Ipad 4 while on charger flickers and goes on and off

Just bought a refurbished Ipad 4 ( Netherlands ) and I did the update to IOS 8.
Installed my apps and all and I put it on the charger ( original ).
Opened an app, and screen goes on and off. Even went out after I tried again.
Have tried to reset the tablet and started again with my account, but problem remains.
What seems to be the problem? Can anybody help me with this issue?
Thanks,
Ik heb net een Ipad 4 refurbished gekocht. Heb de update naar ios 8 gedaan.
Mijn apps erop gezet en toen moest hij aan de lader ( originele ) .
Denk ga tijdens het opladen mijn apps openen en bekijken, maar op dat moment terwijl ik in een app zit gaat mijn scherm aan en uit. Dus app afgesloten en weer opnieuw geprobeerd. Gaat weer knipperen en start zichzelf weer op.
Heb de ipad weer gereset in de hoop dat hij het dan weer gaat doen, maar het probleem blijf.
Wat kan het probleem zijn? Iemand een oplossing?
Bedankt

Stop using it
Take it to Apple and ask them to check it out

Similar Messages

  • Are there any problems using the Ipad while is is plugged into the wall and charging?

    Are there any contraindications using the Ipad while it is plugged into the wall and charging???

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • HT4060 Can i use my ipad while being charged or it is wrong?! I mean that does if affect the battery?!

    Can i use my ipad while being charged or it is wrong?! I mean that does if affect the battery?!

    Whenever you want. Will not affect the battery's life.
    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University

  • My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

    My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • I am being charged for itune purchases I did not make. Charges are appearing on my bank statement. I have been going around in circles trying to dispute the charges but am going round and round in circles with no success.  Suggestions please.

    I am being charged for itune purchases I did not make. Charges are appearing on my bank statement. I have been going around in circles trying to dispute the charges but am going round and round in circles with no success.  Suggestions please.

    I cannot get any response for HELP!!

  • My iPad is not charging. Tried different cord and plug. Any suggestions?

    My iPad is not charging. Tried different cord and plug. Any suggestions?

    Hi Lydia1947,
    If you are having issues charging your iPad, you may find the following article helpful:
    iPad: Charging the battery
    http://support.apple.com/kb/ht4060
    Regards,
    - Brenden

  • HT4061 my phone wont turn on so i cant getbthe seriel number, even when i plug it in the computer the apple sign pops up and goes in and out..

    my phone wont turn on anymore, at first it was just shutting down for no reason but still coming on but today the phone wont come back on,now the apple sign is on screen and going in and out. what should i do to fix this problem

    If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
    If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge.  If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

  • When I plug my iPod into the charger and it's done charging the battery goes on and off and it wakes me up at night please tell me how to fix this!

    When my iPod is done charging the battery noise
    Goes on and off and it's very annoying and I can't figure out
    What it is and it goes off when I sleep walking me up please
    Help me!!

    After a short time the iPod's screen should automatically go off? Does that happen?
    Cover the iPod with something so the screen light does not bother yuu

  • IPhone 5/Complaints the volume of my voice on calls is garbled and goes up and down.

    I have an iPhone 5 and I've received complaints while on calls that my voice is garbled and the volume of my voice goes up and down as though I've pulled the phone away from my mouth. I had the sleep/wake button replaced by Apple and this is happening since then. I have rebooted the phone several times, to no avail. They also updated my software and battery. Does anyone have any suggestions?

    Thank you. I chatted with an Apple rep and they had me reset the phone and it didn't help. Have an appt at the Apple Store on Monday. I'll post the response here when I know something.

  • TS3274 my ipad won't charge / turn on despite pressing on/off button or home button.

    My ipad won't turn on / charge. I'm not sure which problem it is.  Despite charging a one month old ipad all night I cannot turn the ipad on. I have trie connecting the charger to a different socket and also via my laptiop but no joy. There is 'ding' noise when I connect the charger and no messages or battery icons on the ipad. Please can someone help as I desparately need my ipad for studying.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • My iPad won't charge, reboots all the time and is stuck at 1% battery.

    Since last evening, my Ipad hasn't been charging at all. When connected to a wall charger it recognizes that the charger is connected but normally there is a lightning icon that keeps blinking when the Ipad is charging correctly, that is not the case right now. The battery has been showing 1% since morning but its on and there is no low battery alert. Also yesterday the iPad kept rebooting every two minutes, today it has happened only a couple of times since morning. I have tried restore, hard reset, updating the software to iOS6, everything and still no luck.
    Has anyone else faced this issue? What could be causing this?
    Thanks
    Priyesha

    Yes, we all seem to have the same problem but nobody has offered a solution.  I've tried two different chargers, but it wont charge.  It seems to recognize that it is plugged into a charger and shows the lightning bolt but it's constant not flashing. If I unplug the charger then a plug appears next to the lightning bolt.
    It seem that the connector inside the iPad might be broken...or it's some kinda software iOS thing as somone mentioned earlier...but I dont know how to get the iOS to reset when I cant see the screen.
    Any thoughts

  • HT1688 My iphone 5 screen is flickering then going black and becoming unresponsive.

    I just bought this phone, it is up to date on software AND it has had a waterproof lifeproof case on it since day one. When the battery is low the screen flickers uncontrollably and fades to black or white, there are a bunch of sideways lines on it. This phone has NOT been dropped or gotten wet.

