IPad 3rd gen screen brightness drops in use

During use (on battery and whilst plugged in and charging/charged) my screen brightness drops out suddenly to the point you can hardly see what is on it. I have to power down to standby and then switch back on to get the screen brightness up again. It happens under all light conditions in natural and under artificial lighting and doesn't appear to be related to the background light level.
Any ideas?

Apple will provide a replacement iPad for about 1/2 the cost of a new iPad. You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
May be similar repair services in the UK.
 Cheers, Tom

Similar Messages

  • HT3302 My iPad (3rd gen) screen was broken, and i don't know how to replace or repaire it

    I don't know how to contact to support team of apple
    My iPad was broken and i don't know how to repaire it.
    Any assisstance ???

    Take it to an Apple store or contact Apple by phone.

  • HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

    I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • I bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly . Can anybody help.

    i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.

    Do you clean your iPad screen?  Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended.  There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.

  • Unable to use iCloud Backup on iPad (3rd gen) Wi-Fi, iOS 6.0.1

    Hi, I have been unable to use iCloud Backup for several weeks on both my iPad (3rd gen) Wi-Fi, iOS 6.0.1 & my iPhone 4, iOS 6.0.1
    iCloud Backup is set to On on both devices. It did backup once or twice, since I installed the iOS 6.0.1, then it stopped working altogether.
    I hope someone can help me.

    I know. In my post I said ....
    "remove the all day event or change the event from all day - in whatever application on your computer that you sync the calendar from and them sync again to remove the event from the iPad calendar."
    You will need to do this from your computer. If you do not use your computer to sync with iTunes, you will not be able to get around this.
    However, I should have asked of this only happens when you are trying to view events in March, so maybe I misled you. I apologize. Try this now. Quit the calendar app completely in the recents tray and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPad 3rd. gen blinking screen

    One week ago, I was using ipad 3rd. gen model A1430 and the screen started blinking and suddenly became black.
    I turned off and reseted the device.
    But since then, it keeps doing the same thing, and sometimes it takes me a long time to turn on.
    Any thought?
    I don't have Applecare protection.
    One more question: Would Apple accept this iPad as part of payment for a new one?
    Thank you
    Joao Ferreira

    Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data You may need to do this more than once. Bsydd uk

  • IPad (3rd gen) loosing screen response while in media shared movie

    iPad 3rd Gen - iOS6
    Native Videos App
    Home Sharing Videos
    iTunes 11
    Mac Mini - Late 2006 - Snow Leopard
    When using the videos app on my iPad to watch movies that are stored on my MacMini (same network) there are some occasions where at a random point of a movie (usually about 5 minutes in) I loose the ability to touch the screen… the home button still works but for some reason the video still plays even though the videos app is no longer in the foreground. To make matters even more confusing I can double press the home button and "kill" the videos app… which usually does just that. But I can still hear the audio of the movie playing over the internal speaker. I can kill every application running and the videos still won't quit and screen touch won't work while the videos app is loaded. The only way to get the video to stop playing is to turn off the wifi and let the buffer run out.
    I'll try and get a video of it, as this does sound confusing… especially if others haven't experienced it. It really only started acting up in iOS6. Any ideas?

    Issue still the same even after iTunes making its own 'version for iPad/Apple TV'

  • IPad (3rd Gen) From last one week it's screen jumbles up at times and also getting some burning smell out of it.

    iPad (3rd Gen) which I purchased 3 week back in Bangalore. From last one week it's screen jumbles up at times and also getting some burning smell out of it. Any idea what could be wrong?
    These are the some of instances of screen jumbling I faced
    1) all the app icons stacked up on top left corner. I could move them anywhere on the screen but could not start the app. Later killed all apps and starting iPad rectified it.
    2) starting any app was giving blank screen, restart rectified it
    3) home screen and lock screen both merged up. I could see both of them together whenever I swiped on the screen. Again restart rectified it.
    Can I get replacement of this piece, I believe there is some serious hardware issues in it.
    Rakesh

    Handed over iPad to support group named "imagine"in Bangalore Saturday evening. There is no direct support available from Apple in India. Know what.. These "imagine" guys are highly incopetent..
    When I checked the status in evening, their reply was that there is no issue with iPad, even though burning smell was still threre if I keep the nose close to iPad, but during working for 4-5 hours it starts building up.
    When I asked how did they tested it, reply was that they kept playing games on my iPad and they didn't find any issue.. Rediculous answer..
    They even didn't bother to open up the piece or running test of full CPU/RAM and Graphics utilization. Now asking me to take it back to wait for either complete breakdown or burndown, no matter where I am.. Airport, hospital, client meeting..
    I use my iPad mostly for client presentations, I don't want to be in a situation that the display again jumbles up during a demo session giving impression  that the problem is with our application..
    I wish I wouldn't have invested in this device through BYOD program..

  • I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    Hi thanks for the encouragement.  It's not that the severs are "swamped", iOS 7 has been successfully installed.
    I can't access the apps list in iTunes because it *****
    down.  Its pretty frustrating because many of my apps require me to manually transfer files into iTunes first to view
    them.  Not sure if the servers being swamped is an issue for me, unless they release a bug fix through another version of iTunes.
    Has anyone else had this problem?  My iPad is pretty useless unless I can access my app list in iTunes....

