Ipad 3G 64 GB + Trouble with APN Setting
Why the APN settings(APN, username, password) are lost after about 1 hour working with 3g internet? When I retype my settings again they are lost again after 1 hour working.
try: Settings - General - Reset
Reset your network setting, reboot, then re-Enter your APN again.
Similar Messages
-
Having trouble with intial set up
having trouble with initial set up!
Hi jandra31 and welcome to the forums!
You'll need to provide us with a little more information. At what point during the setup are you encountering a problem. What, exactly, is the problem you are encountering? Are there any messages? -
Hello !
I've got a real trouble with my dns configuration... and i can't understand! so, i need some help....
well, qutie newbie in mac os server, i run in on a G4, and i had not noticed any trouble until i've decided to run open directory as a master with LDAP, wanting to have a kerberos protection for the users.
Kerberos doesn't want to play with me !
I've been in console mode to have a look, and, actually i've seen this :
"Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no name available via DNS for 192.168.0.109
Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no reverse DNS entry for server, various services may not function properly"
Ok... my DNS has a trouble... but i don't know how to fix it ! Is there anybody in this world who can help me?
I don't want to have a real DNS for my little server... but i understand that my config is not good. I can understand that having a caching DNS can improve the quality of my config, and, in other hand that it is necessary for having the services of OSX server in an effeciant way, but i don't know the way and the parameters i've to put in my config to fix it.
Now, just some words on my config...
First, i've got an adress provided by my FAI (the frenchy workd for ISP, i think) is "193.252.209.135". This adress is set on a d-link modem router via PPOE. The DNS of my provider (wanadoo.fr) are 80.10.246.1 and 80.10.246.132.
After this there is my G4 With mac osX server.
• en0, the "extenal gate" and the internal ethernet on the computer is plug on the modem with the adress "192.168.0.109". the router is set on "192.168.0.1". the dns are 80.10.246.1 and 80.10.246.132.
• en1, the "internal gate" for the network, an PCI card in the computer, has the parameters : adress "192.168.3.1", subnet "255.255.255.0", router "192.168.3.1". no dns records. (no VPN service for the moment). After this, i've a switch for the macs behind the server. (without any link agregation)
All those parameters have been set by the gateaway assistant.
And now the parameters inside the admin server :
DHCP : en1 - adress from 192.168.3.2 to 192.168.3.254, name 192.168.3. no static card. Router 192.168.3.1. No name for domaine by defaut, name servers 80.10.246.1 and 80.10.246.132 No LDAP, no WINS.
DNS : No zone transfert, recursivity is ON. No zone records.
NAT : set on full, Transfert and Network Address Translation.
When i've been on the terminal, i had those information:
"wakan:~ st$ sudo changeip -checkhostname
Password:
Primary address = 192.168.0.109
Current HostName = wakan.local
The DNS hostname is not available, please repair DNS and re-run this tool."
All my "main" services are working fine (AFP, Firewall, DHCP, DNS, Update) Open Directory is running without Kerberos. By the way, all the macs after the G4server can have a corect access to internet, and share information via LDAP of Open Directory, but i've to say that, a couple of days later, a friend of mine, who has a PC computer, can't have a DHCP dynamic address when he plug on my little network. I think that it is an other trouble, and i've decided to have e look to this later... but if someone knows how to resolve it...
So here begins the nightmare for me... so if anybody can help me... i realy need some help to fix this mystery!!!
Special thanks!As the router modem is already doing NAT why use NAT in the server?
If you want to use OpenDirectory and other services you should/need to set up the DNS correctly using the server's private IP (and others in the same range the server is setup with). The domainname used internally can be different than your public one.
And then use the server as the only DNS for you LAN clients and the server itself. Forwarders (your ISP DNSes) in /etc/named.conf usually speeds up lookups of external addresses (also turning off IPv6 can help that too). -
I have the new IPad and am using it with the verizon mifi2200 wireless and when i am using apps the location services cannot find me wifi is working and location services is on this does not happen when i am using a wifi that is at my office or in hotels does anyone know anything about this because verizon dosn't?
iOS 5: Understanding Location Services
http://support.apple.com/kb/ht4995
Cheers, Tom -
I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.
Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
IPad 2 16 GB trouble with apps
Just bought an iPad 2 16GB and downloaded ONE free book app and it is having trouble loading and playing it, can this iPad take apps at all?
It may be the particular app that is suspicious. Or it could be the other stuff (e.g., photos, movies, music) that you might have on your iPad.
Check out Settings > General > Usage to get a first glimpse of what might be tying up your iPad if you suspect a storage shortage. -
Trouble with iPod setting screen
Right, Ive got all my music on my 5G 30gb iPod, the problem is, I also have a movie I want to put onto my iPod but Im not having much luck with it. I successfully coded the movie using HandBrake, and its currently under "movies" in my library. However, when I connect my iPod to my laptop, the iPod settings screen only brings up the Summary, Music, Podcasts and Contacts tabs. Also under the devices, it only has my iPod and its music. This does not give me the option of adding Photos, Movies or Games. I have iTunes 7.0.2 and Im sure the iPod is up to date because I only recieved it yesterday for Chrismas. Any ideas why and how I can get the Movies, Photos etc. under my devices and on my settings screen when the iPod is connected? Your help will be appreciated.
Try this: http://support.apple.com/kb/ts1567
-
Im on an iPad, and am having troubles with iMovie.
When i turn my ipad sideways to get the video clips on the left side of the screen, instead of just getting a long version of the video i selected, i get a list of all of my videos on my device. Not only that, but even if i did know how to fiz that problem, i still am unsure of how to select a small part of the clip instead of the full hour long video. Can anyone tell me how to fix these??
There is no way to crack the passcode. You'll need to play the iPad in recovery mode and restore it to its factory settings.
Plug into PC/Mac or wall charger, Hold home + power button until the Apple comes up, Release the power button, continue to hold the home button for 30 seconds.
Restore from within iTunes -
Trouble With Grub - Setting up Triple Boot
Before I had Arch running on my desktop, I was using Ubuntu with Vista on the same disk and XP on another one. When I moved to Arch, I backed up menu.lst to preserve the entries, and installed Arch over the same partition that Ubuntu was on.
However, after I restored the entries for Vista and XP, I wasn't able to boot to them. A few weeks ago I absolutely had to do some work under windows, so I swapped out my XP disk and installed Vista on it, which got rid of the grub install in MBR and I used vista for about a week. I reinstalled Grab after that, and wasn't able to configure grub to boot to the new disk that had vista on it, only to Arch.
I'm more or less at a loss as to what may be wrong with my entries, the locations are correct but it just doesn't boot them for some reason.
Here is the output of fdisk -l:
Disk1:
sda1 is The original Vista install
sda4 is Arch Linux
sda3 is /boot for Arch linux
sdb1 is the new Vista install
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1f0b226a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 7359 59111136 7 HPFS/NTFS
/dev/sda2 9245 9729 3895762+ 82 Linux swap / Solaris
/dev/sda3 9184 9244 489982+ 83 Linux
/dev/sda4 7360 9183 14651280 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2edf2ede
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 30400 244187968+ 7 HPFS/NTFS
Disk /dev/sdc: 300.0 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x889d889d
Device Boot Start End Blocks Id System
/dev/sdc2 * 1 36481 293033598+ 83 Linux
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000efff1
Device Boot Start End Blocks Id System
/dev/sdd1 1 121601 976760001 83 Linux
Here are the boot entries in grub:
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-uuid/28e57cc7-2ae6-423c-b2ba-18a48b79433b ro vga=331
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-uuid/28e57cc7-2ae6-423c-b2ba-18a48b79433b ro
initrd /kernel26-fallback.img
title Windows Systems
root
title Windows Vista 64-bit
rootnoverify (hd0,0)
chainloader +1
savedefault
makeactive
title Windows XP Professional
rootnoverify (hd1,0)
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
savedefault
makeactive
Any help or insight into what may be the issue is greatly appreciated.
