IPad (4th gen) image burn in/image retention

Has anyone had this issue with image retention or "burn in" on their new 4th gen iPad (lighting connector). I've attached an image taken with my iPhone 4 where I went from messages to "Letterpress" (a word game) where you can still see messages on the grey screen. I turned the iPad off and back on with the same retention being shown on screen. I've only had this thing for two weeks but it seems absolutely ridiculous that this is a problem. Any help or advice would be much appreciated.

Update:
Took my iPad to my local Apple Store. They said it was image retention and said they hadn't seen this on any devices before. They replaced it for another new one with no fuss or bother.  I have checked the replacement and at the moment it seems ok.
One thing I have not done yet is to update the software to iOS 6.0.1 I think I will leave iOS 6 (which was on the iPad from new) for the moment to see if all stays ok.  After a few days I will update to iOS 6.0.1 just to see if this is what causes the image retention problem. Hopefully this will not make any difference and all will be fine. Watch this space. . .

Similar Messages

  • I don't receive images in my e-mails on the iPad 4th gen.?

    How do I receive images in my e-mails on the iPad 4th gen., Without tapping load images at the bottom of the page?

    Use the Settings app.
    Settings > Mail, Contacts, Calendars > Load Remote Images > Turn ON

  • IPad 4th gen won't charge?

    I have recently got an iPad 4th gen (3 with lightning charger).
    Last night I was on youtube watching videos, when suddenly the screen went black.
    I plugged it into the wall, pressed the on switch.. it turned on and it was 1%.
    So I let it charge overnight (12:45am - 11:30am)
    I go down to see it and its STILL on 1%
    I use the plug (12WATT) that was provided in the box, and also the cable provided
    both seem to be working fine as it says my iPad is charging due to the lightning symbol in the corner next to the percentage..
    but my iPad will not budge past 1%
    I have tried the power button and home button reset... twice and it hasn't worked either time.
    Does anyone have any ideas why?
    And what should I do, because I really need to use it..?
    Update : I plugged it into my laptop and it now says 'Not Charging' in the top right hand corner?

    Hi Moll.x,
    If you are having difficulties charging your iPad, you may want to follow the directions listed in this article -
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Note that the article title says iPhone & iPod touch but the same steps are relevant to the iPad -
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • IPad 4th gen adaptor minor explosion

    can my ipad 4th generation be fix? this is the cause why my ipad totally turn blackout, it happened when i charge my ipad and suddenly i heard a sound that the adaptor encounter a minor explosion inside but never burned (adaptor and wire that i have used is the original from my ipad 4th gen. package). after i heard the  sound a few second our electric supply went-out and back again, and i check my ipad and notice it, it does not charging anymore. So i tried to check if the charger is working, i use the wire of the ipad 4th gen. and use the adaptor of my sister, its working. But when i tried the wire of the ipad mini and the adaptor of my ipad 4th gen. found-out that the adaptor is defective. Just to fully charge my ipad 4th gen. i use my sister ipad mini charger. when i use my ipad i notice several glitches or malfunction, using it for few minutes it will automatically shut down and when i turning it on the power button wont work, i tried hard press on the power and home button at the same time, and its work to turn it on but every time i don't use the ipad it will automatically shutting down. and the following day my ipad totally turn blackout. and i have done several restoration process in my macbook pro i always got a several pop-up error messages (error 9 / error 40 and so on...) from itunes. i feel hopeless of my ipad 4th generation case, i bought my ipad February 2013.
    Please help me... 

    Does anyone know the action of apple addressing a charger malfunction or exploded charger...?

  • Ipad 4th Gen not working at all

    Hi
    I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
    iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciated

    Hi Try this Connect USB lead to pc hold down power button on iPad  connect Lead To iPad  still  hold button down Wait to see if pc sees iPad keep button down for upto  1 Minute. If that doesn't work  make An Appointment at Apple  Store. Cheers Brian

  • How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

    Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there?  How can you do this?

    You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrintin​g

    Hi,
    I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
    Ipad(4th gen) cannot connect to printer for AirPrinting.
    Wireless Direct is set on in the printer.
    When I choose to connect to printers own wifi network with my Ipad, it can't connect.
    (Ipad doesn't show the wifi symbol on top left corner.)
    And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
    I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
    Device Configuration show this:
    Installed Personalities and Options
    PCL6           (20040201)
    AirPrint
    PCL              (20040201)
    PDF              (20040201)
    PS                 (20040201)
    I wonder why AirPrint has empty value? (what ever this  might mean)
    Br,
    Heikki

