Ipad 4 change video mirroring to videoout

Hi,
I have the lightning to digital adapter. Is it possible to switch between video mirroring and video out on the ipad 4?
I don't like to have my screen on while watchning hulu etc on TV.
Thanks

Hi there iburden2,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
-Griff W.

Similar Messages

HDMI iPad 2 Video Mirroring!

Did you see this application/use video of Video Mirroring on iPad 2 from YouTube from insanelygreatmac?!? VERY COOL! http://tinyurl.com/4sd4jtb

Good link. Thanks!!

IPad 2 Video Mirroring Does Not Fill HDTV Screen

I have the iPad 2 connected to the appropriate HDMI input of a 40" HDTV. It (sort of?) works as advertised; what is on the iPad display is also on the TV screen, a mirror image. However, the image only fills the middle 1/3 of the TV screen, with black borders above and below (with iPad oriented vertically). The image quality is good and in the correct scale. When the iPad is oriented horizontally, the image fills about half of the screen.
Does anyone know how to make the image fill the entire screen? I could find nothing in "Settings" nor anything on the TV. Thanks.

The screen proportions are different if I am not mistaken. The iPad has a 3:4 screen, not a 16:9. I would think the only way to do it would be to have the TV stretch it? But maybe with an HDMI connection, that is not possible.

I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
Thanks, Steve

This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation). http://support.apple.com/kb/TS4085

How to Enable Video Mirror in Original iPad, I don't want to hack on it

How to Enable Video Mirror in Original iPad, I don't want to hack on it

Dave Parker wrote:
Where can I learn more about how core OS services are controlled?
Try the developer forum. You'll find many like minded people there to assist you with questions. Most of the people in this forum are end-users.
http://developer.apple.com/devforums/

Video mirroring iPad 2 + Component AV Cable

Can I use a Component Av Cable to video mirroring my iPad 2?
I have the VGA adapter an it works great for that purpose but I'd like better quality output than just VGA.
Have you tested this combination?
Thanks

Confirmed, the component cable does not support mirroring.
Also I don't know where consumers get it in their heads that VGA is worse then component.
They're both analog connections.
They can both do 1080p (1920x1080 or 1920x1200 (16:10 aspect)), VGA can actually go higher then that.
Some devices will look washed out with VGA, this is NOT the VGA standards fault, but rather that devices implementation. The Xbox 360 for example had this issue originally but it was fixed via a software update.
VGA and Component are definitely on their way out in the consumer space, but they're still widely used in the business world with older data projectors (VGA being most prominent).
As for mirroring, the HDMI and VGA adapters are your best friends with the iPad 2.
I believe the component cable could handle the mirroring, its just something on Apple's end that's preventing it. Perhaps because if you use component on an older non-HDTV it can only do 480i and perhaps that causes issues with the iPad trying to output to that resolution. Just a thought.
- D

Video mirror not on iPad 1

I update to OS 4.3 last night and it all worked fine... Except that I was hoping that video mirroring would also work via de VGA adaptor, and it doesn't seem to be so....???

Personally I'm a little disappointed in Apple that after shelling out nearly £700 for an iPad less than 12 months ago, it is already obsolete. In the past they have been pretty good at rewarding early adopters with the latest features - and I was particularly looking forward to the video mirroring. Not impressed!!

IPad 2 hdmi mirroring doesn't work for videos

Ok, am I the only one who can't get the display mirroring to work on iPad 2? I plugged the hdmi adapter in to the iPad and got the Home screen to mirror, but when I played a video using the 'Videos' app the video displayed on my tv, but not on the iPad. iPad just showed a message 'your video is playing on your tv, (paraphrase). I would appreciate any help.

Ok folks. Here was my deal. After trying my AV adapter unsuccessfully on 3 different hdtv's, I decided to take my HDMI adapter back to the Apple Store today. They swapped it out, no problems. Now, I simply plug in the HDMI cable to the adapter then the adapter to the iPad and voila - mirroring works. Upon further investigation (asking the dude at the Apple Store), there was a bad batch of the AV-HDMI adapters.
So if ur having problems, consider swapping your adapter out.
Good luck!

Will ios 5 enable video mirroring of photos through the vga adaptor on ipad 1

Will ios 5 enable video mirroring of photos through the vga adaptor on ipad 1?

"the graphics hardware in the iPad 1 doesn't provide proper support for mirroring the screen."
Actually it does. I JB'd my iPad for the sole purpose of VGA mirroring and it works GREAT, but I'd rather not have to JB with ios 5. It obviously works, Apple sells a VGA adapter. What is the big problem with making this happen.
Thanks,
Mocheesehead

