Ipad 4 has different speaker than ipad 2?

I had an ipad 2 before and the ipad 4 sound much much better ... So, it s diffrent speaker inside?

Yep it does. Sound seems better than both iPad 2 and 3.

Similar Messages

  • Computer has different name than Itunes for Ipod Touch

    I have an Ipod Touch 4th Generation 32gb. I have had no problems with it or with Itunes. My Mom came last Saturday to visit and she needed to charge her Ipod Touch so I hooked it to my computer where I always have a cord and charged it for about 45 minutes or so. I have no problem with my Ipod or with Itunes BUT when I go look at the device now on my computer,when it is connected to USB cord, it show "Marys Ipod" now instead of "Steves Ipod". In Itunes, it is still "Steves Ipod" and I can sync and all but I really want to get rid of "Marys Ipod" off my computer even though when I open it up, it is my ipod, just mislabed. I know because it has my pictures and her's is only 8gb. My Ipad2, is fine when I hook it up to the USB cord, It says "Steves Ipad" but when I hook my USB cord to my ipod touch, it still reads "Marys Ipod". Is this something I should be concerned about or is it not worth the hassle of trying to restore, etc? I have tried to change the name, but Windows won't allow. I do have Windows 7. I have also got the new update on Itunes and the new software(5.0) version.
    I am stumped. I have googled this and have searched for over 3 hours today on how to fix this. Ready to bang my head against the wall. I have did a reboot on Ipod, I have restarted the computer. I have not reinstalled anything including Itunes.
    Does anyone have any suggestions on what I can do? I would sure appreciate the help. Thanks in advance.

    shellymoe
    Currently Being Moderated  Re: Computer has different name than Itunes for Ipod Touch
    Jul 22, 2012 12:23 PM (in response to Toploader21120)
    I just found the answer to this after hours of searching online. Make sure your iPod is hooked up to your computer & turned on.
    Click on "Start" and in the search box type "regedit". This will display a program called "Registry Editor". Open it.
    Click on the "Edit" tab and select "Find...". Type "Mary" in the search box and click "Find Next". It will bring up a list of everything that has "Mary" in it. (You may have to click on "Find next" under the "Edit" tab in order to find the associated items that have something to do with both "iPod" and "Mary".) What you need to pay attention to is not the NAME, but the DATA column. For me, the wrong iPod name was listed in 2 places in the data column. The actual names of those 2 items were "FriendlyName" and "Label".
    Once you find the associated items that have to do with both the iPod and "Mary", right click on one of them. Select "Modify...". A box will open giving a "Value Name" box and a "Value Data" box. The "Value Data" box should say "Mary's iPod". All you have to do is change it to "Steve's iPod" and click "OK". Repeat the "Modify..." and renaming of the "Value Data" steps for every item that says something about "Mary's iPod".
    Close the Registry Editor. Open "my computer" and see that it changed the name of your iPod back to "Steve's iPod".
    Best Answer So far.....it really works...Thanks a million

  • AR Invoice has different currency than that of Sales Order.

    SR 3-3082378321, Release 11.0.2.
    Customer is reporting 3 Invoices (autoinvoiced at 3 different times) are having USD currecny_code where their (internal) sales order are in JPY. All other internal orders and invoices are fine. This problem is not reproducible at will, but it has happened 3 times in the past 2 months.
    Need help on debugging the root cause of it. Support has done following:
    1) reviewed Autoinvoice concurrent logfile and for the troubled invoice it shows:
    =====
    Customer_trx_id = 172207
    Trx_currency_code = USD
    trx_number = 6000042547
    trx currency = :USD:
    sys currency = :USD:
    ======
    Where for a good one, it has:
    =====
    Customer_trx_id = 17220x
    Trx_currency_code = JPY
    trx_number = 600004254x
    trx currency = :JPY:
    sys currency = :USD:
    ======
    This happened where system is selecting * from TAX_LINES_INVOICE_IMPORT_V. We understand data in TAX_LINES_INVOICE_IMPORT_V are fetched from ra_interface_lines_all table. This means data in ra_interface_lines_all table already has wrong currency_code.
    2) We collected concurrent program logfile of the Receivables Interface Program , and it doesn't reveal anything relates to currency.
    3) Customer stated there is no custom code for Receivables Interface program.
    4) Customer is on 11.0.2 and we ran shp11ord.sql (per note 117627.1), that doesn't reveal any currency information neither.
    5) We collected output from inv_info_110.sql for a good and bad invoices, and we see difference as follows:
    =====
    TRX_NUMBER TRX_ID TYPE STATUS TRX_DATE SOB CUST_ID RATE_TYPE RATE_DATE RATE
    6000041899 170695 NSO OP 2/18/2011 1 1026
    Good record has following:
    =====
    TRX_NUMBER TRX_ID TYPE STATUS TRX_DATE SOB CUST_ID RATE_TYPE RATE_DATE RATE
    6000038751 163874 NSO OP 9/25/2010 1 1026 User 9/25/2010 120
    The difference are the Rate_Type, Rate_Date, and Rate. The bad invoice has null value for these fields whereas the good one have all of them populated. Again, both orders (on Order Entry side) have currency of JPY.
    6) Customer also confirmed that no one has ever manually changed anything in ra_interface_lines_all table.
    Any idea what else we can do to sort out a root cause of this issue? Any pointers will be greatly appreciated.
    Thanks and best regards,
    Mark

