Ipad 4 stuck in recovery.Help Please

So I`ve got an iPad 4 decided to update to ios 7 and i got to recovery mode,now i cant even use my ipad cuz im stuck there and it says couldnt recover ipad error 3004 help me please im so mad

Please search the internet for steps to get ipad out of recovery mode and follow them accordingly,will solve your problem
Thank you

Similar Messages

  • Stuck in Recovery - Help please

    Just recieved ipod nano today.. connected to itunes (was fine), updated software (was fine). Now i connect my ipod to my PC and itunes displays
    "iTunes has detected an iPod in recovery mode. You must Restore this iPod before it can be used with itunes."
    Clicked ok then clicked restore.
    After restoring ipod message is displayed.
    "iPod has been restored to its factory settings. Please leave it connected and it will appear in itunes source bar."
    - Ipod is Left connected -
    itunes then displays the original message -
    "iTunes has detected an iPod in recovery mode. You must Restore this iPod before it can be used with itunes."
    It keeps going round in circles.
    Any ideas????

    Try assigning your iPod a different drive letter. This recurrent message about "iTunes has deteced an iPod..." could possibly be caused by Windows drive letter confusion.
    Follow these instructions:
    Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
    Then, put your iPod into Disk Mode, then follow these steps:
    1 - Don’t plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, connect your iPod to the computer.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod drive letter / Changing drive letter
    I hope that helps you.
    -Kylene

  • Hi so my ipad is stuck in recovery mode.  Once I connected to itunes to install the ios 8 software it says that its eligible for the request build and I tried the sudo nano command and that didn't work either. Please help thanks!

    Ipad mini stuck in recovery mode.
    My itunes is up-to-date.
    Sudo nano command is not working.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • My iPad is stuck in recovery mode.  I already downloaded Snow Leopard and am making no progress.  Help!

    My iPad is stuck in recovery mode.  It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working.  What can I try next?

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • IPad 1, stuck in recovery mode, error 1601, wont turn on or restore/update

    Its a brand new iPad,
    its stuck in recovery mode, it says restore and update but it wont restore/ update because i get error 1601, How do i fix this problem ??? it wont even turn on please help?

    If it were in recovery mode, you would see this
    If its just a blank black screen, follow these steps
    Will not turn on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
    Check    if the Liquid Contact Indicator (LCI) in the headset jack or dock connector is activated or there are signs of corrosion or debris. Learn more about LCIs.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    If something other than the Home screen or Low Battery screen appears on the display, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, try resetting it while connected to the iPhone USB power adapter. To reset, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or the battery symbol appears.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Restore the iPhone. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • IPad 3 stuck in Recovery mode while trying to upgrade

    I attempted to upgrade my iPad 3 and received the error message that there was not enough memory. Linked it via USB to iTunes on PC laptop (updated iTunes to latest version). Error message said unable to upgrade the iPad, my only option is to Restore. However, that will erase all my data and settings which I have not backed up. Now I'm stuck. Either restore and lose all or leave iPad as is ... only problem with the latter is that the iPad is stuck in Recovery mode and everything I have tried does not release it. Would appreciate help with this as I now have a non-functioning iPad! Thank you.

    Hello ardsdon,
    Thank you for using Apple Support Communities. 
    I see your iPad is stuck in recovery mode. The following article addresses putting your phone into recovery mode and restoring it. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    Jeff D. 

  • Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Hi,
    Is there an iPhone involved ?
    If not, what happens  if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
    What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
    Is the Apple ID linked to an iCloud account ?
    In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
    9:14 pm      Friday; April 11, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

          Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

    I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
    My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

  • My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    Are you testing in the same room as the TC?
    Power cycle the TC.. does it show up now?
    Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
    Is the TC new? If old how old?
    If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
    Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
    Use WPA2 Personal security only.
    Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
    Tell us how that goes.

  • TS3274 iPad 2 stuck in recovery mode

    iPad is stuck in recovery mode. I don't want to restore and lose data, is there a way to do this?

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • Bought new ipad a day ago did a software update stuck in recovery mode please help!!!

    Hello, a day ago i purchased and ipad 2. the next day i got a message that poped up and said software update. So i clicked on update software and then it went into recovery mode. So then i went too my computer that has the newest update of itunes and is fully updated. Then i connected the ipad too the itunes and then i clicked on restore and update. I waited about 5 hours for the updated too finish then when it finnaly did itunes started too extract the update too the ipad. But then it stopped and it would not work any more. It was stuck in recovery mode i tryed every thing too get it out i pressed the home and start button and still nothing happened. please help me

    Hi there mmimadi,
    It may seem a bit repetitive, but I would recommend taking a look at the troubleshooting steps found in the article below. If the issues persist, there a a few other things we can try.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

Maybe you are looking for

  • Upgrading from 3gs to Iphone4

    I have recently signed a 3 year contract with FIDO for the iphone 3gs (like AT@T etc), now that the Iphone4 is out, I am craving to get it, but I don't wanna have to buy out of the contract. Does anyone know if there is anyway I can Upgrade my phone

  • USb cable consuming too much power !

    Hi, Dear Sir, I had an issue regarding my Macbook Pro. When i connect my iPhone 5 lightning cable in usb port then it give a massage that" USB devices disabled, usb cable consuming too much power device disbaled. Please give me our best solution. Tha

  • PDA Keyboard Mapping Problem

    Hi All,          I am involved in a project in which my coding revolves around MI AWT client application part. I had no problem in extraction of data from MI middle ware, thanks to MI sync APIs and this forum.          My problem is more of Java cent

  • How to archive data from bsak - vendor cleared items

    We are using ECC6 and I want to archive vendor transaction data from bsak table using the transactin SARA. What archiving object should I choose? After doing the archiving how can I retreive the data? Best regards, Odelia.

  • Adobe Photoshop Quits On Launch

    Apologies if this is in the wrong place, I did look but no other board seemed appropriate. Photoshop loads all the way up to the splash screen disappearing then just quits. I'm running Leopard on a Mackbook Pro, all up to date. My version of Photosho