IPad 4 Volume drops really low a few seconds, then back to normal.

Hi All,
I am having an issue with the Volume on my iPad 4.  I had one replaced 3 days before the warranty, but The replacement started doing the same thing.  I realized it had to be an app causing it.  I had been playing the RoboCop game for a bit and had just beaten it, so I deleted it.  The trouble never happened again.
Now, it's doing it again and I'm thinking it must be another app causing it, but I can't seem to find it...and, obviously, it's out of warranty.
Here's what happens:
When I play anything with sound, after about 20 seconds or so, the Volume drops down so low it's almost not even able to be heard.  It does this for about 3 to 5 seconds and then it comes right back to normal.  It won't do it again unless I start a different video, song, app, etc...
I backed up everything to my MacBook Pro, Restored it to New/Default Settings, then Restored from Backup...it did not help.  I also upgraded to the newest Version of iOS 7 when I did that...(Version 7.1.2).
If anyone knows what the problem is or what might fix it, PLEASE Help.  It's driving me crazy!
Thank you so much,
Scott

You might want to try restoring as new - without the backup - and see if that fixes it. If it doesn't fix it, you can still restore the backup and you won't lose anything but a little bit of time that you spend restoring again.
Backup again, then restore as new, use the iPad and switch from song to song or from one app with sound to another....whatever you need to do to cause the sound issue again. If the sound issue doesn't come back, then you might assume it's something in the backup that was causing the problem. Start over and rebuild the iPad from scratch.
If the problem does not go away when you restore as new, you can always restore the backup to the iPad again and then take it to an Apple Store and ask them to take a look at it.

Similar Messages

  • My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

    The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
    Thank you, Neil.

    Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

  • Blank screen for few seconds then back for a few seconds (loopping)

    I just restarted from a situation where my screen went blank, after few seconds came back, but I cant do anything, then blank again (looping continuously) how can I know whats wrong? This is the 1st time it happens but I am quite worried of hardware failures by now. Its a self built PC.
    - Intel Core i5 (3570 I think)
    - 2x4GB DDR3 1333 Kingston
    - ATI HD5670 (not sure abt last 3 numbers)
    - Crucial M4 128GB
    - Hitachi 1TB
    Is there any logs to help identify a probable cause? Or any ideas, maybe its a common minor problem that random pops up in any PC?
    It sounds like a graphics driver reset or something?
    Last edited by jiewmeng (2013-07-18 14:46:29)

    If you using the proprietary ATI drivers can you make sure you've got KMS off (nomodeset on your kernel line) conversely if you're on the open drivers make sure this _isn't_ on there.
    https://wiki.archlinux.org/index.php/AM … de_setting

  • My volume is really low even when turned all the way up.  Is there a fix?

    I got this ipod for fathers day and just started messing with it this weekend.  The volume is really low.  I downloaded my music and have tried several songs plusdifferent earphones and the radio on the ipod.  I can hear it but it is to low to run with.  I think ill here myself panting over it.  Is there a fix or does apple support the problem?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • I'm conecting my Ipad to the computer to charge and it shows the charging sing for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?

    I'm conecting my Ipad to the computer to charge and it shows the charging sign for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

    I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

    Your warranty includes 90 days of phone support. Contact Apple.

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

    When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
    Its the same on most of the preset amps.
    Please help, the apogee cost me £80!

    Is it stopping recording after 8 seconds? Are you using Garage Band?
    If both of these are correct:
    This is actually a feature (i'm not sure why it defaults to this).  Instructions for the iPhone version are below:
    With the amp section open, touch the sproket on the upper right.
    You should be in a "settings" type area with three tabs.  Touch "Sections"
    Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Macbook screen goes black for a few seconds then reappears fine

    The last two days my macbook screen has gone black for a few seconds then reappeared a few seconds later. Its as if it goes to sleep for a few seconds. The two times it has done this it has been charging. I have checked for hotspots but i have not activated any. I only bought the macbook air two months ago and have been really careful with it so i am confused.
    any help? Please?
    Thanks people.

    Hello @bobbiy58,
    I understand that your HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop PC is going black for few seconds and coming back. I need to ask has this just started? Like since you connected your X-box? If so have you tried disconnecting the X-box to see if it stops?
    Please re-post and let me know. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • SB Live! 24Bit Works for a few seconds then st

    my SB li've works for a few seconds then sto
    ps.
    if you mute it, then un mute it, it works for a few seconds and stops again. when it stops working it makes some low clicking sounds with no audio output, has anyone seen this before or have an suggestions, its not the speakers its definitly the soundcard.

    more info:
    i just purchased and installed the card
    i have tried everything in the faqs
    if u play music it goes in and outMessage Edited by noobguy on 07-0-2005 09:42 AM

  • Why does my ipod classic (80gb) connect for a few seconds then disconnect?

    I have a ipod classic 80gb, granted its old, but it has a big memory so I can store my whole collection. Anyway, when I connect it to my PC (with windows 8.1) it will connect for a few seconds then disconnect. It will sometimes start to sync, but then disconnect after a few seconds. My computer is pretty new, Acer Aspire V5. I have tried reinstalling itunes, a new cable to connect it, different usb ports(2) and with and without the pc plugged into the mains, which is when it starts to sync for a brief second. Has anyone else had the same problem??

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • TS1702 Whenever I try to redownload an app from the cloud, it only loads for a few seconds then stops. What do I do?

    The app was having problems, so I deleted it and tried to redownload it from the cloud. It only loads for a few seconds, then quits. I don't really know what to do, help please!

    Never mind!!

Maybe you are looking for

  • Need help on implementing the BADI ME_GUI_PO_CUST

    Hi All, As per my requirement I need to do Enhancement for Unloading point field on PO.This filed will get all the department numbers applicable for the site on the line item. For this I need to Implement the BADI BADI ME_GUI_PO_CUST. The Method whic

  • ANE in Flex Mobile Projects, Overlaying AIR 4.7 SDK and Flex 4.6 Doesn't Work!

    There are some ANE's I want to use but they require me changing my namespace from 3.1 to 3.5+ (I guess now 3.7) Apparently, in order to do this I need to overlay Flex 4.6 and the latest Air (4.7). However, when I do this I get tons of errors. At firs

  • Can't Get The EAX Consol To Work/App

    I have just managed to get the latest drivers installed for the SB Audiology 2 and I am now trying to install the EAX Consol tools. I.E. The Speaker Settings, Mixer, etc. However the files I have downloaded from the site give me the following error:

  • Unable to buy

    Hello, I'm trying to buy a PSE10 upgrade since last Saturday.  OK, it was weekend. The Adobe store says originally "processing..."   then Pending...  now is showing no purchase history. See attached print screens.  How can we solve that situation? Th

  • Javax.jms.JMSException:TopicConnection ( can't invoke method setClientID )

    07/02/19 11:21:47 javax.jms.JMSException: TopicConnection[Oc4jJMS.Connection.dsc p18056.3b2816fc:110d886e29f:-8000.35]: cannot invoke method "setClientID" within the J2EE container. 07/02/19 11:21:47 at com.evermind.server.jms.JMSUtils.make(JMSUtils.