IPad 4 keyboard case with Lightning port? (NOT micro-USB)

Hello,
I have an iPad 4th gen and looking to buy a keyboard case for it.
All the cases I've seen so far use micro-USB for charging. I'm trying to actively reduce the number of cables on my desk so I'm looking for a case that has a Lightning port for charging, so that the same USB/Lightning cable I use to charge my iPad can also charge the case.
Any suggestions?
Thanks!

Considering the cases available are generally produced by third parties its very unlikely you would find one that charges with an Apple charging cord. Usually they use some type of micro USB

Similar Messages

  • IDevices with Lightning Port - Silent Mode after Charging

    Hi,
    I have been tracking and troubleshooting an issue with iOS devices - iPhone 5 (two units) and iPad 4 since its launch and iOS 6.0 until now at latest iOS 6.0.1/6.0.2 (dependent on device) without much success to narrow the cause.
    It appears that the various iOS devices with lightning port that I (and my partner) have exhibits the issue of it going into "Silent Mode" after charging. And once it gets into this "Silent Mode", the toggling the silent switch on and off will not have any effect, and so does any of the sound settings. The only way to resolve this permanent "Silent Mode" is to restart the iOS device.
    All the lightning cables used are Apple genuine ones purchased direct from Apple Online Store (during the initial weeks of iPhone 5 launch, total purchased 3 on top of those that came with iPhone 5 and iPad 4). The charging adapter/device varies though, from Apple 10W iPad charging adapter, Apple 12W iPad charging adapter (that cause with iPad 4), to Dell Latitude E6400 laptop and Apple Mac Mini (2011). This issue has been random irregardless of which charging adapter/device used, but has been more prone to occur when charging from the Dell Latitude E6400 laptop (the most number of times it has happened on both iPhone 5 and iPad 4).
    Is anyone experiencing similar issue? Or have any suggestions to reproduce the issue?

    Haven't experienced this on either of 2 iPhone 5's or an iPad Mini.
    Try restoring one of the devices. See if that helps. Since you have multiple devices to test on, restore a different one as a "new" device.
    If the one restored as 'new' does not have problems, and the other does, then it can probably be traced to an app that they have in common or corruption in the backup used to restore them.

  • After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

    After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

    Hey, I've got the same problem. Did you find any help or solution by now?

  • My ipad is locked up with the screen showing the usb port connecting to itunes.  I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours.  then the screen was locked up.

    My ipad is locked up with the screen showing  a picture of the usb port with an arrow to itunes.

    Then connect your iPad to your computer and use iTunes to restore. 

  • What. Is the best and lightest iPad 2 keyboard/case?

    What is the best and lightest iPad 2 keyboard and case?

    Richard-
    The best and easiest is to use the iPad's built-in AirPrint system with an AirPrint-capable printer.  <iOS: AirPrint 101>
    If you do not have an AirPrint-capable printer, all printing Apps are a compromise.  I have an HP non-AirPrint printer connected to my WiFi router.  The free HP App, ePrint Home & Biz works OK with photos.
    Print n Share and PrintCentral each have their own browser, mail, text and photo programs that work well with the printer, but they can only be accessed from within other programs that have the "Open In" option.  (So far, I think GoodReader is the only App I have with that option.)
    You can run a program like Printopia or FingerPrint on your computer that will share its printer as AirPrint over WiFi.  They both are reported to work well.  However your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • TS4585 My IPad mini has frozen with the message:  Not Enough Storage.  This iPad cannot be backed up because there is ot enough iCloud storage available.  You can manage uour storage in settings."  But the screen is locked so I can't hit "close" or "setti

    My iPad Mini has frozen with a a message that I do not have enough ICloud Storage space.  I have freed up nearly 5 GB of space and it is stll frozen.