Edit: I should mention I did some fiddling around trying to get the second vista install to boot by changing the location of the vista entry to (hd1,0) with no luck.
Last edited by Ashex (2009-02-28 22:02:27)You need to change your menu.lst. I have windows 7 on my first partition, ie sda1. Arch linux is on the second partition, ie sda2:
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/01c08dbe-bfc1-4b41-95d6-3abd118b42a1 ro
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/01c08dbe-bfc1-4b41-95d6-3abd118b42a1 ro
initrd /boot/kernel26-fallback.img
# (1) Windows
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1
Make sure that you use (hd0,0), which is the first partition. Change the harddisk boot order in your BIOS. If you want to boot the second harddisk, this is the way to do it I suppose:
title Windows Vista 64
map (hd0) (hd1)
map (hd1) (hd0)
makeactive
rootnoverify (hd0,0)
chainloader (hd1,0)+1
Read more about it here:
http://forums.opensuse.org/install-boot … d-hdd.html
Last edited by ahcaliskan (2009-02-28 23:04:38) -
Trouble with WEP setting up HP7410xi
I'm switching wireless routers and my HP 7410xi won't accept the WEP. My default WEP that came with router is 7 letters and 3 numbers and the error message says..."INVALID WEP KEY...Key must be 5 or 13 characters OR 10-26 length with 0-9 A-F (Hex)".
I have restarted the printer and the router as well as restored to wireless default.
Help!You know that WEP is not in the least secure, right? Your printer should work with WPA.
Switch your router's settings to WPA and create your own password for it (use numbers and letters, upper and lower case - at least a dozen characters).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'
That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.
-
Has anyone started having trouble with google calendar syncing / showing up on their iPhone 4s or iPad 2? As of today it no longer shows up. Thanks.
Let me re-qualify my issue. Under my Google Calendar account I have the main calendar I originally set up when setting up my account. I then set up several other calendars under this same account such as events, work, family and so on. All the calendars showed up on my iPhone and iPad with no problem and worked great for a year and a half now until yesterday. My main calendar does still show up but the others no longer appear on my devices. Going on line to look at my Google calendar/calendars everything is fine with all of them. Any thoughts as to why they no longer show up on my iPhone or iPad? Thanks again.
-
Where can I find the SSL function on the iPad mail - having trouble with AOL sending e-mail out
Where can I find the SSl function on the iPad mail - I am having trouble sending out e-mails on my AOL account on the iPad - no trouble with the MacBook Pro?
Under the line where it has the SSL button, is Authintication set to password? and the line below that, is there a server port number? A typical outgoing server port number is 25.
-
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
my ipad is having trouble with my music... i had recently gotten a new one when i signed into my icloud the music that i had on the orignal one was not there.... some songs were in fact there but not clickable ( it was there only gray)... i was looking for help on how to get the music on the ipad
-
I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?You might not have enough space left on your hardrive.
Maybe you are looking for
-
Search help for a field in a web dynpro app
Hi All, I have a web dybpro application where I need to add a field on the selection screen, the field that I need to add is USR02-BNAME. I have added the required field on the screen but now I need to have a F4 help for the same but when I looked US
-
How to open Content in Desktop Innerpage from Portal Favorites IView
Hi. We would like our Portal Favorites to open in the desktop inner page instead of a new window. Is there any chance to configure this ? Thx for your help, Dirk
-
Tags/flags for songs - feature request
Hello everybody, I've been using itunes for years now and am pretty happy with it, except for slow performance in .7 - also becasue of a large library. What would you think about a feature that allows to set flags/tags for each song, like in blogs or
-
Just downloaded iWork. In Pages, when I open one of the sample template pages, instead of my name appearing, it shows my daughter's name. Not sure why the app has picked up her name...it is not on any account and I did not use it to register...also c
-
Advice needed regarding best practice
Hi - curious as to if what i have setup now should be changed to best utilize Time Machine. I have iMac with 750GB drive (a small chunk is partitioned for Vista) - lets assume I have 600 GB dedicated for the mac. I havetwo firewire external drives -