Ipad 3speaker is not working only headphones

My daughter poured water in the ipad... After it dried out, its workingbut the speaker not. It says head phones though nothing is inserted. Please help.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

Thinkpad T440 : Speakers not working only headphones

Hi,
I am facing a problem with a Thinkpad T440, there is no sound! it is looking like the speakers are not working, but when i plug in the headphones the sound come through the headphones.
I upgraded the drivers, tried to reinstall the OS but unfortunately nothing helps.
Thus, i disassembled the laptop and tried to figure out where the problem is? i find out that the speakers are working! I tried other speakers and the same thing happening > no sound
I tried to plug/unplug the headphones jack connector many times but without success
the headphone jack is apparently good at first sight!
Did anyone face the same issue that i am having?
Thanks in advance for help
Solved!
Go to Solution.

Thank you for your reply, I appreciate your help I tried this but it didn't help me
But I fixed my problem, I was increasing/decreasing the volume from the tool bar it wasn't working! I but I could see the waves when I put some music playing and no sound nothing was coming.
So I tried to deactivate the volume from F1. After that I increased the volume from the toolbar and hopefully it was working! so i figure out that the F1 and the sound card wasn't really syncing.
Thank you for your time and help

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.

Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057

TS2634 iPad sound is not working what should I do

iPad sound is not working what shud I do

Solved my problem straight away - cheers!
King_Penguin wrote:
Does it work in any apps e.g. Music and Videos but not others ? If Music and Videos still have sound then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My ipad sound is not working except when my head phone is connected

Plz help my ipad sound is not working but is when I put headphone.the sound comes when I activate Siri but otherwise no sound comes from ipad. the volume button is not workin but it used to. The slider thing to increase volume in the task bar is halfly gone means that dot is not there to increase volume

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

My Ipad 2 is not working. Is not tuening On. I dont' know what's happening. I'm trying to turn on and I have no ansewr. Screen is out, nothing come to the screen.

My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.

I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My Ipad keyboard is not working in email now that I have downloaded the OS6. Anyone know how to fix it?

My Ipad keyboard is not working in email now that I have downloaded the OS6. Anyone know how to fix it?

I have the same problem. Emailed apple--no help

HT4623 My iPad mini is not working right ?? On some apps

My iPad mini is not working right on some apps

You can always try to reset your device and see if it helps matters any:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

My ipad camera is not working why? Help

My ipad camera is not working, why? Please help!!

HI Judejesalva,
You can restore your ipad to your factory settings it could be that the camera is having an error with the camera software.

Ichat video not working only to one person

I've read most of the post on "i chat not working"; but has anyone had it to not work only to one individual. This is my case. I can video i chat with my son in FWB FL. with no problem. He has an Apple also. I can take my laptop to his location and video i chat with my sister-in-law in Jefferson Ga. But, I cannot video i chat with my sister-in-law from my location, Valrico, Fl. to her location in Jefferson Ga. I have had a 3 way phone conversation going with Apple, My internet provider and her internet provider and no one can solve the problem. Does anyone have any assistance they can provide. I'm not computer savy; so be patient and go slow and detail with me; thanks. Norm

More often than not this is about the way a modem or router or combo at either end use NAT.
NAT is Network Address Translation.
It is the way a device shares an Internet connection with several devices/computers.
However NAT means different things to different devices and not all devices therefore are doing what is called NAT the same way.
See here for further mind boggling
So what you may have is a device at either end that does not or will not play nicely with another device.
This can be particularly the case if the device has to use Port Forwarding or Port Triggering or is using the DMZ to open ports.
Using UPnP reduces the problem in many cases.
http://www.ralphjohns.co.uk/page15.html#CertainBuddy
Telling us what devices in the way of Modems and routers each end is using may help us pint to what can be changed.
Makes and models please with what they are doing to open the ports for iChat.
As Defcom has pointed out with certain connection it can be the Speed difference in the Internet connection both up and down that can be a factor.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:58 PM Monday; April 28, 2008

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Ipad 3speaker is not working only headphones

Similar Messages

Maybe you are looking for