  • HT201210 I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    Hi there hhcd92!
    I have an article here for you that can help guide you through troubleshooting this situation:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

  • (iPad 3rd Gen. Wi-Fi) Lack of charging capability while plugged in and in use

    Hey all.
       For some reason, it has come to my attention that while my iPad (3rd Gen. Wi-Fi) is plugged in (to a standard outlet from the stock charger out of the box) and in use (no battery saving settings; ie. dimming the brighness), it will charge the battery any significant amount. For instance, when I am using it to watch YouTube videos over Wi-Fi while charging it as well, it was at 10% charge, but after...maybe an hour or so, it was at 11% charge. Curious, no?
       Is this a problem that should be of any concern? Or should I simply turn it off while charging it? Thanks for any help.
    ...Why isn't the New iPad listed in "products?" Meh...
    Cheers!

    http://www.macworld.com/article/1150356/ipadcharging.html

  • Is it safe to use the new ipad (3rd gen) while on charge

    I have the New Ipad (3rd Gen) 32gb wifi onlymodel,, and I use it while on charge i notice that it took way longer to charge while i use... will in not damage the devoce nor the batter if i use it while on charge?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I can't turn on my ipad 3rd gen after upgrading to ios 7.0.2

    my ipad 3rd gen run good using ios 6.XX then last sept i just found an update from my ipad and tries to update with good connection of internet. after upgrading it restarts and a few minutes of using with FB it reboot it self and i can't even turn-it-on, the following day i tried to turn it on but i experince a blue blinking screen for 20 to 30seconds then shut it self. i was scared so i haven't done anything to my ipad. i went to an authorized service provider "Power Mac" @ Festival Mall Alabang Muntinlupa City, Philippines to see if they can do anything about my ipad. but then, after 2-3days of wait thing, the service provider email me that the problem is on display hardware. they are not authorized to open a non-screw unit of an apple so they emailed me that is stated below. i try to set an apointmet call from apple singapore support/customer service but the day and time passed-by apple singapore doesn't call.. why do i have to pay for the said amount if i haven't done wrong to my unit? is it a customer's fault that i found and try its' recomendation to upgrade its' ios?
    PHYSICAL INSPECTION
    -‐rough edge of the unit
    -‐scratches on some area
    -‐with screen protector
    TROUBLESHOOTING / OBSERVATION
    checked iPad
    -no power when received the unit
    -charge it using known good usb cable and power adapter to D.C
    -encountered auto shutdown
    -DFU and proceed for restoration
    failed to restored encountered unknown error (9) blue screen also encountered while
    processing the restoration
    -flickering display also encountered
    -display issue
    REMARKS/RECOMMENDATIONS
    -‐display issue
    (hardware failure)
    -‐eligible for aep
    TOT. PARTS ₱18,460.00
    PLEASE HELP ME TO SOLVE THIS ISSUE... I CAN'T AFFORD TO PAY FOR THIS AMOUNT.

    Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

  • No Handoff on iPad 3rd Gen.

    Updated my iPad 3rd gen to 8.1 and trying to use the new  continuity feature,but I realized that in settings / general under spotlight search that Handoff and suggested apps aren't even their. I was almost certain that handoff worked with iPad 3? so now I can't even turn the feature on because theirs no button! Anyone else with this problem?

    I'm a little disappointed in IOS 8. Most of the new features I don't need or have turned off. On the positive side, I like request desktop site in Safari, speak screen and highlight content in accessibility, swipe to hide in the App Store, exposure in Camera and don't forget "Hey Siri." 

Maybe you are looking for

  • Can't pick correct timezone for Lightning from city dropdown list

    My country, Iceland, uses UTC all year round with no daylight savings. Europe/Reykjavík (or even better, Europe/Kópavogur !) is not an option and so with Casablanca (old Windows default too) taking on the timezone mantle the daylight savings mean my

  • Javaw.exe Stop Working on 10.2.0.3 in Vista

    Hi when i try to install 10g 10.2.0.3 Database in Windows Vista when it initialize Java JDK extension i face the error "Javaw.exe stopped working" (i run the setup as administrator) and then the installation program is closed!!! any one can help me ?

  • Integration between Time and ECM

    Hello all Could any of you describe or list what would be the integration impact issues to look for while implementing Enterprise Compensation Management with respect to Time Management. In my case, time is being administered by third party providers

  • Q: Error with TimestampAdd function

    Hi Gurus, In the rpd file referenced by my Siebel demo instance I have following error [NQError: 22025] Function TimestampAdd is called with an incompatible type Expression 1 is: " TIMESTAMPADD( SQL_TSI_DAY , CEILING("S_MKT_OLAP (MyConsumer Master)".

  • Failed Install of Cumlative Update 1 for SCCM 2012 R2

    When installing Cumulative Update 1 in my test lab  (with no internet access), the setup goes fine until I get to the part where the wizard says "Create Software Update Catalog" and then it fails with an error. When I re-run the setup the wizard skip