    Hi,
    Thank you for your reply and first action plan to find a quick fix.
    Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
    Same problem also when I try to print so that both Ipad and printer are  connected to my home WLAN/DSL-router.
    I don't see any problems for the printer to connect my home WLAN,  both printer and Ipad has received an IP address from the WLAN router.
    My router model is Zyxel AMG1202-T10B.
    Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
    I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
    Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
    Here is the network settings from HP Device Toolbox:
    Network Summary
    TCP/IP(v4)
    Status (Wireless) Ready
    IPv4 Address: 192.168.1.38
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
    DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
    WINS Server: 192.168.1.1
    Preferred DNS Address: 192.168.1.1
    Alternate DNS Address: 0.0.0.0
    TCP/IP(v6)
    Status: Disabled
    Network Identification
    Host Name: NPI08C7AB
    Domain Name (IPv4/IPv6):
    Domain Name (IPv6 only):
    Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
    Bonjour Domain Name: NPI08C7AB.local.
    Bonjour Highest Priority Service: IPP Printing
    Wired Network Configuration
    Status: Not Connected
    Hardware Address: 2c:44:fd:08:c7:ab
    Link Speed and Duplex Negotiation: Automatic
    Auto Crossover: Enabled
    Wireless Network Configuration
    Status: Connected Wireless: On
    Network Name (SSID): Galactica
    Communication Mode: Infrastructure
    Authentication Type: wpa-psk Encryption: tkip+aes
    Hardware Address: bc:85:56:ee:02:d3
    Access Point Hardware Address: 28:28:5d:7c:23:a0
    Channel: 10
    Signal Strength: Excellent
    Wireless Direct Setup
    Status Enabled
    Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
    Direct Printing Channel 10
    IP Address 192.168.223.1
    SNMP
    Status: Read-Write Access Enabled
    SNMP Version: 1
    Set Community Name: Not Specified (Defaults to 'public')
    Get Community Name: Not Specified (Defaults to 'public')
    Network Statistics
    Total Packets Received: 428
    Unicast Packets Received: 414
    Bad Packets Received: 0
    Framing Errors Received: 0
    Total Packets Transmitted: 493
    Unsendable Packets: 10
    Transmit Collisions: 0
    Transmit Late Collisions: 0
    WS-Print Users: 0
    Enabled Features
    IPv4: Enabled
    IPv6: Disabled
    DHCPv6: Enabled
    LPD Printing: Enabled
    Bonjour: Enabled
    SLP: Enabled
    WS-Discovery: Enabled
    SNMP: Enabled
    Show IP Address: Enabled
    LLMNR: Enabled
    Security PJL Security: Disabled
    Please let me know if you need any other additional information.
    Br,
    Heikki

  • How do I get my email address recently changed on my account in iTunes on my MacBook Pro to show up on the sign-on notice on my iPad (4th gen)?

    How do I get my email address recently changed on my account in iTunes on my MacBook Pro to show up on the sign-on notice on my iPad (4th gen)?  It reflects my old email address and therefore won't recognize my password.  When I try to do something on the App Store on my iPad, it brings up a notice to sign on, which reflects the old email address, and rejects my password since the username/email address is no longer correct.  Puzzled!

    I have another question for the community.  My daughter tells me that my texts to her show my primary email address as the account name of the sender (me) when I text her, rather than my cell phone number from which I'm texting her.  I've had others report that to me too. How do I turn that off so that recipients see my cell phone number displayed as the sending party and not my email address?  Thanks - 

  • HT201471 What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

    What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

    I think it must stand for "made of money" because this 4th generation ipad model 1460 is the most expensive.

  • Why is the FaceTime ring so low on the iPad 4th gen? I could barely hear it when it rings.  I tell my friends to text me first so I wii know

    Why is the FaceTime ring so low on the iPad 4th gen? I could barely hear it when it rings.  I tell my friends to text me first so I wii know

    Are you also using the same Apple ID for FaceTime, as listed under Settings > FaceTime?
    If so, don't.  While it's perfectly okay to share an Apple ID for iTunes & App Store, you shouldn't share an Apple ID with another person for the following:
    iCloud
    FaceTime
    Messages
    Use a unique personal Apple ID.  Whoever is the actual owner of the current Apple ID needs to keep using that.  The other person needs to make their own Apple ID, and use that for iCloud, FaceTime & Messages.  Maybe even Game Center to be on the safe side.

  • My ipad 4th gen touch screen is not working in one area

    I had a screen replacement and now the Ipad 4th gen touch screen is not working in one area ( a strip across the middle). We tried 3 different touch screens with digitizer...any ideas?

    Since Apple doesn't replace screens, they replace the iPad, I presume you had your screen replaced by an unauthorized service provider or perhaps you replaced it yourself. That voids the warranty and the ability to get assistance from Apple. If someone else replaced your screen take it back to them and demand the correct the problem.

  • I have iPad 4th gen but my iMessage is not working

    I have iPad 4th gen I was trying to send message but it's not working
    It says not delivered and number is on red

    http://support.apple.com/kb/TS1827

  • I just purchased an iPad 4th gen, and the camera app is malfunctioning. What can I do to correct it?

    I just purchased an iPad 4th gen, and the Camera app is malfunctioning.  Is there a way to troubleshoot and/or reload the software?

    AirPlay: iOS and Mac

  • I am not able to open or view PDF files on my ipad 4th gen.

    I am not able to open or view PDF files on my ipad 4th gen.

    Hello,
    This looks this issue is specific to this particular banking site and we definitely want to know more to help resolve this issue. It is likely that this particular functionality is not supported on Firefox and I would suggest that you report this to the bank and request them to support it soon.
    That said, there are a few things you can do from the details provided in the [[Websites don't load - troubleshoot and fix error messages]] SUMO article. Specifically, the section about [[Websites look wrong or appear differently than they should]] and reporting the website might help us provide more information.
    If this is a banking site used by any of the other volunteers who are willing to dig more to find out why, they will try to provide the resolution sooner.
    I know this is not really a resolution that will help you, but given that I don't have much information as to what is the offending part of the website causing the issue, I can only suggest this much.
    Thank you

  • Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

    Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
    Any ideas greatly appreciated, it will save me a journey to the apple store

    I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

  • HT5957 I can't update to IOS 7.0.2 on my IPad 4th Gen

    Can't upgrade to IOS 7.0.2 on my IPad 4th Gen because the default prompt in software updates is for 7.0 !  Does anyone know how to force a 7.0.2 update? I certainly don't want to struggle with the original pre-fixes 7.0 version ... Txs. PT

    Try updating it through iTunes on the computer instead of over wifi on your iPad

Maybe you are looking for