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • HT4759 my ipad is locked up with a picture of a usb cable plugging into an Itunes cabl

    my ipad locked up with an image of a usb cable plug pointing towards the iTunes logo

    You need  to place the iPad in recovery mode > iTunes: Restoring iOS software

  • IOS 7, iPad 4: keyboard problems with Shift key

    Since I have upgraded my iPad 4 to iOS 7 a few days ago the keyboard drives me mad: I did not experience the overall slowness of the keyboard as reported by so many others. Anyway, I reset my settings just to be safe. But the reset had absolutely no influence on my real problem which is as follows:
    Whenever and wherever (each app) I type, it is just a matter of luck whether or not the keyboard will recognise me typing the Shift key in order to get capital letters - and there are many caps in German words because each noun must be in caps! In 70% of all cases iOS will just write my capital letters as lower-case ones because it just does not recognise me hitting the Shift key, especially when typing quickly. Under iOS 6 this problem did not exist. I am losing so much time fixing missing capitalisation in all my texts (I use iPad for business) and/or typing extra slow and hitting the virtual Shift key on the screen extra hard that there is absolutely no flow in typing. Everything is just slow, whacky and it drives me nuts! How can it be that the latest iPad 4 with so much CPU power cannot handle a simple thing as typing caps? I am also experiencing problem when using the wipe-up gesture to get umlauts on vowels. It is not as bad as with Shift, but also noticeable.
    Is there any solution to this problem? It is a major impediment and I am even considering an iOS downgrade because it is basically killing my ability to work efficiently with my iPad. Otherwise I am kinda okay with iOS 7, but this is a real show stopper. I wonder why I found nobody else on the whole web mentioning this problem.

    Thank you Habitoti for describing the necessary change to the way that we need to type on ios devices to avoid the capital letter problem.
    Holding the shift key fractionally longer solves the problem. But why oh why would Apple require users to fundamentally change the way they touch type by introducing a different keyboarding protocol like this? It is most unlike Apple to have us now have to consciously think about how to touch type all over again.
    Intuitive operating systems are what make Apple so great. This keyboard problem is definitely not intuitive and it is driving me crazy.
    Apple, you need to change the time weighting on the shift key in iOs 7.04.
    Please, pretty please!

  • Apple wireless keyboard OK with iPhone, but not iPad2

    My wireless keyboard types correct symbols on my iphone 5, but not on my iPad2.  It does type the correct letters, but most of the symbols (both when in "lower case" and caps lock) are different from what's on the keyboard.  How can I adjust my iPad2 so the keyboard types the correct symbols. Virtually all the **** numbers plus symbol keys type symbols different from what's on the keys, though most of the symbols are covered by some other keys.  It's just not feasible to go searching by typing 10 or 20 keys to find one symbol, and then not to know whether to use the Shift, Ctrol, Option or Command or maybe even fn and then which key to guess will get the symbol I need.
    Please advise.
    Thanks,
    dan

    Thanks for replying, very kind. I'm unable to log into my account.. As a guest, I'm not able to get access to any of my system preferences.
    I think my imac has accidentally paired with my new apple tv remote.. I bought apple tv yesterday, was very excited but now wish I hadn't connected it. I'm unable to work on my imac which is very problematic on a workday.
    How can I unpair the apple tv remote from my imac if I cannot get access to my system preferences to unpair any devices?

  • Ipad will only charge with one charger, not recognize by pc or itunes

    I have an Ipad 1. I bought a third party car charger to charge the ipad. I charged it with this charger one time. The next time I tried to charge the ipad with the original 10W wall outlet charger, it would not charge. I bought another apple ipad charger, thinking my original charger had quit working, it still would not charge. I plugged it back into the car charger and discovered that it will only charge on that particular charger. Now itunes nor my windows pc will recognize the ipad. I uninstalled itunes and installed the newest version. I also hard reset the ipad and now I have a worthless ipad that will not connect to itunes. Any suggestions?