    Was this phone ever jalbroken?
    If restoring as new, without using a backup, didn't help, there is certainly a hardware problem that only replacement can fix.  Your warranty is void unless you return to the USA.  Short of that, finding a local independent iPhone repair center would be your only option

  • Screen freezes and goes white and whiter but works when moved?

    okay so my macbook had this issue with the screen where it will freeze and slowly turn brighter with horizontal distortion. when i tilt the screen back or forward it will flick for a few seconds then work normally.
    it started about a month ago and it's gradually getting worse and worse. now i actually have to 'stretch' the screen far back to see whats going on.
    i believe that it could be a connection issue between the monitor and the logic board but wont take it to a macstore just yet because i still want to find a way to fix it myself.
    another thing is- i've been reading some posts and im not the only user with this problem! i've found a good dozen of people with this same problem(occured between 12~18 months after the purchase) and it seems most of them, including myself, was too cheap to get apple care and has expired warranty.
    so please! if you know a way to fix this problem at home please please let me know!
    if you have this problem and your warranty expired and live in melbourne, we should visit a macstore and convince(or force) them to fix our macbooks free of charge

    Hey Friends,
    I have the same problem, it's not as bad as yours seems but its very annoying. It only happens when i use my skype and for a short while after, it doesn't seem like it really effects my computer other wise but it just worries me because I can't afford to pay for software problems and this is the second time my macbook has had a problem. >:( If you find a solution let me know please. 

  • Restoring T30 from recovery CD set and going round and round in circles!!!

    Hi!
    I bought an IBM ThinkPad T30 model 2367-8G3 from a computer fair which appeared to have originally been Scandinavian by the look of its keyboard!!!
    When I got it home I found it had a pirated copy of XP Pro VLK that practically every computer-fair reseller in the UK seems to use, so I wiped the HDD with a secure deletion tool and ordered a genuine set of three 2366/2367 Product Recovery CDs.
    The Recovery Program will run but aborts with a basic version of XP bit no IBM drivers, manuals or anything else, nor does it continue with CD2 & CD3 - if I reboot with CD1 again the Recovery Program will start, and pkunzip will execute the unpacking of innummerable files, from both CD2 & CD3 then ask for CD1 again and start with XP Text-Mode Setup ad-nauseum until I ended up with ***Six*** Boot Menu Entries for XP Professional, no IBM tools, drivers etc.,  on any ***one*** of 'em!!! Also there is ***No IBM_Service Partition*** either!!!
    1) Are the Motherboards locality - specific rendering a US/UK-set of Recovery cds useless?
    2) Somebody said it was a BIOS setting that caused this but didn't say what the setting-change needed was! I have upgraded to BIOS Version 2.10, Embedded Controller version 1.07.
    Has anybody solved this enigma, and if so can they please point me in the direction of a correct solution? I have Electronics Repair knowledge, so if there the motherboard has a locality-specific chip I can search for a dud one on ebay etc., and swap whatever it is that stores the localisation data!!!
    Many thanks,
    Chris Williams

    Chris, welcome to the forum,
    it sounds as though the drive hasn't been properly deleted. Even though you have "deleted" the drive I suggest you give Secure Data Disposal a try, using it at it's lowest level should suffice without writing a report to disc. Also make sure you reset your BIOS by selecting default settings and then in the BIOS Startup > Boot menu set the cd drive as first boot device.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Had my Iphone 4s in rain and then the screen started to do funny things. (going to different screens and going to turn off screen) Want to put in a bag of rice now but can't turn it off, its just keeps turning itself on. Any help on how to turn it off.

    As the header say any help on how to turn it off or just put it in the bag of rice and hope for the best as its down to 25 % power anyways

    When an iDevice gets wet the First thing to do is Turn it Off... leaving it on is not good.
    If you cannot Turn it off... go to your nearest Apple Store.

Maybe you are looking for

  • OMF Error 139  ( mob file not found)

    Just in case anyone else encounters this problem... I've seen posts about it in the past, but I'm not sure it ever got answered. I got error 139 when trying to export an OMF from 7.2 - long story short, the problem turned out to be that I was trying

  • How do i upgrade my iphone 3gs from 3.1.3 to latest firmmware?

    Here is what i've done so far. Downloaded the latest Itunes restarted computer Backed up my iphone downloaded the latest firmware(4.3.5) from ios 3.1.3 pressed update it gets as far as the beginning of the installation and displays an error: "The Iph

  • Problem with repair

    Hi just wondering has anyone had this problem with Lenovo I bought an idea centre 750 in November 2014 and it wasn't shuting down properly the fan would still run so I rang up and told them there was a hardware problem they were very nice on the phon

  • Aperture 3.02 vs iPhoto 8.12 Speed Difference

    Running on a 1 week old 17" i5 MacBook Pro. Aperture is slower than a dog. iPhoto does the same things 4-5 times faster. Library has less then 5,000 photos in it. Am I doing something wrong?

  • Frame counter or timer

    Does anyone know of a technique to show a timer inset or a frame count in the frame? I am making movies of screen captures as jpgs (roughly 3000 images). I tried the plug-in called Timer from cf/x and it crashed every way i set it up. Any ideas? than