    Thanks for your input. But my problem is that on a same day, they have most invoices are generated fine while only one invoice goes like this. Therefore I can't see this is relating to any user type, nor gl rates issue.
    I am actually looking for some inside on how to debug it. I can't trace the Autoinvoice on Production instance as the problem doesn't happen at will, and it has been only happened few times in the past couple months.
    thanks, mark.

  • DAQ Assistant Connection Diagram has different pinnouts than on the SCC-68

    When looking at the Connection Diagram on LabVIEW 8.2.1 (from DAQ Assistant) The diagram shows pins 34, 66, 31, and 63 ABOVE pins 68, 33, 65 & 30.  However, when looking at the physical layout on the SCC-68, these pins are transposed.  That is to say that pins 68, 33, 65 & 30 are ABOVE 34, 66, 31, and 63 respectively.
    Is this an error?  If not, what is the logic behind this?

    Hi RVallieu,
    I think the disprepancies in the connection diagram that you are seeing are related to the type of connection you want to do.  For instance, if you are doing differential measurements (good for rejecting Common Mode Noise Voltage), you would connect the positive lead to ai4 (pin 28) and the negative to ai12 (pin 61).  On the other hand, if you are doing Single-Ended Ground Referenced (RSE) using channel 4, you would connect the positive lead to ai4 (pin 28) and the negative to ai gnd (pin 64).  Whichever of these measurements that you choose, make sure that you configure the measurement type in MAX when you set up your task or in the VIs in LabVIEW under terminal configuration.  Here is a link to a document that describes the differences in these measurement types. Table 1 breaks the information down into Signal Type and Input Configuration.
    I opened up both the Device Pinouts in MAX for the 6221 and the manual for the SCC-68 (page 39) and compared the pins and they seem to correlate.  Since the SCC-68 works with multiple M and E series DAQ devices, they should be the same. 
    As far as your measurement value is concerned, Ben has a good point that you may not have configured the accessory correctly in MAX.  To do this, right click on your 6221 device and go to properties.  Then in the accessory tab, you can select the SCC-68.  This knowlegdebase describes the differences between SCB-68 and SCC-68 in case you were wondering. Hopefully this information will help!
    Regards,
    Vanessa L.
    Applications Engineer
    National Instruments

  • IPod has different dates than iCal

    I have a problem with how my 4th Gen iPod and Nano sync with iCal. Some - not all - of the appointments get moved around. I have a series of recurring appointments on Thursday in iCal that show up on Wednesday on both iPods. I have synce'ed the iPods several times but the problem still persists. Also, I noticed that "All Day" appointments in iCal show up as 3PM appointments on my iPod. What do I need to do to fix this? I can't trust my iPod as a calendar app if it gets the appointments wrong!

    I have a similar problem with my iPod/Calendar. There is a manual work around that worked for me. Seems to be a problem with iSync. Here is more details http://discussions.apple.com/thread.jspa?messageID=1747727&#1747727

  • My scanned document has different images than the original

    Scanning a document as PDF.  Some of the letters on the original do not appear on the scanned version

    What options do you use?

  • When Pages has to update it asks me for a different email than the one I use, What do I do?

    When Pages has to update it asks me for a different email than the one I use, What do I do?

    Update it from that Apple ID, or delete and redownload it.
    (111534)

  • SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

    I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
    Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
    Luckily my solution only has 10 packages.  I have verified and re-verified that everyone is set to dontsavesensitive.
    I have verified and re-verified that the solution has the protection level to dontsavesensitive.
    What on earth is going on here?  I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
    Can someone please help me out here?
    The Degenerate Dimension

    Hi MMiligan,
    Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
    So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
    If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
    protection level corresponds to the value of 0):
    DTS:ProtectionLevel="0"
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • "target document has a different depth than source document." help?

    as of yesterday i have been recieveing an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality. i have no idea how to fix this. please help.
    Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
    don't know if i accidentally messed with something i shouldn't have or what. any help is appreciated. thank you in advance.