    It's possible that charger damaged some part of the connection on the iPad. There's little metal contacts on that small silicon chip sticking out of the port and if something happens to one of those little contacts it can effect how it works.
    You can try taking it into an apple store and have them look at it. If you'd only used 'official' stuff there'd probably be no question but once they know that the damage, potential damage, was caused by a third party device, then it may be up to the discretion of the manager what they do with it. Whether they replace it under warranty or decide that the warranty is void (I honestly don't know how strict they can be with the use of third party devices and how they may/may not work)

  • Can I use my iPad 3 keyboard care with iPad Air?

    I am considering upgrading from iPad 3 to the new iPad Air.  Will my Logitech Ultrathin Keyboard Cover work with the new iPad Air?

    Will the BT keyboard functions work? Yes, they should. Will the keyboard attach correctly to the iPad? We'll probably have wait until it's released and try it out.

  • IPad WiFi works only with WPA/TKIP, not WPA2/AES

    My iPad (like so many others) stopped connecting to my Linksys WRT54G router (which like everyone else's connects fine with every other device, including non-iOS 4 iPhones). The whole reset/restart/restore dance with the iPad/router/cable modem was performed to no avail. By sheer desperation, security protocols were changed, and that's what finally worked.
    The protocol to the rescue was WPA/TKIP, curiously enough. (When security is completely disabled ("Open"), the iPad also connects, perhaps expectedly.) The culprit is WPA2/AES (even AES+TKIP). Any iteration of WPA2/AES ends up blocking the iPad from getting the appropriate IP address via DHCP. Once I changed to WPA/TKIP, everything's been rock-solid and fast.
    (The only times WPA2/AES worked was when the iPad was first used for a couple days, and a couple days after switching back to WPA2/AES when it started working with WPA/TKIP. Since then, switching back to WPA2/AES no longer works, even temporarily.)
    Any idea why initially WPA2/AES worked, and then suddenly stopped?

    Ralph Landry1 wrote:
    That is a very interesting question ... [involving] the combination of the router and the iPad and their respective implementations of the AES encryption algorithm. The AES algorithm is considerably more complex than TKIP. Why some have problems and not others has to be related to the router and its implementation and the Apple implementation.... t works fine for me connecting with [both] a Verizon FiOS (Actiontec) router [a]nd ... an AirPort Extreme. But there have been a number of posts recently about problems with Linksys and Belkin connectivity.
    Tell me about it. I'd been pulling my hair out prior to "discovering (by accident," as George Costanza would say) that WPA/TKIP fixed the problem, and seems to be working fine and fast. Now I'm just academically frustrated (better than actually frustrated) wondering why WPA2/AES is so problematic +with this particular trifecta+ (my iPad, my Linksys router, and WPA2/AES).
    Bottom line is there is probably not an easy solution ... and since you do have a strong security protocol that works, keep using it. Very strange that there would be a change in connectivity after a few months, though. Old engineering philosophy, if it ain't broke, don't fix it. If you have something that works, stick with it for now.
    Actually, WPA2/AES worked on two (short but notable) occasions:
    a) for two days when I first unpacked the iPad, and
    b) for two days when I switched back to WPA2/AES upon discovering WPA/TKIP fixed the issue.
    So it wasn't two months, which makes more sense. I agree with you that I'm not touching this arrangement for now. What I did have to do was change over the other devices (PCs, Wii's, TiVo's) that didn't automatically adjust over to WPA/TKIP. (To its credit, the iPhone did that on the fly.) Going through each device hurt a little, knowing I was using a less-than-optimal protocol for just one cranky device at expense of every other one--but of course I'd rather everything play nice than be necessarily cutting edge. (It's not like I'm the Pentagon or anything here.)
    But also give feedback to Apple:
    http://www.apple.com/feedback/ipad.html
    Done and done. And thanks for a great and reassuring explanation.
    Message was edited by: TashTish

  • Does your ipad mini keyboard block your view in notes?

    Notes in iPad mini the keyboard gets in the way so I can't see what I'm typing. Anyone else have this problem?

