IPad (4th gen) crash itself

I have ipad(4th gen) , it crash too much , when I start any app it leave the app and close it.
Please help me

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

Similar Messages

New Ipad (4th gen) crashed/froze three times in the last few hours.

After resetting it stays on the apple logo screen. No indication to connect to itunes (and it doesn"t connect)
I'm stuck on the appel logo screen and need some advice
Thanks

Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost.

IPad 4th Gen crashing and restarting automatically.

Sometimes, screen flickers prior to this, as if it were overheating. Already restored to factory defaults. Nothing. Works fine when idle, but crashes when i attempt to do anything. Any ideas?

Have you tried closing all apps in multi-task window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

Ipad 4th gen restarts randomly

Ipad 4th gen restarts itself randomly. Any one have any thoughts on why or what to do?

Well, if removing suspicious apps and restoring didn't stop the restarts, the last two things to try are recovery mode and then taking it to an Authorized Apple Service Center.
Here's how to do recovery:
http://support.apple.com/kb/HT1808
I suspect recovery will not change the behavior.
Here are the service providers:
Find an Apple Authorized Service Provider
... or if you live near an Apple Store, that would be even better.

IPad 4th Gen and Safari crashing, plus running like a slug after IOS7 upg

Since I updated my iPad 4th Gen with the latest IOS it has become the worst piece of electronic equipment I own, I received in February as a birthday present and now I feel it’s totally useless.
Safari crashes constantly, it takes forever to open any url I try to go to, I have multiple I mean multiple tabs/ or whatever they call them now that I just cannot close, Its runs like a dead slug, it’s so slow, it’s a absolute nightmare.
I would actually liken it to the early days of Microsoft’s first attempts at windows, yea I know I said it. I’m typing this on my Windows 8 pc and you know what it actually works very very well. Unlike my nice new IPad, which after the update does not, the problems are too numerous to mention. What are apple doing about it ? and has anyone found a solution - fix - workaround please.

I'm having the same issue. Safari is useless. I have tried numerous things to try to fix it and it is not working at all. It's slow and I can't close any tabs either. I just got my IPad 4 three weeks ago so I feel your pain. I wish Apple would fix this. I use Chrome and Mercury apps for browsing and they work just fine. However, I have no problems on my IPhone 4s with the update.

Ipad 4th Gen Siri runs by itself and reboots by itself

Ok SO I have this wacky Ipad 4th gen that was stuck in reboot mode with low battery.
I got past that and restored the Ipad now the thing will start Siri all by itself without me touching the home button and some times for no reason it will just shut down and restart by itself.
It seems on occasion the Sleep/Wake button will not communicate with Ipad or possibly teh Home button is stuck or something ad I have found that SIri starts all by itself and I cannot back out of apps some times by using the home button.
Could it possibly be something going on with teh home button itself and how would I go about testing it and possibly fixing it? Are they connections that can be cleaned with electrical contact cleaner? I have a couple different types that I use on my Peavey Amps and my Behringer Mixer so I know they are safe for plastics and switches, buttons , linier sliders etc..
I was in process of buying this from my neighbor then his wife wanted it back and it started erroring so she opened it and I am not sure if possibly it could of damaged a Ribbon or possibly teh memory cpu?
I cannot see anything obviously wrong with ribbons etc. Except the Digitizer cable did get bent and kinked a bit but it seems to work fine.

If the neighbor's wife opened the iPad up for any reason at all, I surely would not want to purchase it now. She may have done damage to it and I wouldn't take the chance.
If you don't want to shell out the cash for a new device, buy a refurb from Apple and get something reliable or some thing that at least has a warranty of some kind.
Leave the iPad and it's repairs for your neighbor and walk away.

My ipad 4th gen 32gb keeps crashing everytime i use a app that deals with a map?

I updated my ipad 4th gen 32gb to iOS 7 and since then anytime i use a app that deals with a map it crashes for instance find my iphone, find my friends and the built in map app on the ipad. I restored the ipad when it first started happening and its still doing it. I do the soft reset and it seems to do not a thing to help out the matter. The first time it happened i was using my built in map app and the ipad started crashing and wouldnt stop, it went on for like 3 hours kept turning on and turning right back off when it turned back on and it would do that for the whole 3 hours it probably crashed and turned back on 200 times. I had to do a command reset using itunes on my macbook pro to get it to stop doing it and ive not used the map app since because of it. So recently ive used find my friends and find my iphone and it would crash my ipad once and when it came back on it wouldnt crash again so i would just go and kill the app that caused it to crash.

