now, the computer is ‘dead’ it is a shame on all I have on the computer.
And all this problems because of my banc who wanted my to update in order to put in a special identification program.
Who shall I blame?
I have to rebote my computer.
I am crying… ☹
Harriet
Från: Apple Support Communities Updates [email protected]
Skickat: den 17 februari 2015 22:44
Till: Aqua Produkter
Ämne: - My screen got totally white after updating to Yosemite
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Kappy<https://discussions.apple.com/people/Kappy?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
My screen got totally white after updating to Yosemite<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871>
Can you reboot the computer to Snow Leopard? If so, then re-run the Yosemite installer application. It should be in your Applications folder.
If you can't, then you need to erase the drive and reinstall Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1<http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FDL1399&answerid=16777216&src=support_site.downloads.search>.
Correct Answer <https://discussions.apple.com/email/thread/6836494/correct/27684871> Helpful Answer <https://discussions.apple.com/email/thread/6836494/helpful/27684871>
Use the buttons above to tell Kappy and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Kappy, go to the discussion<https://discussions.apple.com/message/27684871?ac_cid=op123456#27684871> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Why the Flash on my IPad 2 Camera does'nt work anymore After updating to IOS 7?, Why the Flash on my IPad 2 does'nt work anymore After updating to IOS 7?

Why the Flash on my iPad 2 Camera doesnt work anymore After updating to IOS 7??

No iPad has ever had a built-in flash for the camera.

My ipad 2 wifi got stolen today, can't locate it via icloud. what do i do?

my ipad 2 wifi got stolen today, can't locate it via icloud. what do i do?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

I want to ask you if i will buy the ipad mini wifi from this site,after can i use it in Europe without problems?

i want to ask you if i will buy the ipad mini wifi from this site,after can i use it in Europe without problems?
Thank you

Wifi is wifi (generally) and you should be able to take your american bought device (presuming that's what you mean) to europe and get it online.
The biggest issue you may face is to make sure you have a plug adapter. Your power brick is rated for world wide power variances you'll just need an adapter to make the plug fit eurpoean plugs.

HT4623 My ipad mini went to restore mode after updating. when i try to restore downloading software gives error

My ipad mini went to restore mode after updating. when i try to restore downloading software gives error

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Apply the combo update
http://support.apple.com/kb/DL1640

IPad 2 will not turn on after Update 6.1

I've read a number of discussions on the issue, but have yet to find a solution. I am using an iPad 2 (version A1395).
I tried updating to iOS 6.1 over WiFi. It seemed to download well enough, but when it got to the installation, it kind of fried my iPad. It will not turn on. I have tried all of the following:
1. Pressed the Home button (also tried holding it down).
2. Pressed the Power/Sleep button (also tried holding it down).
3. Pressed both at the same time (also tried holding it down).
4. Held the Home button while connecting to a PC via USB.
5. Held the Power/Sleep button while connecting to a PC via USB.
The only action that gets any response from the iPad is plugging it into power brick via USB. The Apple logo will appear briefly, indicating that it's powering on, and then it shows the "Connect to iTunes" graphic. Nothing more. If I unplug from the power brick, the screen turns off. Plugging it into a computer after that does nothing.
Any ideas?

I had this same problem with my iPad 3 (Verizon 4G, wi-fi) when I did IOS 6 update wirelessly last night. I could only leave one device at a time attached to my computer, so I left my iPhone 4S plugged in to the computer and updated to IOS 6 via iTunes. The iPad was updated over my home wi-fi network and plugged in to the charger. I was prompted to enter my Apple ID & Password on both devices and appeared to have successfully upgraded to IOS 6 on both devices. I even was browsing in briefly in the new Safari on the iPad to make sure it was working, then left it to finish charging overnight.
I left both plugged in overnight and when I woke up this morning, the iPhone was fine and the iPad won't turn on. I tried the remedy here by holding down the power & the circle button in front for 2 mins and still didn't go on. Please help!

Problems with Wifi on iphone 4 after updating ot iOS 5.1

After I update to iOS 5.1 is started having problems with my home wifi.
After the update every thing seems to be running alright after after a day my connection was lost.
When I tried to reconnect I got the message "unable to join the network".
I tried the following things:
- Forget network, reconnect: This did not help
- restart iPhone: did not help.
- Reset network settings: did not help.
The next step I tried was to restart my router.
This solved the problem, but after 1 day I have the same issue.
When I go to work there is no problem when I get back home same thing over again.
This is going on ever since I update to iOS 5.1
Before the update I had no problems.
Does anyone have more perment solution.

I have the same issue with my iPhone4 running ios5.1. I have tried everything you mentioned above as well as updating the firmware on my router, setting my router to broadcast on 2.4GHZ or 5GHZ exclusively, assigning my iPhone a static address as well as a multitude of other mentioned fixes. I have determined this is NOT an issue with my WiFi Network, or Router. All other wireless devices in my home do not have this issue; except for my partner's iPhone4S also running ios5.1. It's WiFi issues are identical to mine. Our other Smartphone, an HTC running Android, has no WiFi issues whatever.
When I attempt to use WiFi on other networks with my iPhone4, I encounter the same issues: Intermittent connectivity,reporting that it is "Unable to Join Network", showing a strong WiFi signal on screen and yet having no WiFi connectivity, showing WiFi connectivity on screen and strong signal strength, and having no IP Address(etc) under WiFi Networks Settings. After spending a great deal of time online looking for solutions I have determined the following:
This is clearly an Apple Hardware or Software issue. I hope Apple eventually addresses this issue because it is extremely frustrating!

Ipad mini will not remember passwords after update to iOS 8.0.2

My ipad used to remember forum user names/passwords but after updating first to ios 8 then to iso 8.02 it no longer remembers them, I have gone to Safari then passwords/auto fill and all of the green sliders are activated.
I tried login on then creating a new short cut but it does not help.....can anyone help?
Thanks.

Hello F4DHL1,
The article linked below details a number of helpful steps that can assist with restoring full functionality to your iPad's cellular data connection.
Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model)
http://support.apple.com/kb/TS4249
Cheers,
Allen

IPad Air not showing full screen after updating to ios 8.2.

How do I reset the screen to show all items on screen while in Safari? Screen seems to be "cut-off" after updating to ios 8.2. Also cannot view Yahoo in Desktop view. It only shows in mobile mode,

When on Yahoo, tap on the address bar once...a drobox box containing icons of your favourites should appear. Hold your finger anywhere on the box & pull down,,,you should see 'Request Desktop Site' under the address bar...tap on that & the desktop site should load.
Is your Safari screen cut off a bit at the sides? I notice that too on certain websites & usually switch my iPad to landscape mode which allows me to view more of the page without having to scroll sideways.

Wifi connection alway disconnect after update to iOS6

After update to iOS6 for a month, I found the wifi connection alway disconnect and need to reconnect severaly times. Plese help to suggest for setting up.

Hello there cyldevil,
I would recommend using this article if the Wifi is grayed out in settings.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Here is also some additional info on troubleshooting wifi in general on your device from iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/ts1398
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
All the best,
Sterling

Ipad 3 wifi got gim/greyed after update to 6.1.2

Similar Messages

Maybe you are looking for