    Thanks Walnutree, this fixed an annoyance I had for months and I had no clue what to do about it.
    Fact of the matter remains, I say to iOS developers hoping they read this post, that this is a dorky and unnecessary bug. I think the bug is: 'locked dock keyboard setting is default at iOS8 upgrade' so now you guys don't dare to auto-fix this anymore because you can't tell which people set this deiberately and which people got an unwanted default setting. But you can change the keyboard icon because there is no sign anywhere that my keyboard is in lock mode. Details matter, people.
    This leaves the other burning question mark: why on earth would anyone not want to see if the typing went ok?

  • Is there going to be a FM car transmitter which works with lightning port for iPhone5?

    I don't want to use my old one with an adaptor really because my old FM transmitter was a wireless one and was poor quality.

    I've looked around and there currently isn't one planned, but I'd keep an eye on Belkin and Griffin Technology, they are the two companies most likely to make one.

  • MSI GT70 20D USB 3.0 ports not recognising USB 3 devices.

    Yesterday, I received my MSI GT70 Haswell/GTX780 laptop.
    I have had a shedload of headaches with it so far, not least of all due these laptops coming with Windows 8 on. Most of the issues that I had, have been resolved now that i have gotten rid of Windows 8 and put Windows 7 back on, I guess the remaining blanks will have to be filled in when Windows 7 drivers become available. One problem that persists into my laptops life with Windows 7 however, is that the USB 3.0 ports do not work, at least not with USB 3 devices.
    Does anyone else with these laptops have this problem and does anyone have any ideas on how to get it fixed?

    Quote from: Prohor on 25-August-13, 22:18:32
    Finally I resolve this problem. After huge search on the net I found that the older firmware versions of many USB 3 storage devices have compatibility issues with the Haswell chipset USB 3 controlers. I updated the firmwares of my W.D. external drives and the laptop recognized immediately the drives and used them with USB 3 speeds. After one month with this problem I am very dissapointed with MSI support. It isn't possible that I am only one customer with this problem. This informations and solution It should be suggested from the support MSI team on our first contact. The fact that they didn't shows that the MSI support team don't knowing the compatibility issues of their machines hardware. I hope that in the next time will do their job.
    To start off, you're a bit mis-informed.
    This is a users to users forum. We are not paid by MSI. We do this in our free time because we enjoy it.
    Second, did you actually contact MSI support? *WE* here on the forums are not MSI support. I re-read the thread and you have not mentioned anywhere in it that you contacted the actual MSI support team.
    On the rest, thanks for atleast clarifying how you resolved the problem. I did not know this, and I'll do my best to inform other users that have this problem about it as well.

Maybe you are looking for

  • Is there a way to clip files in DVD Studio Pro?

    Hi, I have a file that is 4.9gbs, 200 mbs over the max size for a dvd. I'm wondering if it's possible to clip/delete parts of a track (like in FCP) in dvd studio pro because I don't have time (took 9 hours to export). Any help is appreciated. Thank y

  • Iq772 mini display port adapter

    I have finally got my iq772 up and running after problems with go7600 crashing to a bsod, not finding correct graphics, only standard vga.   I'm now looking for a HP mini vga to vga adapter. I have found one that looks correct on HP store ( SIIG Mini

  • How to relove this problem in forms 10g(10.1.2.0.2)

    m trying to use run_report_object so many time but error is coming out like "Cannot find report :invalid ID" please help me what should i do Rgds Manoj

  • Wireless Backup w/ time capsule

    I was thinking about getting time capsule. I do have a question about wireless backup though. I travel a lot and I wondered if I were to leave my time capsule at my house and travel out of town will I still be able to backup things on the time capsul

  • Product and Standard SCs (SAP_BUILD, SAP_TECH, SAP_ENGINE)

    Hello! I have got a little question about the NWDI of SAP. I have created a new Product in the SLD. After that, I always have to add 3 Software-Components to my Product (SAP_BUILD, SAP_TECH and SAP_J2EE_ENGINE). Is there a way, to add those 3 Standar