I restored my ipad as a new ipad deleted all the backups for the ipad from my itunes and then set it up as new and put all my photos and music and apps back the way they was and i havent really messed with the apps with maps in it but the crashing is still happening and its happening inside the settings app id love if someone could help me out its starting to get pretty annoying. Thanks.

IPad 4th gen video streaming crash

Bought my iPad 4th gen a few days ago, upgraded straight away to iOS 6.0.1
Whenever I stream video the system crashes and the iPad screen goes black then reboots.
Has happened via YouTube from safari, embedded facebook youtube and also news websites.
Any ideas on what it could be?

Have tried restoring to factory via iTunes with no luck, will just return to place of purchase I think.

IPad 4th gen. ERROR *14(

Tried to do the iOS 7.0.6 update on my iPad 4th gen. now is saying that I need to restore it but everytime I start to restore via itunes it crashes with an error code (14). I have tried it on different computers and OS, different USB ports, tried disabling my antivirus and firewall but nothing works.Please help.

Hi Brenden,
Thanks for the help. Here is what I have tried so far and nothing seems to work.
1-Took it to the apple store only to hear from an apple associate that my iPad couldn't be repaired and they offered to replace it for $300 dollars. Really??? The warranty expired on Dec. 28, 2013 and besides my ipad crashed trying to do the software update to iOS 7.0.6.
2-Tried from four different computers with different OS.
3-Tried on Windows 7 with antivirus and firewall turned off.
4-Tried connecting to several different USB ports.
5-Tried DFU mode.
6-Change the host config.
7-Updated iTunes to latest and greatest.
8-I have the done Diagnosis test on iTunes and it passes all
Very frustasted that after all I was trying to do the iOS update and now I have a dead iPad. I have always been an apple advocate every since I got my firtst iPad but now I am start to realize that maybe I am wrong.
SOMEBODY PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks,
Emerson

Ipad 4th Gen not working at all

Hi
I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciated

Hi Try this Connect USB lead to pc hold down power button on iPad connect Lead To iPad still hold button down Wait to see if pc sees iPad keep button down for upto 1 Minute. If that doesn't work make An Appointment at Apple Store. Cheers Brian

How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?

You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting

Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6           (20040201)
AirPrint
PCL              (20040201)
PDF              (20040201)
PS                 (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
Heikki

Hi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki

How do I get my email address recently changed on my account in iTunes on my MacBook Pro to show up on the sign-on notice on my iPad (4th gen)?

How do I get my email address recently changed on my account in iTunes on my MacBook Pro to show up on the sign-on notice on my iPad (4th gen)? It reflects my old email address and therefore won't recognize my password. When I try to do something on the App Store on my iPad, it brings up a notice to sign on, which reflects the old email address, and rejects my password since the username/email address is no longer correct. Puzzled!

I have another question for the community. My daughter tells me that my texts to her show my primary email address as the account name of the sender (me) when I text her, rather than my cell phone number from which I'm texting her. I've had others report that to me too. How do I turn that off so that recipients see my cell phone number displayed as the sending party and not my email address? Thanks -

HT201471 What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

I think it must stand for "made of money" because this 4th generation ipad model 1460 is the most expensive.

Why is the FaceTime ring so low on the iPad 4th gen? I could barely hear it when it rings. I tell my friends to text me first so I wii know

Why is the FaceTime ring so low on the iPad 4th gen? I could barely hear it when it rings. I tell my friends to text me first so I wii know

Are you also using the same Apple ID for FaceTime, as listed under Settings > FaceTime?
If so, don't. While it's perfectly okay to share an Apple ID for iTunes & App Store, you shouldn't share an Apple ID with another person for the following:
iCloud
FaceTime
Messages
Use a unique personal Apple ID. Whoever is the actual owner of the current Apple ID needs to keep using that. The other person needs to make their own Apple ID, and use that for iCloud, FaceTime & Messages. Maybe even Game Center to be on the safe side.

IPad (4th gen) crash itself

Similar Messages

Maybe you are looking for