Quicktime corrupted for iPad 2 videos - no hand cursor controls

I have a 32-bit Dell XPS M1210 laptop and a 64-bit Dell XPS 435 desktop - both of which have had hard drives recently formatted and authentic Win 7 SP1 installed. Not much on either but IE8, Office 2003, HP Printers, Live Mesh, Avast, Google Earth and a few insignificant programs which are not common to both machines. Neither had ever had Quicktime installed until today since I just started rebuilding both. Wanted to watch the iPad 2 videos just posted. Downloaded current Quicktime, installation flawless.
Quicktime will not run properly on either machine. Same exact corruption problem on both despite 64 vs. 32 bit etc. The videos play, the black centered controls for Pause, volume etc. are there, however I cannot use them. Cursor blinks to a hand for a split second as I hover over controls, but then changes back to Arrow pointer and is not clickable anywhere on video. So, I can watch the video but can't pause, rewind etc. - no controls.
I have an old Dell XPS-410 Windows Prof. XP SP3 with Quicktime 7.69.80.9 which runs the videos perfectly, pauses controls etc.
Since the only thing in common with these two machines where Quicktime is corrupted is Win 7, I suspect problem may be centered there? I have tried uninstalling and reinstalling. If I go find OLD quicktime clips online which have the simple gray control bar at the bottom, they do work to pause etc. AFTER the clip finishes downloading.
Any help would be appreciated.
Ruth

The ipad is certainly no replacement for a computer/laptop.
It is used in conjunction with a laptop/computer. It is simply a big ipod/iphone.
I would not even consider the ipad for your needs.

Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
when i use i pad with apple tv for see my photo,youtube and movies all ok.

I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

IPad sending videos always as if external screen were 4:3

iPad admits videos that are decent to be watched on HDTV sets. iPhone requires videos to be smaller (iOS 4.xx).
However, iPad INSISTS on considering—using the Apple Component cable—that the output is going to a 4:3 set, and not a 16:9 or Widescreen, as is my case. Thus, in order to watch the video properly one must set the HTVC set to ZOOM, so that 16:9 movies do occupy 100% of the screen area.
This MUST be a bug, since the iPhone (3GS with iOS 4.xxx) does NOT behave like that. It considers the output screen to be WideScreen (as set accordingly) and shows the videos correctly. Of course, coming from the iPhone, they are lower quality.
My iPad is set to output to a Widescren HDTV. However, using the Component cable (3 Video RGB and 2 audio, left and right) it always transforms the image as if it were being sent to a 4:3 screen. This has got to be a bug! Please, whoever needs to pay attention to this, do it soon!
Thanks,

As far as I'm aware this is not a bug and the way Apple have designed the output of the iPad. Unless Apple decide to change the way the out put works you're stuck with the way it is.
Regards addressing Apple they do not respond to comments in these forums. These are user to user support forums. If you want to send your requests/comments to Apple I suggest you do it at the following link ...
http://www.apple.com/feedback

How to Video Mirror to my Iphone Projector

Hello
I have bought the new iPad recently.
I have a projector for my Iphone 4s which i recieved as a gift
http://www.brookstone.com/pocket-projector-for-iphone-4
I also recieved a dokc extender wire that I used to connect my iPad to my Iphone projector. It is 30 pin on both ends and supports video out.
So far I can't do true video mirroring. I can use video-out functions (videos, photos, youtube, select Video/out apps), but I am looking to reproduce the entire screen via my projector.
Do i need to turn something on true video monitoring or is there a very specfic cable i am missing? I was kind of hoping this would work. Its nice to have some limited video out functionality but the mirroring function was one of my selling points.
I hope someone can help.
Also I am relatively new to the apple world...so don't be afraid to elaborate.
Thank you.

I'm going to be honest, after I read your reply my first thought was to do the following
Buy the HDMI adapter, connect it to the ipad, then connect the hdmi wire, then find another adapter to go from the HDMI out back to a 30 pin to connect the phone (while creating a mesh of wires)
Silly? Absolutely
Infinitely cheaprer than the portable projectors out there? Absolutely

Video mirroring of Ipad2 using component cable only displays videos but not home screen

I watched videos online that show that I should be able to view my ipad2 home screen and apps while I'm video mirroring on my television but I can't see anything (only hear the audio) except when I play videos or watch youtube and use apps that have the TV Out function...Is there anyway to fix it?

I mean I can only view videos that I play on my TV from my Ipad2 but other than that I can't see my Ipad home screen on TV or any other apps that I open, though I can hear the audio. I'm using a component cable. I thought that I should be able to view my home screen etc with the cable?

IPad2 and VGA/Video Mirroring...

I'm a teacher with a VGA projector in my classroom. I really want to get an iPad2, but I've been holding out until I could justify the purchase by using it in class (Maps, Safari, Keynote, Pages, using the cameras to record video of the kid's projects, etc).
I've been reading a lot of vague information about video mirroring, I realize that the HDMI adaptor will mirror my brand spanking new iPad to an HDTV, but that's worthless to me in the classroom. I've read a lot of people who think that video mirroring will work with the VGA adaptor and an iPad2. Can anyone definitively tell me that iPad2 and iOS4.3 will support video mirroring with the VGA adaptor so that I can use it with my classroom's projector?
Please let the answer be yes, that would be awesome. If not... Can anyone think of a workable solution? HDMI adaptor --> HDMI Cable --> HDMI to VGA adaptor --> VGA cable?
Thanks.

Scroll down the page to Apple VGA Adapter. http://www.apple.com/ipad/accessories/
It says, "Share what’s on your iPad screen with an even larger audience by connecting your iPad to a TV, monitor, projector, or LCD display that uses a VGA connector." That's full mirroring.
This is a new description for the VGA Adapter, the old description is available if you click through to "buy now". The adapter appears to be the same, I think the difference will be iOS4 software that allows full mirroring.

Ipad 4 change video mirroring to videoout

Similar Messages

Maybe you are looking for