    There's GOT to be something to fix. I've been getting that message all night -- when I say "yes" and then try to SAVE the document, it won't give me the option to "save for web."
    I started completely from scratch, and still got the error window, and it still wouldn't let me "save for web."
    So -- let's begin again -- what needs to be fixed?

  • I have an old iphone4 that I want to give to a friend that has a different carrier than I. I'm havaing difficulty understanding the instructions from Apple.  Why do I need to restore my phone if I have already updated my iphone 6

    I have an old iphone 4 that I want to give to a friend that has a different carrier than I.  Why do I want to restore my old phone to "unlock" it.  I erased all data when I updated my new phone.

    If you have arranged with your carrier to unlock you iPhone, and they have sent you an e-mail telling you that it has been unlocked and to follow instructions to unlock, then you will need to restore in order to complete the unlock.

  • When I try to login to the AppStore to update my apps om my iPhone 5s it has a different username than mine. How do I change it. It is correct when I go to settings/itunes

    When I try to login to the AppStore to update my apps om my iPhone 5s it has a different username than mine. How do I change it. It is correct when I go to settings/itunes

    Delete those applications and then download them from the desired Apple ID. This may require repurchasing paid applications.
    (101801)

  • HT5538 My boss has an IPhone from a different carrier than my iPhone. I want to set up iMessage so we can text each other for free. Is that possible? If so, what do I do to my phone and/or hers to set it up?

    My boss has an IPhone from a different carrier than my iPhone. I want to set up iMessage so we can text each other for free. Is that possible? If so, what do I do to my phone and/or hers to set it up?

    Just turn on iMessage... Settings > Messsages > iMessage > On
    Note that iMessage uses data (very small amount) so you need a cellular data (3G/4G) or wifi connection for iMessagae to work.  Also, in the Messages app, iMessages are blue and standard text messages are green.

  • My itune account has a different email than my apple id how do i fix it? someone has my old email and is receiving my itunes and some old emails

    My itune account has a different email than my apple id and someone has the old email address associated with my itunes so she receives lots of my information.  How do I fix this I already tried to change my itunes to my new email associated with my apple id and it states the address I entered is already associated with an apple id.

    You can change the primary email address on it to be another email address (if you don't have another account then you could create one via http://gmail.com or http://hotmail.com). You can't delete an account, you can only remove personal info from it (e.g. credit card details if you have on it) and stop using it - but any items (apps, music etc) that were downloaded on the account will remain tied to it, so only that account will be able to authorise that content on a new computer, potentially redownload its purchases, and download updates to its apps

  • Download from IR has different record set than on screen

    Apex IR ( 3.2) query uses 2 page items to filter. Results are correct on screen but when downloaded we get a different record set as if one of the 2 Page items has not been passed in.

    If you are having problems with the prints being a different size than what is on the screen, I believe there are two settings to try to adjust.  If you are using IE, you can check the Page button with the arrow down and look for "Text Size." Mine is set to "Medium."  Also you can go to the picture of the printer at the top and select the arrow down next to it and select Page Setup.  From there, you will see Enable Shrink-to-Fit which may be causing the problem or you can change the font type and size. Do you see these options?
    If not, what kind of computer do you have and what web browser are you using?
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • I have an itunes account.  However, I need to copy music onto a different iPod than my own.  How do I do that?  Do I need to create a separate iTunes account for that iPod?

    I have an itunes account.  However, I need to copy music onto a different iPod than my own.  How do I do that?  Do I need to create a separate iTunes account for that iPod?

    An account means an iTunes Store account which is an online service.  Do you mean that, or do you mean a library on a computer?
    iOS devices can only be synced to one iTunes library at a time.  You can sync that iPod to your account but it will wipe everything currently on it.
    iTunes: Syncing media content to iOS devices and iPod - http://support.apple.com/en-us/HT201253 - detailed example: https://discussions.apple.com/message/18860187#18860187
    If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.) When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad. http://support.apple.com/kb/PH12113  and http://support.apple.com/kb/HT1202
    I could post another 2 pages of stuff trying to cover every possible scenario.  It would help if you let us know exactly what you want to do.  Are you trying to sync just a few songs (like giving them to a friend which is something iTunes is deliberately set up not to do)?

Maybe you are looking for